The Stuart Turner 10H Part 9. Here Endeth The Engine.

Поділитися
Вставка
  • Опубліковано 27 вер 2024
  • In this episode:
    New Channel Stickers.
    @RustyInventions-wz6ir
    @StuartsShed
    Making an acid etched nameplate for the engine.
    Metal prep and powdercoating the engine parts.
    Final assembly.
    Running the fully completed engine on air.
    Enjoy!

КОМЕНТАРІ • 106

  • @chrisarmstrong8198
    @chrisarmstrong8198 2 місяці тому +1

    This is an exhibition-quality version of this engine. Thanks for taking us along with the build.

  • @Rustinox
    @Rustinox 3 місяці тому +2

    A lot of work, but it's really worth it. It's a piece of artwork.

    • @Preso58
      @Preso58  3 місяці тому +1

      Thanks Michel. Making it look nice is both a blessing and a curse. It means I am very reluctant to actually run it or make it do any work. I have two steam locomotives that just sit in a glass cabinet because I don't want them to get all oily and sooty.
      Regards,
      Mark

  • @MattysWorkshop
    @MattysWorkshop 3 місяці тому +1

    Gday Preso, I’m always amazed be the finishing processes you use, the name plate etching is something I’ve never seen done before and the finish plate is absolutely amazing, the choice of colours in my eyes is spot on and really suits the engine nicely and I didn’t know that cast iron could be powder coated, love your work mate, cheers

    • @Preso58
      @Preso58  3 місяці тому +1

      Thanks Matty. I hadn't done an etched brass plate for a while and I had to re-learn the whole process. It's a great way of replicating fine detail though. You can powdercoat any metal, and some non metal parts as long as they can withstand the 200C heat from the oven.
      Regards,
      Mark

  • @RobertBrown-lf8yq
    @RobertBrown-lf8yq 3 місяці тому

    Beautifully machined, assembled, fitted, and finished Mark…
    👏👏👏👏👏
    Your patience ( and determination) is inspiring.
    Regards
    Robert
    😊

    • @Preso58
      @Preso58  2 місяці тому +1

      Thanks for that. I know some makers like to leave their models in their "naked" state, I think the addition of some paint or (powdercoat) makes for a more attractive model.
      Regards,
      Mark

  • @NottinghamshireNick
    @NottinghamshireNick 3 місяці тому +5

    What a testament to your skill set Mark - not only the machining but the exemplary finishing nicely shows off the range of skills you have developed. Always a pleasure to watch and such a source of learning, hints & tips and inspiration. Looking forward to your next project. Thanks as always, Nick

    • @Preso58
      @Preso58  3 місяці тому +1

      Thanks Nick. I tend to get hung up on the finishing processes and I know there are a lot of model engineers who don't paint their engines, preferring the bare brass and cast iron. I do like that aesthetic but I have the powdercoating kit so that is what I tend to use.
      Regards,
      Mark

  • @StuartsShed
    @StuartsShed 3 місяці тому

    Absolutely delightful. The finished engine is a beauty. I never considered powder coating at home before - the finish is excellent.
    The photolith process took me back to my days working as a process engineer in a semiconductor fab - your attention to detail really paid off there. The name and nameplate are excellent finishing touches.
    Aaaaaaaaaaaand…….THANK YOU! Really appreciate the channel mention. Greatly appreciated!

    • @Preso58
      @Preso58  3 місяці тому

      Thanks. I am a very big fan of powdercoating. It is so durable and there are so many choices with colour but also the textures. I have some that mimic chrome and anodised aluminium. I just finished up on the powdercoat on the little Stuart water pump today. I will try to post some pictures of it shortly.
      Regards,
      Mark

  • @CreaseysWorkshop
    @CreaseysWorkshop 3 місяці тому +2

    Beautiful work Mark.

    • @Preso58
      @Preso58  3 місяці тому

      Thanks John. Gotta get it running on steam though.
      Regards,
      Mark

  • @outsidescrewball
    @outsidescrewball 3 місяці тому +2

    Enjoyed…great build/finish/video production

  • @TheAyrCaveShop
    @TheAyrCaveShop 3 місяці тому

    Outstanding!! Mark, what a beautiful outcome.. museum quality 👍
    Thanks also for showing the full etching process for brass plate, that’s something I’ve been interested in..
    Great series!
    Cheers….

    • @Preso58
      @Preso58  2 місяці тому

      Thanks Dean. There are easier ways of masking brass. "Press'n Peel Blue" is a product that cuts out a lot of the preparation steps but I had a lot of issues getting it to work reliably. It turns out that cheap recycled laser printer cartridges don't work well with that product. It's also expensive but when you can get it to work it halves the time for prepping a plate for etching.
      Regards,
      Mark

  • @joewhitney4097
    @joewhitney4097 3 місяці тому

    Great series of videos with you work on the pump. Looks fantastic, your attention to detail is amazing.
    Thanks for sharing.

  • @modellingmark
    @modellingmark 3 місяці тому

    She runs as sweet as a nut! Now we've got a boiler build and a loco build to look forward to. I think all my birthdays have come at once!!

  • @MyMiniHomeWorkshop
    @MyMiniHomeWorkshop 3 місяці тому +2

    Beautiful piece of work, it's still on my todo list to make something along the lines of that, but in cast Aluminium, but I have just spent 10 weeks building a Tool & Cutter grinder using my own castings and ideas and I think I've had enough of that just for the time being, again, well done. 👍 PS, I really should go and get some stickers made and send you one so you can add Thailand to your map.

    • @Preso58
      @Preso58  3 місяці тому +1

      I did build a Quorn tool and cutter grinder but almost as soon as I completed it I purchased a generic D-bit grinder. The Quorn was an interesting build but it had some serious drawbacks to do with being able to set the angles accurately. I tend to think it was designed to be a bit too universal and sometimes a simpler setup would be better. Designing your own is probably a better way to go. Go ahead and get your stickers made. I think it is a good way of building the UA-cam community. I'd be happy to do an exchange.
      Regards,
      Mark

    • @MyMiniHomeWorkshop
      @MyMiniHomeWorkshop 3 місяці тому

      @@Preso58 I've decided I'll head into town next week and get some stickers made. The only sticker I have on my wall at the moment is a Rustinox sticker, I must send him one as well.

  • @Jimbo-t2h
    @Jimbo-t2h Місяць тому

    Nice work Mark. Fabulous result.

  • @andrewnormansell1518
    @andrewnormansell1518 3 місяці тому +1

    Absolutely wonderful! Beautifully finished and perfectly engineered. I have looked forward to every episode of this build. Thank you.

    • @Preso58
      @Preso58  3 місяці тому

      Glad you enjoyed it!
      Regards,
      Mark

  • @heinvosloo45
    @heinvosloo45 3 місяці тому

    Beautiful steam engine Mark! Congratulations!

  • @mrc1539
    @mrc1539 3 місяці тому +4

    Beautiful little engine , something to be really proud of. You did an awesome job on it .

    • @Preso58
      @Preso58  3 місяці тому

      Thanks for that. It's a nice engine but I prefer working on something a bit larger now.
      Regards,
      Mark

  • @erniecamhan
    @erniecamhan 3 місяці тому

    Hi Mark, lovely engine....interesting colour scheme 😉🏴󠁧󠁢󠁳󠁣󠁴󠁿

    • @Preso58
      @Preso58  3 місяці тому

      I like it and it's almost the same colour as my Bridgeport mill. Sometimes less is more. 😁

  • @billawad154
    @billawad154 3 місяці тому +1

    Hi Mark,
    I wanted to take a moment to commend you on the outstanding engine build. Your craftsmanship and attention to detail are truly exceptional. The performance of the engine is impressive, and the finish you achieved is fantastic. It’s clear that you put a lot of skill and dedication into this project, and the results speak for themselves.
    Great job!

    • @Preso58
      @Preso58  3 місяці тому

      Thanks. It is always nice to pick up a project that once belonged to someone else. My Uncle was a prolific collector of not just model engines but also gemstones, old sewing machines, lace making bobbins and small offcuts of very rare wood. Some would say he was a hoarder but I thought it was important to finish the engine in a way that he would be happy with.
      Regards,
      Mark

  • @howder1951
    @howder1951 3 місяці тому +1

    Beautiful finished product, a truly great demonstration of persistence and patience. Well done Preso, cheers!

  • @andywithers592
    @andywithers592 3 місяці тому

    Love watching your work. Magnificent as always.

  • @lucpet95
    @lucpet95 3 місяці тому +1

    Worked as a screen printer (and in a dark room every day) for many years using very similar systems. Your double layer of the negative is causing your issues I'd say.
    Light is refracting and reflecting because the black in each image is only on one side, leaving a clear thickness of plastic allowing light to bleed. You could try printing one in pos and one flipped to get the carbon on the same side when sandwiched together or just use one.

    • @Preso58
      @Preso58  3 місяці тому

      I did eventually purchase a genuine toner cartridge for my Brother mono laser printer. The aftermarket recycled cartridge was leaving bare streaks in the printed film and I had seen that doubling up the printed images would help to reduce the likelihood of getting UV bleeding through. Next time I will try just one film thickness to see how that goes.
      Regards,
      Mark

  • @Watchyn_Yarwood
    @Watchyn_Yarwood 3 місяці тому

    I am very impressed with the result. I especially like the plaque you made!

    • @Preso58
      @Preso58  3 місяці тому

      Thanks. I like making those photo etched nameplates but man, there are so many steps and so many opportunities for it to go wrong. If only I owned one of those fancy fiber lasers!
      Regards,
      Mark

    • @Watchyn_Yarwood
      @Watchyn_Yarwood 3 місяці тому

      @@Preso58 😆 Like maybe a CO² or a Diode? Still you always come through with an awesome result! Thanks for taking us along.

  • @paulcohen1555
    @paulcohen1555 3 місяці тому

    The flywheel balance is "Good enough for Australia" 😅

  • @dandavidson9543
    @dandavidson9543 3 місяці тому +2

    Great Job Mark! I watch all of your videos, you do Great work!

    • @Preso58
      @Preso58  3 місяці тому

      Glad you like them!
      Regards,
      Mark

  • @modelengineeringadventures
    @modelengineeringadventures 3 місяці тому

    Lovely looking engine

  • @RogerSchoeni
    @RogerSchoeni 3 місяці тому +1

    Another great engine build. I like the colors. A while ago I made some brass coins with etched faces and bypassed the fiddling with uv foil and such by just spray painting it and then use the laser to remove the to be etched area. Came out great, can send you pics if interested

    • @Preso58
      @Preso58  3 місяці тому

      Thanks. I have used that method and in fact I did try it for the nameplate but the resolution wasn't good enough for the finer details. I also tried etching through the Kapton tape and that worked too, but again, for very small details it leads to undercutting.
      Regards,
      Mark

  • @camojoe2
    @camojoe2 3 місяці тому +1

    Great series Mark.
    The finishes you chose are spot-on.
    Two problems:
    1: the project is done
    2: you need to put out a vid, every day. 😂
    Seriously, you have a great channel, with a tasty mix of information and execution.
    One of my favorite channels, regardless of content.
    Regards,
    Duck

    • @Preso58
      @Preso58  3 місяці тому

      Thanks for the positive feedback. I may still do the Rob Roy loco. But the next project will be a refreshing change.
      Regards,
      Mark

  • @alanremington8500
    @alanremington8500 3 місяці тому

    Beautifully done !

  • @jsteifel
    @jsteifel 3 місяці тому

    looks great. I didn't see what bothered you on the fly wheel. So it's quite close not to show up on video. Great build. Thank you.

    • @Preso58
      @Preso58  3 місяці тому

      It's close but not perfect. You need to see it with a reference edge to see the runout. I am confident I can correct it though.
      Regards,
      Mark

  • @WayneCook306
    @WayneCook306 3 місяці тому +2

    Hi Mark,
    Great job well done, it has been a great build from start to finish thank you, 👍👍👍👍👍👍👍

  • @TinkerInTheShop
    @TinkerInTheShop 3 місяці тому

    Fantastic. I like the colour. Well done. I'm planning a 3inch OD coal fired boiler as a scratch made portable engine so I look forward to seeing your boiler when you get to it.

    • @Preso58
      @Preso58  3 місяці тому +1

      I have to find a reliable supplier of copper tube and sheet. It used to be readily available here but there is only one or two model engineering suppliers here in Australia now. And it costs a fortune!
      Regards,
      Mark

    • @TinkerInTheShop
      @TinkerInTheShop 3 місяці тому

      @@Preso58 Thankfully easier here in the UK. Plus I was given a few meters of 3inch copper pipe thats begging to be turning into a boiler or two..!

  • @franksmodels29
    @franksmodels29 3 місяці тому +2

    Great vid first class build 👍🏻👍🏻👍🏻

  • @Blackcountrysteam
    @Blackcountrysteam 3 місяці тому

    Nice job Mark

  • @geraldguyette470
    @geraldguyette470 3 місяці тому +1

    Mark , great job on the powder coat and a smooth runner .I use this stuff called O' Keeffe's working hands for dry cracked hands , it might help you out . Gotta take care of those hands bro ,latter

    • @Preso58
      @Preso58  3 місяці тому +1

      Yes, my hands are a disgrace in winter. My wife has commented how my hands miraculously transform when I am on holidays. Within a week or two they are smooth and blemish free. I need to moisturise more often.😁
      Regards,
      Mark

  • @generessler6282
    @generessler6282 3 місяці тому

    Bravo!

  • @jamesjinks8080
    @jamesjinks8080 3 місяці тому

    Mark, well done! 😎
    I was hoping to see a long term follow up video on most of your projects like the new mill or the sand muller...
    Jim

    • @Preso58
      @Preso58  2 місяці тому

      I have a project coming up which will involve some sand casting and I can do a follow up of the muller then. It has proven to be a reliable machine and although I did have to make some changes to the belt tensioning and the final pulley drive, it now works extremely well. It sure beats having to use one's hands and fingers to break up lumps in the greensand.
      Regards,
      Mark

    • @jamesjinks8080
      @jamesjinks8080 2 місяці тому

      @@Preso58 I'll be glad to see it! We're into the high-heat here in Central Texas, and I've been watching what I consider to be some of your "classic" episodes to escape the mid-day sun.
      Jim

  • @andrewdolinskiatcarpathian
    @andrewdolinskiatcarpathian 3 місяці тому

    As always such exemplary work Mark. A most enjoyable and educational build from finish to glorious end. Well done. 👏👏👍😀

  • @bin_chicken80
    @bin_chicken80 3 місяці тому

    Thanks Mark. Nice tip on SM Components. Never heard of them. I had a quick look and they have some interesting stuff. Bookmarked!
    Regarding your power coating masking, I wonder if you could use latex to mask some of the more intricate parts like on the flywheel. Not sure if that would work. Maybe it would depend on whether it's conductive? 🤔
    The engine looks great!

    • @Preso58
      @Preso58  3 місяці тому +1

      Parts don't need to be electrically conductive for powdercoat to stick. If it is a masking material, anything will do if it will adhere to the metal and withstand 200C. I have used aluminium foil crushed into cavities and Blu Tac but I haven't tried liquid latex. I am thinking that something like Liquid Paper might be worth a try.
      Regards,
      Mark

  • @thehobbymachinistnz
    @thehobbymachinistnz 3 місяці тому +2

    You have done a really good job on the steam engine Mark.
    12:18 "It's the middle of winter here so the daytime temperature is only about 22". It is around 14 degrees here in the daytime at the moment. Our last trip to Brisbane was in June just before covid hit. It was like we were in a NZ summer.

    • @Preso58
      @Preso58  3 місяці тому

      Thanks Jon. We are heading for NZ in August. We are starting in Wellington but then flying to Queenstown. We have been checking the temperatures, especially in Wanaka. We were hoping to drive to Mt. Cook but we are unsure if a rental car will make it if there is ice and snow. We have puffer jackets and thermal underwear!
      Regards,
      Mark

  • @rufustoad1
    @rufustoad1 3 місяці тому

    Great job. I assume you put that drive wheel in the lathe because it looks like it runs quite true. Have you ever done a video on converting that stove for powder coating?

    • @Preso58
      @Preso58  3 місяці тому

      I haven't yet trued up the flywheel. It is very close but not perfect. I was quite annoyed really. I reamed the bore of the flywheel and initially it fitted snugly but during the rest of the build it was taken on and off the crankshaft many times and that was enough to make the fit slightly loose. Fitting the key tends to move the axis of the flywheel relative to the crankshaft and that 20 micron clearance shows up as a slight wobble. I didn't make a video on the powdercoat oven but in reality, you could just use a regular domestic oven or even a small toaster oven. Although I fitted a PWM temperature controller you don't need that level of control. I only fitted the controller because I found the oven in a skip and the original temperature thermostat was missing.
      Regards,
      Mark

  • @diggerdelaney
    @diggerdelaney 3 місяці тому

    Have enjoyed all of your builds, unlike you, I came from a woodworking hobby of building wooden models as can be seen in my u tube, to now building a Farm Boy stationary engine and also the Rob Roy loco. So will look forward to seeing that build when you get back on it.

    • @Preso58
      @Preso58  3 місяці тому +1

      Thanks. I had a quick look at your UA-cam channel. I am not sure if you have seen Richard Blizzard's books on wooden toys (I suspect you have) but I built a number of his models including the Landrover, the Scania truck and the Rolls Royce Silver Ghost. It's a great way of using up scraps of nice wood and replicating sheet metal parts is always a pleasant challenge.
      Regards,
      Mark

    • @diggerdelaney
      @diggerdelaney 3 місяці тому

      @@Preso58 Yes I do have some of his books

  • @peterrehnstrom2867
    @peterrehnstrom2867 3 місяці тому

    Great achievement as usual!
    Question: would a peelable masking compound be an option to tape? Similar to the stuff used to mask pcb’s when soldering, or same as used for spray welding?

    • @Preso58
      @Preso58  3 місяці тому +1

      I am not sure if it would work, but I haven't tried it either. The main requirement is that it can withstand an oven temperature of 200C.
      Regards,
      Mark

    • @peterrehnstrom2867
      @peterrehnstrom2867 3 місяці тому

      Would perhaps be possible for you to test if you happens to come by a suitable compound?

  • @gordonburns8731
    @gordonburns8731 3 місяці тому

    Lovely, but to run on compressed air is not the same as running on steam.

    • @Preso58
      @Preso58  3 місяці тому

      That is true. It also needs to run under a load to sound right.
      Regards,
      Mark

  • @rcaddictions7385
    @rcaddictions7385 Місяць тому

    Hey Mark,
    I'm just getting satarted with model engine building and found myself with two older Coles C611 casting kits. I'm in the process of starting to machine some of the barstock parts and was wondering if it's better to make a two seal piston, instead of the single seal piston of the original design. I see most of the modern kits use a two seal piston. This will require me to make the piston a bit longer than the original, but it looks like there is plenty of room in the cylinder to accommodate this. What is your thoughts?? Thanks.

    • @Preso58
      @Preso58  Місяць тому +1

      If you are only ever going to run the engine on air, one seal is fine. In fact, in the build notes it only specifies a shallow groove for retaining oil. I have an engine that has done a lot of work running on steam and it only had one groove filled with packing and it seemed to retain the steam quite well.
      Regards,
      Mark

    • @rcaddictions7385
      @rcaddictions7385 Місяць тому

      Thanks Mark!
      I do plan on running on steam at some point, but I'll go ahead and build it acording to the plans.

  • @jdmccorful
    @jdmccorful 3 місяці тому +2

    Beautiful! Really enjoyed, thanks

  • @kennyl4510
    @kennyl4510 3 місяці тому +2

    Hey Mark. Thankyou. I'm progressing in my pursuit of home engineering. Thanks to the content of you tube and others. I'm so greatful for your effort.Cheers mate

  • @jrkorman
    @jrkorman 3 місяці тому +2

    Looks to be running quite well. I find that color a bit different but very pleasing! Good choice.

    • @Preso58
      @Preso58  3 місяці тому +1

      The Plateau Green that I used is almost the exact same colour as my Bridgeport mill. In fact I bought it in case I need to powdercoat any parts for the mill. It's a bit understated for a Victorian era steam engine but as they say, "less is more".
      Regards,
      Mark

  • @russtuff
    @russtuff 3 місяці тому

    A nice conclusion to a great project.

  • @jasonhutchinson8534
    @jasonhutchinson8534 3 місяці тому

    Well done Mark. I always enjoy the birth of a steam engine. I’ve really enjoyed the build videos, great content, nice to see your adaptations to the model.
    Looking forward to watching your next project whatever it will be. Always different and always interesting.
    Thanks. ✔️

  • @Radiotexas
    @Radiotexas 3 місяці тому

    Absolutely beyond beautiful, mate! Love the color! Is there ANYTHING you can't do?!?!?! Cheers!

    • @Preso58
      @Preso58  3 місяці тому

      Yes, I can't dance and I can't sing. 😁
      Regards,
      Mark

  • @wallbawden5511
    @wallbawden5511 3 місяці тому

    well Mark nice process from the etching through to the powder coat and final running
    but i have lost faith in you now and am not enjoying your video's anymore since you did the draw on the DIE HOLDER i am sorry but have to leave now Cheers all best for your future projects 😥😢

  • @nigeleaton5715
    @nigeleaton5715 2 місяці тому

    Beautiful work. Thanks for sharing it.

  • @thercbarn5001
    @thercbarn5001 3 місяці тому +1

    Lovely engine! The finish is spot on. Mike

  • @seabreezecoffeeroasters7994
    @seabreezecoffeeroasters7994 3 місяці тому +1

    Another upvote for SM Components I have made a few purchases off his Evilbay store and prompt and some good sometimes slightly offbeat parts 👍👍

    • @Preso58
      @Preso58  3 місяці тому

      Absolutely! I noticed that he is selling Nixie clock kits which is always a nice thing. Also, we should be supporting Aussie suppliers.
      Regards,
      Mark

    • @seabreezecoffeeroasters7994
      @seabreezecoffeeroasters7994 3 місяці тому

      @@Preso58 Take a look at the flexible LED strips and then think of some uses/projects )

  • @patrickshaw7983
    @patrickshaw7983 3 місяці тому

    The finished article looks really great, your attention to detail is fantastic.

  • @wmc7870
    @wmc7870 3 місяці тому

    Let's run this "on air" boom boom😊. Nice job Preso!

  • @brucemansfield2501
    @brucemansfield2501 3 місяці тому

    Beautiful work as always, Mark.

  • @theq291
    @theq291 3 місяці тому

    Nice work.... curious to know where you obtained the gasket material.

    • @Preso58
      @Preso58  3 місяці тому +1

      I was given a pack of that red fibre material. It was a sample pack with about 10 different thicknesses. My wife's uncle used to be a sales rep for Sellars Atkins in Adelaide. They sold just about everything to do with engineering and manufacturing and he would keep boxes of samples and redundant stock for me. Sadly, he was made redundant and overnight my boxes of freebies dried up. Cry!
      Regards,
      Mark

  • @Optiksnut
    @Optiksnut 3 місяці тому

    Love what you can do! The Stuart Turner turned up a treat! (Please excuse the pun.) I used to build large telescopes, now I build tiny model ones and can share in your frustration with the smaller "fittings". I go down to 14BA with some of the ones do.

    • @Preso58
      @Preso58  3 місяці тому

      Wow! The smallest I have used is 10BA and that was when I was younger. 14BA sounds like watchmaking! Well done.
      Regards,
      Mark

  • @davidbean6383
    @davidbean6383 3 місяці тому

    Hi Mark
    Many thanks for a great project. I learnt so much!
    Mid summer here in the UK and it's not much warmer than where you are!

    • @Preso58
      @Preso58  3 місяці тому

      Yes, we complain about mornings when it's 12C but in Minnesota or Montreal that would be balmy summer's day.
      Regards,
      Mark

  • @rogertaylor1589
    @rogertaylor1589 3 місяці тому

    You are the master of metal finishing on top of your machining skills. The etched plate is the finishing touch. Thanks for this episodes lesson.

    • @Preso58
      @Preso58  2 місяці тому

      Thanks. Those etched plates are a bit of a mission but the end result is always pleasing.
      Regards,
      Mark

  • @joell439
    @joell439 3 місяці тому

    👍❤👍

  • @thebiggerbyte5991
    @thebiggerbyte5991 3 місяці тому

    Excellent!