I think the idea is using the transistor to turn the battery from dc to ac, but I wasn't focusing in the class when the teacher talked about them😅, I think I will have to wait until the college professor talks about it again. If you did under how it's working can you explain 🙂.
The creator should tell the LED must be a RGB, otherwise it nerver flash. if the RGB LED is flashing itself why need the transistor? just connect to the source and 1k resistor.
Nice setup, just make sure everyone knows that a BMS is REQUIRED for LiIon batteries, to prevent a risk of fire or explosion when those batteries are either charged or discharged beyond their safety threshold.
Exactly. It's like it's playing a trick on the transistor and it can't make up its mind because of the fluctuating voltage that lets the transistor pass current.
How should I make a circuit to operate for a long time in the form of 12 cat sliding lights with a 9 volt battery? What type of LED should it be? 15 days - 20 days to run (10 hours per day)
@@hkhobbypakistan6917 in this circuit you can connect 8 to 10 leds in parallel. Make sure you are connecting the LEDs with the red LED. It will work. You can also use 1k resistor for series (not mandatory) branch.
Dont need these circuit. Just buy a RGB led then connect it with a normal led. It will blink with RGB led. (3.7v) I try his method..... not so bright (2nd led)....
Early Upload!!
For More Information Visit: circuitbest.com
Oke@Ramchandra Mestri yang 2 jam eji
For beginners please provide description on its working. Thank you for your contribution
I think the idea is using the transistor to turn the battery from dc to ac, but I wasn't focusing in the class when the teacher talked about them😅, I think I will have to wait until the college professor talks about it again.
If you did under how it's working can you explain 🙂.
The creator should tell the LED must be a RGB, otherwise it nerver flash. if the RGB LED is flashing itself why need the transistor? just connect to the source and 1k resistor.
Great video! Question:
How would you create a variable strength and variable time difference of the powering and brightness of each LED?
Sorry, there is no similarity between the thumbnail and the video. Please don't misguide only for watch time.
I really like this channel, you are a genius I congratulate you for your good work 😊😍😍
would it be possible to replace the red LED and resistor with a relay, if you wanted to make a higher powered lamp flicker?
@@GothGuy885 yes it can be possible
Many thanks. I have subscribed.
Make video with explanation of the function of the circuit diagrams. i.e. how transistor work ?.
Can i do this with a big light bulb?
It is work?
Too good!
Can i make this without rgb led?
Please reply sir.
I have made other video without rgb led
@@Creativecreator please if you can , share me that video link
Because I didn't find that video.
This happens because,the consumption of current is variable rgb led,so red led change his brightness
Very beautiful video
Nice setup, just make sure everyone knows that a BMS is REQUIRED for LiIon batteries, to prevent a risk of fire or explosion when those batteries are either charged or discharged beyond their safety threshold.
A BMS??
Battery management system BMS
You build circuits??
Bro the red light blinks because tricolour_light need more voltage . And it decrease voltage of Red light
Exactly. It's like it's playing a trick on the transistor and it can't make up its mind because of the fluctuating voltage that lets the transistor pass current.
Good sir i am pakistan hasnian shah
Nice
Thanks
can we use another led
Yes ,any
The circuit itself can''t flash/blink. blinking is done by clamps. It is like a fake video.
Can i make police strob light like this way?
Nice ..👍👍
Valeu!
Grato!
Excelente projeto!
Boa noite!
Ao SENHOR pertence a salvação! Jonas 2.9
Can you use alternative transistors ?
Can you complete this using only 1k resistors?
How should I make a circuit to operate for a long time in the form of 12 cat sliding lights with a 9 volt battery? What type of LED should it be? 15 days - 20 days to run (10 hours per day)
Simply connect a rgb led parallel to any led to make it blink like this
Nice project. If I want to use 12voltage battery, what changes needed to be done in the circuit?
I have made a dedicated video on that
*_BRAVO, SUPER._*
Thanks
Does it wrk on 9v
Waooo
Thanks!! 😀😀
@@Creativecreator nice project sir...
@@Creativecreator sir next time plz make video to same time 8 to 10 LED falshing circuit making plz sir...
@@hkhobbypakistan6917 in this circuit you can connect 8 to 10 leds in parallel.
Make sure you are connecting the LEDs with the red LED. It will work.
You can also use 1k resistor for series (not mandatory) branch.
@@Creativecreator thankyo sir... I'am trying..
Is it possible to input a current of 12v to this?
Excelente!!!!
Nice project
Thank you so much!!
Good
Bro can I use it for a single led with same timing
Yes
What to do only for 1 led
Sorry your video not working with two still leds
I'm building the same exact circuit, but not getting the same result. Not flashing. I'm not understanding this. Am I doing something wrong?
I ain't got time or know how for Dat!!!!
NICE
Thank you so much!!
Please subscribe.
Dont need these circuit. Just buy a RGB led then connect it with a normal led. It will blink with RGB led. (3.7v) I try his method..... not so bright (2nd led)....
Bhai rgb led koinsi use kare 2 colour/3 colour
Please make a blinking LED for Drone with chargeable 5V battery light weight
Check my latest video
How long the battery will last?
👍👍👍👍
Hi. Simulating with Crocodile clip, the white diode, the transistor and a switch are burned. That could be happening? Regards
Can i use 9V supply
Can use 10K in place of 4.7K
Plz make it on zero PCB board
can i use 4 k resistor
Does the base really need an extra led?
Wow, using no capacitor
Mantap...👍👍😄
It is a bistable oscillator
Why the videos never look like the thumnail? Do a single led please no multicolor led.
Can anyone tell me how can I remove these items from my LED panel to get a simple light panel?
Muốn làm nguồn 5V
can this work in single 1.5 volt battery or two 1.5 volts battery
Yes bro
Bạn có thể chỉ cho tôi 100 led với nguồn 3.7v không ?
Can you use a pot to control the speed?
Today I am going to publish a video on adjustable flasher
a better flasher circuit can be made by op omp that is adjustable for speed of flashing. If u want to know how just comment
Wanna know!
Can I pay you a consultation fee on a project??
I will connect 10.000 powerbank. Fake Alarm light for car How many hours or days will it last?
does it work with 3V?
Yes 😉
Does it work 12v
i cant get them to flash... no idea what im doing wrong...
Olá! Troque a polaridade da fonte e dos Leds. No diagrama está correto.
Bhai 4.7k ki jagah koinsa use kare
Hello sir - Am I gone color blind or are you soldering a 470 ohm resistor instead of a 4.7 kohms??
No buddy it's 4.7k
Rgb led no need transistor for blinken
Where is the oscillator to this?
100 led par ye sircute kaam karega kya
It works but definitely not flashier at all
so, why use all those components?
110V
What software is used to edit videos?
Lol you’re creating a flasher using an led that already has flasher function built in. Stop fooling people
5V
Hjj
👍👍👍👍👏👏👏👏
Its fake because you just show battery wires why you don't show the battery
Fake hai. Led blinking hota hi nahi
Do you need the rgb led
This is not working
no .
This fake video because one of the two led light is blinking bulb
Bom.e.fase.e10
I wonder why yt removed the dislike button
Iithiun
no man bro dont post fakes my man
This is waste circuit does not flash at all
Fake h
Fake
Faku video
Nice
Thank You So mUch!!
Can we use any other led instead of rgb
Yes, but there has to be 2 leds