The best thing I've used for applying foam grip tape is using 250 grit sandpaper because it can shape to the side of the board and make a nice bevel. It can also be used on the surface of the tape to wear it in a bit
I came here to say thus exact thing lol works with plastic tech decks 😆 I did this when I was a kid for sure but only gave mine a slight bend to much and jt looked weird 😅
8:31 I cannot believe my hack made it in! I should have been a bit more specific, it works better with plastic wheels to give them more grip. Thanks fire including mine! I love your content!!!
The rubber band water balloon bushings are the only bushing I usually use and if you use a pop it and a hole puncher it makes good bushings and you can do that for Lego tires and a hole puncher they all work
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
I use pieces of bicycle repair patches as bushings and it makes a Tech Deck actually usable! I also clean my tech deck griptape with a slightly wet toothbrush once a week. Not too wet... don't wanna ruin the griptape. I hate it when my griptape is all dirty with dead skin cells.😅
Hey @TheGripsion I really enjoyed the video but I think the person with the "hack" :heat up the board for better pop meant heat up a Teck Deck and bend the tail more up to have a bigger pop
Great video bro, I’ve never really delved into this rabbit hole. But it looks very interesting. I wonder if there’s anyone that’s tried with their feet!?!
the deck heat up trick is for plastic tech decks. Back in my day, we would heat up the tail and nose so we can bend them, let them cool, and now you have higher kicks
If you use a foam sandpaper block with velcro attaching sandpaperpads you can get a nice perfect clean griptape edge and in nice single fluid strokes around the deck in a downward slight angle motion with even force and you will get the perfect edge.
Can someone help me like bruh.. alright so the problem is whenever i put masking tape on my grip tape, the griptape has some of these random lines that the masking tape took..
Your so lucky to have such good beater boards and expensive trucks, im still using My First wooden board that is 32mm and really bad with not responsive trucks and non bearing wheels🙂 i love your videos! Keep it up❤
I tried gluing the axel, and it actually worked! It was hard to get the nuts on before gluing the axel, so if you can't manage to get your nuts on the axel just use some gorilla glue.
For a tech deck nuts you take a pair of pliers and squish it the slightest amount, it’s easy to overdo it so be careful. It works but it should be a last resort type thing
The best thing I've used for applying foam grip tape is using 250 grit sandpaper because it can shape to the side of the board and make a nice bevel. It can also be used on the surface of the tape to wear it in a bit
And they mean taking a tech deck and heating up the plastic board and bending the angle of the kick steeper for more pop
Yep
Yeahh only works for plastic boards ….you can tell his age from not knowing 🤣🙏✌️
@@theghostface5905 who?
I came here to say thus exact thing lol works with plastic tech decks 😆 I did this when I was a kid for sure but only gave mine a slight bend to much and jt looked weird 😅
@@meka21customs yea
Lock nut needs a retry with a proper tool!
For the tape on your grinding ledge trick use painters tape for a more slidey feel (perhaps.)
Thanks for including my hack at 10:04 in the video, lol.
Use shrink tube over wheels for grip
I did that
8:31 I cannot believe my hack made it in! I should have been a bit more specific, it works better with plastic wheels to give them more grip. Thanks fire including mine! I love your content!!!
I've been doing the tape Scotch tape to make an obstacle slide better for years
R.I.P for the fingerboard 9:06
love ur vids
You can also use the rubber things in water bottle caps that keep pressure in as bushings
i love this video - it helped me in so many different ways, thank you!
cheerios as budget wheels is my favorite
Cheerios and resin?
The rubber band water balloon bushings are the only bushing I usually use and if you use a pop it and a hole puncher it makes good bushings and you can do that for Lego tires and a hole puncher they all work
You can flush your deck down the toilet to have no deck
👍
With the water ballon bushings, me and my friend were playing with water balloons and we used the rubber bands for bushings and they work so good.
Are you the one who was in the vid
@@JustNolanYT No it was just a coincidence
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
I also like to use the rubbery material from pop-its and cut it out with a leather hole punch to make bushings. Although there is a little bit more work involved coz then you have to pierce them to make a hole.
I use pieces of bicycle repair patches as bushings and it makes a Tech Deck actually usable!
I also clean my tech deck griptape with a slightly wet toothbrush once a week.
Not too wet... don't wanna ruin the griptape.
I hate it when my griptape is all dirty with dead skin cells.😅
For the heated tail you had to heat it up then bend it by pushing it on a hard object and it gives better pop
Banger video Alex. Keep it up!!
Hey @TheGripsion I really enjoyed the video but I think the person with the "hack" :heat up the board for better pop meant heat up a Teck Deck and bend the tail more up to have a bigger pop
Great video bro, I’ve never really delved into this rabbit hole. But it looks very interesting. I wonder if there’s anyone that’s tried with their feet!?!
No it’s only for fingers (jk)
The king always with the vids!!
the deck heat up trick is for plastic tech decks. Back in my day, we would heat up the tail and nose so we can bend them, let them cool, and now you have higher kicks
People be out here paying more money for a finger board than an actual skateboard like wtf
no one asked for your opinion, Bro. Why can't you be just nice. like wtf
Hell yeah, my wife seen these finger skills and blushed.
Dude, I bet you can't even kickflip
Amazing video love it
I use nail polish on the wheels to get grip
I think they mean putting wax on tech deck wheels for more grip
The method I use to remove grip is… the pinch and pull slowly
The one that told you to use rubbing alcohol at the end of the video. Yuh that's my friend...i was absolutely astonished!
If you use a foam sandpaper block with velcro attaching sandpaperpads you can get a nice perfect clean griptape edge and in nice single fluid strokes around the deck in a downward slight angle motion with even force and you will get the perfect edge.
Love your vids ❤
For keeping tech deck nuts on just put a really small drop of super glue on after putting the nut on
i have a bunch of tech decks and i use the bushing 1 and it works so good
I was the last one who he tried 10:31
love your vid
Can anyone tell me what trucks he has on his main setup
Can someone help me like bruh.. alright so the problem is whenever i put masking tape on my grip tape, the griptape has some of these random lines that the masking tape took..
bro didn’t test my budget wheels jack 😭
Your so lucky to have such good beater boards and expensive trucks, im still using My First wooden board that is 32mm and really bad with not responsive trucks and non bearing wheels🙂 i love your videos! Keep it up❤
get your money up
Bernie’s the tire and do it or you
you should try to master the nolly heelflip in your next vid
9:07 I think he ment heat the tail on a tech deck then bend the tail so the kicks are higher
Yo I finally made it into a video!! Sweet
Congrats
I love the video ot was so good andni will use these hacks for my fingerboards
"griptape is actually pretty easy to get off without using some sort of method....." wtf lol. so how???
Watch the video again
Use tech deck bushings as pivit cups
Same
The heating up your board hack does work because then you can kind of bend the tail for more pop
The guy means that u can bend the tail of a PLASTIC tech deck with fire 🔥
Claim your “here in .2 seconds” ticket
👇🏻
I never thought my fingers would ever get sore
this guy sounds like Aceu from Apex Legends lmao
I use the waterbloon one
The heating of the board was to heat plastic board and bend it for more steep pop
try using a balloon as bushings
Sorry I wasn't clear if u was using plastic board burn it a few min then push it up then let cool down and try
The deck go fare 😅
I’ve been using the rubber band bushings for 2-3 years
I tried gluing the axel, and it actually worked! It was hard to get the nuts on before gluing the axel, so if you can't manage to get your nuts on the axel just use some gorilla glue.
Third one
Do you know a fingerboard under 40$
Ur The best fb youtuber, keep it upp man
like a complaete or a full set up
Yeah
7:30 how did you get screw on trucks on a hot wheels fingerboard
Hey my name is Bradley and I just started youtube you actually inspired me to start a channel
Put in the hot water and put in the cold water then leave for 1 hours
8:09
For a tech deck nuts you take a pair of pliers and squish it the slightest amount, it’s easy to overdo it so be careful. It works but it should be a last resort type thing
Can u please make killua's skateboard in fingerboard version pls
First i am so hail. Me. Such a banger Alex
I think now make a finger board with using paper and glass make the trucks with paper nothing that's out of steel or these materials
Well I’m about to put duct tape on my wheels now. Peace.
💜💙💕
Where can I get the 5 dollar inverted fingerboard trucks
Lol just leave your deck in the sun for 2 hrs grip! 😂
what water balloons did you use?
Try to make a wheel with hot glue stick😂
The best hack is to shred more and git gud.
I love your videos ! it would make my day if you would respond :)
I'm pretty sure they ment alcohol prep pads
Light the nose of the fingerboard to make more pop
Who is an oh fan 👇🏼
Use cardboard as bushings
This is my dads profile,but bet you won’t pin and awesome vids❤😊
Use chapstick as wax
You heat up the kicktail of a plastic board and bend it
Onyx I put that first in the discord
😊
You lnow that car graphic its on trak
Y
Use grip tape on the obstacle to make them not slide
Teak
Break the fingerboard with hammer ok sooooooooooooooooooooooooooooo bye
Yoooooo
👇🏼 gripsion is him
Can you give me a sho7t out
please stop moving around
Pls pin me I love your vids so much
I stil whch you im stepmother 22 2024
100th view
S
Can I have free board
Hi
first
I am
@@Themaus1 idk hard too tell a lot of people are😭
yo i love you bro for some reason i cant join ur discord thru ur link