XFly Model Twin 40mm F-22 Raptor
Вставка
- Опубліковано 17 бер 2024
- Features:
4 operable channels (Aileron, Elevator, Throttle, Steering)
Streamlined and true-to-scale design
Efficient twin power system setup delivering an abundance of thrust for fast climbs, rolls, loops
Low wing load and full flying stabs design for excellent high alpha capability
Perfectly fitted landing gear design for smooth takeoff and landing
Extended flight time of 3-8 mins when using recommended 4S 1300-2600mAh LiPo battery
All components can be assembled quickly without glue needed
Molded-in finger grips for easy hand launch
Robust EPO construction
Wingspan 702mm (27.6 in)
Length 955mm (37.6 in)
Wing Load 89g/dm2
Wing Area 10.6dm2
Flying Weight Approx 950g (2.1 lb)
CG (Center of Gravity) 80mm from the leading edge
Drive System Two 1413-KV5000 inrunner brushless motors
EDF Diameter Two 40mm (12-blade impeller) Galaxy X-4
Landing Gears Fixed main landing gears, steerable nose gear
Servo Five 9g
ESC Two 20A
Approx Flight Time Up to 8 mins
Assembly Time Approx 10 mins
Recommended Battery (Not Included) 14.8V 1300mAh~2600mAh Lipo
www.bananahobby.com/4-ch-xfly-model-f-22-raptor-twin-40mm-rc-edf-jet-pnp.html - Розваги
Bird looks awesome!
It definitely does for a little jet. I like how they put the same quality on the smaller planes as they do on the big boys. Wish it had a bit more thrust. Scale loops are a no go. But rolls and high alphas for dayyyyyssssssss Thanks for watching 🇺🇲👊
wow she landed fast!
John nice flying, looks like a fun flyer, zoom zoom zoom Jeff in LA USA
Zoom zoom Jeff Thabks for watching as always 👊🇺🇲👍
Noonz! Nice plane, nice day, nice flight- what more could you want? That looks like one of the fields in the Aerofly sim, too!
Couldn't agree more! THANKS STEVE! 🇺🇲👊
Definitely flies great! What glue did you use not the tires gorilla 🦍 glue or Foam Tac! 😆
"Rubber cement" get it? Get it? I'll be hear all night 🤣🤣🤣🤣🤣
Ya got the tire glue on??
NO DOUBT! 🤣🤣🤣🇺🇲👊
@@NoonzAirborneRC you in Arizona??.....nice weather.....we had snow ❄️ flurries this morning in North West Indiana...
do you know the top speed of this because I am thinking about buying this
No, not off hand. I'd say in the ballpark of 70 to 80ish I'd say.
@@NoonzAirborneRC Thanks for the quick response. dang that's fast, would you reccomened this for a beginer
@CharlesStefero yes and no. Yes bc its easy to fly and no because it can be hard to see specially for a beginner with nerves. An amazing first edf I would recommend is the flyfan k8 (you can see it on my ch) cheap, cheap lipos and a stable flyer!!
@@NoonzAirborneRC ok, will definitely look into that. Also I subscribed
also if i were to buy this on amazon, does it come with a remote