Great tips, thank you! Another great thing to do, before you start a project, is to prepare one, or two, more bobbins so you don’t have to stop in the middle of a project and have to wind up some new bobbins ;)
I've been sewing all my life but still enjoy watching tips as one can keep on learning new things. I jotted down 3 tips you gave to use or buy. Thank you for an excellent presentation, right to the point.
To clarify about the spool pins for anyone who is new or doesn't know... There are two types of spools as far as how they wind them. Straight wind like coats thread (looks like a normal straight wind) and top wound like gutermann (when looking at the thread on the spool it looks like it's wound on an angle/diagonal like diamonds) For straight would you want to put it on the accessory pin so the thread unwinds from the side. If you have top wound it's better to use the sideways pin to be unwinding from the top of the spool when sewing. Straight wound is wound onto the spool from the side so should be unwound from the side. Top wound is from the top with an oscillating angle arm so unwinds better from top or bottom. If either are used in the opposite way you end up with twisting in the thread and can throw off your tension and even cause thread breakage. Just an FYI
Great tip about checking your thread in the needle before you go and fit it in the machine! Never thought of doing that but it makes great sense! Thank you!
Great info! Thank you…the changing needle advice is SO accurate! Image never changing the razor blade and shaving with the same one for a year..dragging it across you skin and causing razor rash and cuts. Each of your tips are so spot on and much appreciated.
Been sewing over 25 years but loved your tip on wetting the back of the needle and also threading the needle onto the thread you will be using! Just shows you’re never to old or experienced to learn!
Thank-you, especially about moistening the back of the needle instead of the thread! You may add there, that if you cut an inch wide piece off of a 3 X 5 index card, you can hold it behind the needle. This will help see the hole better, especially for us older folk. I keep one next to the machine, right by my pin box.
That was so interesting. Wetting back of the needle and seeing if right cotton for needle size. Great tips, you are never too old to learn something new.
l like the way you present your material in clear concise terms. Thank you. i hope that you will make a tutorial on exactly HOW to use the walking foot and the foot used to narrow hem sheer fabric. Thank you.
Also instead of tape as a guide to help you sew in a straight line you could use a rubber band. It doesn't make you machine sticky and you can slide it to whatever measurement you need!
Another very important tip is the thread. Cotton will not stretch, polyester will so if you're sewing stretchy fabric, you must use polyester. I destroyed I don't know how many projects because I wasn't using the right thread until someone mentionned it to me at the fabric store. I ended up thinking Guterman (the thread I usually buy) was bad quality. Turns out Guterman is of excellent quality, I just wasn't using the right type of thread.
Dear Carol, Thank you for contacting us. I appreciate your feedback and it has been forwarded to the proper department. Your comments are important to us and help with the development of our online video streaming community. We will continue to listen and work hard for your complete satisfaction. Sincerely, Lindsay National Sewing Circle Video Membership
When you change your needle, write the size down on aa sticky note or a piece of tape and put it on the side of your machine. I tend to forget what needle is in my machine.
Yes I know but once it’s in the machine you can’t see the etching. I don’t want to have to take it out to figure out what is in there and sometimes the etching is hard to read.
Marg Des it’s not that complicated. One little sticky note or piece of tape that’s easy to see is easier than taking out my needle like you suggested. If you do different things great for you. I have trouble reading the little numbers on the needle. So to each their own.
Marg Des it’s actually less complicated than what you suggested. I can sit down and easily see what size I have in the machine without having to futz around with pulling out my needle.
Nice video. You hit all the important bits. The manuals are great (but I'll read anything anyway) especially for new sewers. They not only tell you everything about the machine but the sewing techniques as well.
Those are great tips and will help the beginners like myself who is new to sewing and I just received a new Singer model 2277 machine and have not used it yet until I can get the supplies, thread, and material to work with. The video you provided have tips which will help me in my hobby and I thank you so very much for helping us new users.
I've been sewing over 60 years and my eyes aren't as sharp as they use to be, so I've found that before you thread the needle cut the thread like you're cutting it on the bias instead of cutting straight across the thread and it makes a point, even if you can't see the point. This has made threading needles easier for me. Of course I moisten it before I thread the needle and this helps a lot. I too appreciate that Ellen gets right to the subject instead of having a long, boring preliminary speech.
THANK YOU!! I am coming back to sewing after a looooonnnnnggg absence, and one other tip for me to do is READ the pattern at least twice before starting. I made an apron and did not do two of the steps and the seam ripper became of dear friend again. I have saved this video and will refer back to it again.
A great tutorial. Until 5years ago I , I knew nothing about how to work a sewing machine. I wish I had seen your video then, it would have been so helpful. Please can we have some more, I am still learning?
Hello Joel, If you like videos like these. We have a Premium Membership for only $5.55 for the first year! I have provided you the promotional link here: go.nationalsewingcircle.com/c18238
Tip: When hand sewing, make sure you thread needle prior to snipping from spool. Why? Because once cut, you may be trying to shove fuzzy (wrong) end into the needle's eye. Thread is spun in a certain direction so make it easy on yourself and thread needle BEFORE you clip thread from spool so that it glides easily through needle's eye! 😊
Jude Jane I didn't know that! Is that why sometimes when I sew, the thread curls after a while so I have to keep spinning the needle in my fingers so it doesn't get in a knot?
@@CraftsByKelso in all honesty, any thin oil that doesn't clump up will work well. I have used the apocryphal WD-40 for the machine's internals with no issues. For reference, I have used it on a long-arm leather stitcher and in an older White brand sewing machine with a cast frame.
Thanks so much for these tips - it’s always good to be reminded of things. I really find the sewing community to be so helpful to each other and that’s a great feeling!
Spot on. As a teenager, I took a class from an older sewing lady. One thing she always stressed is “If you sew, you rip”. I still think of her when I get frustrated and have to rip.
Hehehe!! My Mom wouldn’t let me sew anything until I could stitch straight AND rip out entire seams and resew them!! That was about 55 yrs ago and I still remember those lessons. And I still have her seam ripper💕
Fantastic video! I keep chapstick by my sewing machine. Condition my lips then the thread. I have auto needle threaders, and I never use them. It is so much easier to just thread it.
Gosh! This brought back some memories of school days. So glad, l found your channel! Ive got a 1970 sewing machine, haven't tried to use it yet! But you've inspired me. If l need, any help! I know where tp come. Happy sewing! Moira From England.
Greatest tips ever! Wish I had viewed this before I made a minky/fleece baby blanket. It was a nightmare without the temporary spray adhesive! Thanks again.
Thank you! It looks like you have a really good machine, mine isn't so good, there's a lot of things you mentioned I don't have, but the gist of it I understood. My eyes kept going to the model (?) on the shelf behind you, it almost looks like a Singer sewing machine my mother used to use. I realize it's not but my mom used to sew a lot, also my uncle used to work for Singer.
Excellent vid. The seam ripper that came with my machine also has a little hole in the handle. It's for holding the needle when you are putting a new needle in or taking it out. It makes the whole operation less of a flaff.
Thank you so much! I learned many things from you. I also bought a magnetic seam guide. Love, love it! Truly keeps sewing on correct seam allowance. Thanks again!
I’ve had my machine 30 years I’ve never read my manual, but I always know were it is 😜 I did take a class for my machine when I purchased it. Thanks for the tips 😘
Thanks so much for the great tips, as I am new to sewing I am always looking for things that will improve my work an make things easier. I found your tips to be very helpful.
THANK YOU!!!! I don't have a great machine, such as yours...however, I learned so much about the presser feet!! Tell me, would a walking foot help when going through different thicknesses such as top stitching?
That needle tip is so so so true. My tension was off...so I thought, my thread was fraying,...bad thread I thought. Well it was my needle. Wise advise young lady. So many people skip the basics, interestingly enough, these basics make everything easier. Enjoyed your video. Darlene
61yo sewing since I was 8 and just learned from you to moisten the back of the needle to facilitate threading. Thank you SEW much! P.S. Maybe in future, show items against contrasting background to make them more visible, such as seam rippers near end of video.
Hello Lucie, I do not see that your active Premium customer. Our Ask Expert Program is for those Premium members. Here is a link to our Premium membership at a deep discounted rate: go.nationalsewingcircle.com/C21388
Lucie Woolery i dont moisten the thread when threading ,i just snip it a half cm.clean and I always have a piece of hard white paper beside me(i insert it in belt like fabric i attached to my machine for pins)i hold that white paper behind the needle to see clearly the needle eye and it’s a great help 😊
Brand new sewer, basically clueless at this point. Appreciate your presentation style, very clear and calming. Although I did read the machine manual, I don’t speak the language, so of course I don’t understand half of what I read. This was helpful, as the manual certainly doesn’t teach you how to sew, it assumes you already sew, and just need to know where the pokey end is located.
Great tips! I didnt know about wetting the needle tip to thread your needle. Will try that as my automatic threader was bent and I just started to sew and couldn't really see what I was looking for to try and get it back into place. Also like the tip about testing to see how the thread on the needle to see if its the right size.
Clear and informative, no music, no drama, enjoyed watching it. So refreshing to see.
Thank you so much. If any query can ask.
If can share to interested people.
Thanks again 👍
Thankyou listening to tips 2.or 3 times doesn't hurt anyone. Thanks never too old might learn somethimg you missed or forgot.
That’s so funny, I also was thinking she just jumped right into it. How refreshing. She knew we didn’t care about the story of her life.
Thank you so much. Can ask any query, if you have any.
If can Share to interested people.
Thanks again 🙏
Great tips. I also love that you don’t have annoying background music going on!
Yes.
Great tips, thank you!
Another great thing to do, before you start a project, is to prepare one, or two, more bobbins so you don’t have to stop in the middle of a project and have to wind up some new bobbins ;)
Still relevant 7 years later ❤️❤️❤️ thank you. God bless.
I've been sewing all my life but still enjoy watching tips as one can keep on learning new things. I jotted down 3 tips you gave to use or buy. Thank you for an excellent presentation, right to the point.
MY Name is also Nancy been sewing beginning with doll clothes have learned many great tips along the way never to old to learn ALOHA
@@nancyollis1049 ddd
To clarify about the spool pins for anyone who is new or doesn't know...
There are two types of spools as far as how they wind them. Straight wind like coats thread (looks like a normal straight wind) and top wound like gutermann (when looking at the thread on the spool it looks like it's wound on an angle/diagonal like diamonds)
For straight would you want to put it on the accessory pin so the thread unwinds from the side. If you have top wound it's better to use the sideways pin to be unwinding from the top of the spool when sewing.
Straight wound is wound onto the spool from the side so should be unwound from the side.
Top wound is from the top with an oscillating angle arm so unwinds better from top or bottom.
If either are used in the opposite way you end up with twisting in the thread and can throw off your tension and even cause thread breakage.
Just an FYI
Threading the needle before you install it is a game changer for me. What an excellent idea! Thanks for the great tips. 😊
Yes, but it only works the first time you install it. Do you really want to remove the needle each time after that to thread it?
Great tip about checking your thread in the needle before you go and fit it in the machine! Never thought of doing that but it makes great sense! Thank you!
Thanks so useful.
Thank God you get right to the point without going into your whole life story first like sooooo many other Y tubers.
Agree
Agree as well.
Yes and also the loud annoying music.
pearlgirl011 couldn’t agree more.
@@wendyj745 Its a real pain in the a&& when you get these blathering women, YAP, YAP, YAP, they just love the sound of their own whining voices!!
Great info! Thank you…the changing needle advice is SO accurate! Image never changing the razor blade and shaving with the same one for a year..dragging it across you skin and causing razor rash and cuts. Each of your tips are so spot on and much appreciated.
Glad you enjoyed it!
Been sewing over 25 years but loved your tip on wetting the back of the needle and also threading the needle onto the thread you will be using! Just shows you’re never to old or experienced to learn!
Thank-you, especially about moistening the back of the needle instead of the thread! You may add there, that if you cut an inch wide piece off of a 3 X 5 index card, you can hold it behind the needle. This will help see the hole better, especially for us older folk. I keep one next to the machine, right by my pin box.
Yes, my mom has been doing exactly that for so many years!!
When my sewing mentor first told me that I asked her how in the world she got her tongue down there! I’m waaaay too literal🤣🤦♀️🤣
I just tried this on my hand needles and it worked great for those as well!
@@Kyle-mt5wr Hey, why didn't I think of that? Thanks!
Wow! I learned something new in my 85th quilting year. Cant wait to hit my stash treasures.
Thank you for the tips-I find them very helpful.
I encountered ur video by chance due to Corona quarantine. I feel lucky to pick up these facts and tidbits from ur experience. Thanks for sharing. 😍
Thank you sister for sharing your tips
That was so interesting. Wetting back of the needle and seeing if right cotton for needle size. Great tips, you are never too old to learn something new.
Glad it was helpful!
l like the way you present your material in clear concise terms. Thank you. i hope that you will make a tutorial on exactly HOW to use the walking foot and the foot used to narrow hem sheer fabric. Thank you.
Love the one about the presser foot when threading, never knew that.
Also instead of tape as a guide to help you sew in a straight line you could use a rubber band. It doesn't make you machine sticky and you can slide it to whatever measurement you need!
Brainey Janey
Great tip. Thx
Brainey Janey thank you
Brainey Janey of
What a brilliant idea, thank you!
Yes, and you can use painters tape, which leaves no residue.
Another very important tip is the thread. Cotton will not stretch, polyester will so if you're sewing stretchy fabric, you must use polyester. I destroyed I don't know how many projects because I wasn't using the right thread until someone mentionned it to me at the fabric store. I ended up thinking Guterman (the thread I usually buy) was bad quality. Turns out Guterman is of excellent quality, I just wasn't using the right type of thread.
Funny... The Guter in Guterman means "good" so basically "good man" or alternatively "the man that sells stuff". Yes, Guterman is the real thing.
Indeed. I have many a type of thread for that purpose entirely. Many of which are thick Nylon thread, unlikely to break under stress in workwear.
what kind of polyester thread do you use for stretchy fabrics?? and what needle? and what stitch and what tension?
Thank you for the advice! I hope I’m able to remember it 😊
another problem with stretchy fabric is cutting it, if you cut it it doesn't come out even
God Bless you and your family. We need this kind of loving family in our sewing world today.
Dear Carol,
Thank you for contacting us.
I appreciate your feedback and it has been forwarded to the proper department. Your comments are important to us and help with the development of our online video streaming community. We will continue to listen and work hard for your complete satisfaction.
Sincerely,
Lindsay
National Sewing Circle Video Membership
Thank you for the GREAT sowing hacks.
When you change your needle, write the size down on aa sticky note or a piece of tape and put it on the side of your machine. I tend to forget what needle is in my machine.
Yes I know but once it’s in the machine you can’t see the etching. I don’t want to have to take it out to figure out what is in there and sometimes the etching is hard to read.
Marg Des it’s not that complicated. One little sticky note or piece of tape that’s easy to see is easier than taking out my needle like you suggested. If you do different things great for you. I have trouble reading the little numbers on the needle. So to each their own.
Marg Des I don’t need it to be fine with you.
Marg Des it’s actually less complicated than what you suggested. I can sit down and easily see what size I have in the machine without having to futz around with pulling out my needle.
Marg Des it was your tone which was very condescending.
I purchased a good sized seam ripper! Brilliant as these old hands need all the help they can get!
Great idea with adhesive 👏👍
Nice video. You hit all the important bits. The manuals are great (but I'll read anything anyway) especially for new sewers. They not only tell you everything about the machine but the sewing techniques as well.
Thank you. Been sewing for 45 years and have never heard of wetting the back of the needle to thread. Going to try it. Thanks for the tips: )
You are so welcome!
These are here for a reason. BEST ADVICE EVER!!!
Those are great tips and will help the beginners like myself who is new to sewing and I just received a new Singer model 2277 machine and have not used it yet until I can get the supplies, thread, and material to work with. The video you provided have tips which will help me in my hobby and I thank you so very much for helping us new users.
Hello there. Thank You for your suggestions-&-thank you for helping all of US. All very important suggestions of yours!
I've been sewing over 60 years and my eyes aren't as sharp as they use to be, so I've found
that before you thread the needle cut the thread like you're cutting it on the bias instead of
cutting straight across the thread and it makes a point, even if you can't see the point.
This has made threading needles easier for me. Of course I moisten it before I thread
the needle and this helps a lot. I too appreciate that Ellen gets right to the subject instead
of having a long, boring preliminary speech.
I love your sewing tips .Thank you 😊 God Bless you
THANK YOU!! I am coming back to sewing after a looooonnnnnggg absence, and one other tip for me to do is READ the pattern at least twice before starting. I made an apron and did not do two of the steps and the seam ripper became of dear friend again. I have saved this video and will refer back to it again.
Thank you I learned something new
Good basic tips. Clear and to the point!
Painters tape works great and it doesn’t leave any sticky adhesive.
In the UK we call it ‘masking tape’
Great information
Also, electrical tape works just perfectly!
Thankyou so much for these tips. Would like to hear more from you
Thank you!!!! Your tips were WONDERFUL! I am brand new to sewing and am trying to learn good habits to practice before starting my first project!!!
Thank you!
Welcome!
A great tutorial. Until 5years ago I , I knew nothing about how to work a sewing machine. I wish I had seen your video then, it would have been so helpful. Please can we have some more, I am still learning?
These were all so helpful! Thank you!
Insightful. Thankful
Great video! I'm just starting and you made you great points!
Glad it was helpful!
Very useful information with no waffle or filler content. Thank you🌟
Thank you so much for getting to, and staying on point. Many UA-camrs talk for too long as a preamble, but you were perfect!
Nicely done. Thumbs up for the needle/thread sizing trick and the threading trick. Kudos you.
Hello Joel,
If you like videos like these. We have a Premium Membership for only $5.55 for the first year! I have provided you the promotional link here: go.nationalsewingcircle.com/c18238
Tip: When hand sewing, make sure you thread needle prior to snipping from spool. Why? Because once cut, you may be trying to shove fuzzy (wrong) end into the needle's eye. Thread is spun in a certain direction so make it easy on yourself and thread needle BEFORE you clip thread from spool so that it glides easily through needle's eye! 😊
so, what is the "good end" the beginning or end of the clipped piece of thread?
Jas Blake The beginning where it is coming off of the spool. Thread the needle and then snip the thread and knot it.😊
Jude Jane I didn't know that! Is that why sometimes when I sew, the thread curls after a while so I have to keep spinning the needle in my fingers so it doesn't get in a knot?
SusanMc 6946 Yes, that is why!
Great reminders sometimes we forget what we learned in our beginning years thanks.
Also remember to clean your machine regularly. Removing lint is a good thing !
Especially if you are sewing in flannel or Minky.
Excellent tip. I keep small stiff artist's paintbrushes on hand for linting, and often remove the spool case and race to clean and polish them.
Clean AND oil and never with 3 in 1 Oil.
@@linhun944 What type of oil?
@@CraftsByKelso in all honesty, any thin oil that doesn't clump up will work well.
I have used the apocryphal WD-40 for the machine's internals with no issues.
For reference, I have used it on a long-arm leather stitcher and in an older White brand sewing machine with a cast frame.
Thank you for your sewing tips. For a beginner, this was helpful. 👍
Thanks so much for these tips - it’s always good to be reminded of things. I really find the sewing community to be so helpful to each other and that’s a great feeling!
Very good tips thankyou
Thank you, I learnt a lot.
Excellent guides. Great instructor, easy to follow her tips and understand
The reasons and purpose of each tip. Thank you.
Spot on. As a teenager, I took a class from an older sewing lady. One thing she always stressed is “If you sew, you rip”. I still think of her when I get frustrated and have to rip.
Sometimes I rip more than I sew.
@@lsuessenguth3801 :-)
“God loves a happy ripper!”
Hehehe!! My Mom wouldn’t let me sew anything until I could stitch straight AND rip out entire seams and resew them!! That was about 55 yrs ago and I still remember those lessons. And I still have her seam ripper💕
Boy! Invaluable tip! Thanks so much.
Watched this twice…thanks
Excellent advices, very helpful. Thank you
Fantastic video! I keep chapstick by my sewing machine. Condition my lips then the thread. I have auto needle threaders, and I never use them. It is so much easier to just thread it.
Gosh!
This brought back some memories of school days.
So glad, l found your channel!
Ive got a 1970 sewing machine, haven't tried to use it yet! But you've inspired me.
If l need, any help! I know where tp come.
Happy sewing!
Moira
From England.
What kind of machine is it
Wow! Thanks for the minky/spray glue hint! I love sewing with minky but will love missing the sloppy struggles it brings!
Nice tips, thank you
Thank you for these great tips
Great tips! Thank you 😊 I love my Janome...it’s over 20 years old still works great.
Greatest tips ever! Wish I had viewed this before I made a minky/fleece baby blanket. It was a nightmare without the temporary spray adhesive! Thanks again.
Loved this, straight to the point.
Nice tips - thanks for sharing
Thank you haven't been buy machine for over 25 years.finally got a machine.so thanks for help
And great refresher course.
I loved the tips you gave. The best one was application of moisture at the back.All Your tips were explained in a very easy manner Thank you.
great tips......thank you!!
Thank you! It looks like you have a really good machine, mine isn't so good, there's a lot of things you mentioned I don't have, but the gist of it I understood. My eyes kept going to the model (?) on the shelf behind you, it almost looks like a Singer sewing machine my mother used to use. I realize it's not but my mom used to sew a lot, also my uncle used to work for Singer.
Excellent vid. The seam ripper that came with my machine also has a little hole in the handle. It's for holding the needle when you are putting a new needle in or taking it out. It makes the whole operation less of a flaff.
Sawing lessoning on a 3140 singer machine
Well I never knew that! Great tip thanks.
Thank you so much! I learned many things from you. I also bought a magnetic seam guide. Love, love it! Truly keeps sewing on correct seam allowance. Thanks again!
A magnet seam guide is great, but I have heard the they should not be used with computerized machines!
Great tips, thank you 📍😊
You are so welcome!
I’ve had my machine 30 years I’ve never read my manual, but I always know were it is 😜 I did take a class for my machine when I purchased it. Thanks for the tips 😘
Thank you for your tips, I have difficulty sewing straight so do you have any other name of gadget that i can purchase that will be helpful ?
love your tips .I am beginner and your advise are just a gold mind for me .Thank you for sharing .
Amazing tips. Best video I've seen in so long!
Thanks so much for the great tips, as I am new to sewing I am always looking for things that will improve my work an make things easier. I found your tips to be very helpful.
I have never heard of moistening the needle before, will certainly try that! :)
All excellent tips and well presented! Thank you!
That was great advice specially for me since I am a beginner. Thanks.
THANK YOU!!!! I don't have a great machine, such as yours...however, I learned so much about the presser feet!! Tell me, would a walking foot help when going through different thicknesses such as top stitching?
I look forward to trying the threading tip. My automatic threader is quirky, and it can be very hard to thread even with reading glasses.
Great tips thank you!
That needle tip is so so so true. My tension was off...so I thought, my thread was fraying,...bad thread I thought. Well it was my needle. Wise advise young lady.
So many people skip the basics, interestingly enough, these basics make everything easier.
Enjoyed your video.
Darlene
Very informative. Thanks.
Thank you for your very informative tips and videos! Really enjoy watching and learning more! 👏
Glad you like them!
Great tip about moistening the back of the needle to thread the machine needle. Thank you.
Thanks! I learned a few things I can use. Wish I'd had that spray for a drapery project I'm nearly finished with.
Thanks for the great tips & Love that black vintage machine on the shelf 👍🏻
61yo sewing since I was 8 and just learned from you to moisten the back of the needle to facilitate threading. Thank you SEW much! P.S. Maybe in future, show items against contrasting background to make them more visible, such as seam rippers near end of video.
Hello Lucie,
I do not see that your active Premium customer. Our Ask Expert Program is for those Premium members. Here is a link to our Premium membership at a deep discounted rate:
go.nationalsewingcircle.com/C21388
Lucie Woolery i dont moisten the thread when threading ,i just snip it a half cm.clean and I always have a piece of hard white paper beside me(i insert it in belt like fabric i attached to my machine for pins)i hold that white paper behind the needle to see clearly the needle eye and it’s a great help 😊
These are excellent tips!!! I’ve been sewing for a long while and didn’t know many of these things!! Thanks so much! xoxo
Glad it was helpful!
Brand new sewer, basically clueless at this point. Appreciate your presentation style, very clear and calming. Although I did read the machine manual, I don’t speak the language, so of course I don’t understand half of what I read. This was helpful, as the manual certainly doesn’t teach you how to sew, it assumes you already sew, and just need to know where the pokey end is located.
Great tips! I didnt know about wetting the needle tip to thread your needle. Will try that as my automatic threader was bent and I just started to sew and couldn't really see what I was looking for to try and get it back into place. Also like the tip about testing to see how the thread on the needle to see if its the right size.
Glad it was helpful!
Great advice. Thanks for sharing!
Truly enjoyed your video. Great tips. Thank you
Basting spray and surgical seam ripper thanks for great recommendations!