pro tip guys, if you're having issues with volume faders for channel 1 or 2; grab a qtip and spray it with rubbing alcohol and just stick it in there to clean the faders. Chances are it's micro particles like dust or pet hair etc. Didn't have to do a complete removal and seems like an easier fix for this particular issue. Super helpful video though, thank you!
I have the same problem with my channel 2 volume fader. So all I have to do is get a qtip and rubbing alcohol only? And then stick the qtip in the fader?
You have saved my board! Thank you again my friend! This was very in-depth and I just needed to find out how to take the fader ends off! Will always trust my fellow slavs to find a way to fix our tech up!
What I like most about your video is, I don't see anything on here to scare me. I have a 'Line in' channel on my mixer that needs repairing through normal wear and tear (It's a VERY old DJ Mixer bought at the same time as my SL1200 mk3 decks) The sound is coming out of the channel no matter where the slider control is set so I assume it is a far bigger problem than you had, but at very worst I know I can take it apart and have a jolly good go at repairing it. Thanks for uploading this.
Man, thank you so much, you just help me saving 20$ for the new master volume. MV on deck 2 is work propertly again, but i have small problem that after cleaning MV on deck 2, it not smooth like MV on deck 1, i think im rub to hard lol. Keep it up
Had the same problem on R/H deck fader, just oxidation on the contacts though, just sprayed with a little contact cleaner through a long straw & worked the fader bit. Good as new, thankfully no stripping down process to go through.
@@MTS_IT 1st time it's happened since I got it over 2 years ago. No intention of selling got a gig to do at the end of month. Like I said No spillage, just Oxidation. In Yorkshire we also have a saying "If it isn't broken, don't fix it" lol Interesting video though.
managed to clean one and re solder back on no worries, second fader however is not responding and filter knob is now working as the fader control on reckordbox.. any tips or help is appreciated! great video regardless
thank you for this video my 2nd channel fader broke 3week ago and i'm waiting on the faders to come in my mail today, however i don't know if i can fix it, my low pass/highpass filter right now controlls the 2nd channel fader and if i press in the 2nd fader it works. so i hope the replacement fader fixes it. havent opened the controller jet. will update on another comment when i did. have a nice day
Managed to fix my tempo fader on my ddj 200 thanks to this vid. It does not stop in the middle anymore and is not level but works for now. Can't find a replacement fader and not sure if I could use one from another model 😁👍
Hi i have a problem with this model because my filter trim works as a left Chanel fader, but the fader won’t work, so I have to control the volume withe the filter stem, is there anything I can do? I tried to uninstall but it doesn’t work, I chceck on 2 laptops
Hello my ddj 400 is dead does not react at all after i try conect on ipad with a usb hub i think there is a short hapen with more voltage from the qucik charger and now dont turn on anymore have yiu got any idea what shpuld i do? Thank you
@@cameronduncan395 either that or wick. In theory you can only use soldering iron and pull the fader but chances of fucking something up increase exponentially
Hi, there are two options: 1. Search ebay for DDJ-RB replacement fader (1=10$) or 2. you can actually buy: www.ebay.com/itm/5Pcs-Channel-Fader-for-Pioneer-DJM300-400-500-600-700-800-2000-DCV1010-10k/184248482315 (same fader bit it's cheaper because it's for old mixer - but same (literally))
i have a ddj sx2 that is shooting volume up and down i replaced volume faders and trims and the equipment is still behaving the same, can master volume result to that if is faulty?
@@MTS_IT can you do a little research for me please coz have used alot of money to bring back that equipment to normal state but until now i have issues with it, and what about Front PCB Assy if is faulty can it affect audio output?
It's not smart to use Isopropyl alcohol on plastic, it eats into it which is why the paint was "rubbing off". Use a damp cloth with dish soap and water instead to clean plastic.
@@MTS_IT ignore him. Thank you for making this video! Really helpful and really detailed. Keep it up! Can you make a video on replacing Denon Prime 4 faders?
pro tip guys, if you're having issues with volume faders for channel 1 or 2; grab a qtip and spray it with rubbing alcohol and just stick it in there to clean the faders. Chances are it's micro particles like dust or pet hair etc. Didn't have to do a complete removal and seems like an easier fix for this particular issue. Super helpful video though, thank you!
Worked for me mate thank you 😊
I have the same problem with my channel 2 volume fader. So all I have to do is get a qtip and rubbing alcohol only? And then stick the qtip in the fader?
worked for me also!! thank you VERY MUCH!
Worked for me too !
You can also put a little wipe with Isopropyl alcohol with a toothpick inside the fader and move it up and down :)
You have saved my board! Thank you again my friend! This was very in-depth and I just needed to find out how to take the fader ends off! Will always trust my fellow slavs to find a way to fix our tech up!
Fader cap removal the exact thing I needed! Thanks for sharing... could have easily destroyed the clip without knowing about the white strip.
Woohoo :)))
Thank you for this video very well made and straight to the point
What I like most about your video is, I don't see anything on here to scare me. I have a 'Line in' channel on my mixer that needs repairing through normal wear and tear (It's a VERY old DJ Mixer bought at the same time as my SL1200 mk3 decks) The sound is coming out of the channel no matter where the slider control is set so I assume it is a far bigger problem than you had, but at very worst I know I can take it apart and have a jolly good go at repairing it. Thanks for uploading this.
:)
Thankyou much tomorrow I will be repairing my rev 1
@@Djpatiski254 good luck :)
Amazingly helpful video
Man, thank you so much, you just help me saving 20$ for the new master volume. MV on deck 2 is work propertly again, but i have small problem that after cleaning MV on deck 2, it not smooth like MV on deck 1, i think im rub to hard lol. Keep it up
Tiến Dũng you can use a bit of oil on a qtip and lube the metal part (casing) of the fader (not the electronics) and that should fix your problem :)
Had the same problem on R/H deck fader, just oxidation on the contacts though, just sprayed with a little contact cleaner through a long straw & worked the fader bit. Good as new, thankfully no stripping down process to go through.
Ahh… that’s a short term solution (about up to 6 months) here in croatia people use that method when they want to sell the mixer :)))) )
@@MTS_IT 1st time it's happened since I got it over 2 years ago. No intention of selling got a gig to do at the end of month. Like I said No spillage, just Oxidation. In Yorkshire we also have a saying "If it isn't broken, don't fix it" lol Interesting video though.
managed to clean one and re solder back on no worries, second fader however is not responding and filter knob is now working as the fader control on reckordbox.. any tips or help is appreciated! great video regardless
HI THANK YOU FOR THE VIDEO! IS THERE A WAY TO CLEAN IT WITHOUT DISASSEMBLING IT?
thank you for this video my 2nd channel fader broke 3week ago and i'm waiting on the faders to come in my mail today, however i don't know if i can fix it, my low pass/highpass filter right now controlls the 2nd channel fader and if i press in the 2nd fader it works. so i hope the replacement fader fixes it. havent opened the controller jet. will update on another comment when i did. have a nice day
it's not extra difficult. I hope it all goes well :D
@@MTS_ITgot it working thank you for the video
Nice job, thanks
thank you
please do a video changing the Play button, of that some controller.
My DDJ400 tempos left slider is responding irregular only going from +4 to +6%, with +3% where suppose to be 0%... Any recommendation?
Zdravim ta zo Slovenska :) Dobre videa maš .
Grindererr Official tnx :)
Ciao i potenziometri dei filtri si muovono molto c'è un modo per sistemarli?
Managed to fix my tempo fader on my ddj 200 thanks to this vid. It does not stop in the middle anymore and is not level but works for now. Can't find a replacement fader and not sure if I could use one from another model 😁👍
awesome :D
Sir how to replace fader volume pioneer ddj 200?
Can you make a video to dissemble the hercules dj jogvision
I have a DDJ -SB3 and am having the same fader issue, is this practically the same process for my board?
Yup :)
hello, can you clean the faders without removing them?
Nope :)
Hi i have a problem with this model because my filter trim works as a left Chanel fader, but the fader won’t work, so I have to control the volume withe the filter stem, is there anything I can do? I tried to uninstall but it doesn’t work, I chceck on 2 laptops
Probably replace pots
@@MTS_IT thanks I’ll try and let you know
What is the part number for the 2 deck motherboards ???
Sir Mera ddj RB controller ka headphones jeck aux not working please reply sir
Hello my ddj 400 is dead does not react at all after i try conect on ipad with a usb hub i think there is a short hapen with more voltage from the qucik charger and now dont turn on anymore have yiu got any idea what shpuld i do? Thank you
Sorry, no - i would need to disassemble it. Try searching for some kind of protection diodes on input.
What is the tool that you use to disconnect the Faders from the motherboard?
soldering iron and vacuum pump (for removing solder)
@@MTS_IT cheers! Do you need both of them.
@@cameronduncan395 either that or wick. In theory you can only use soldering iron and pull the fader but chances of fucking something up increase exponentially
What is the snipper thing used to take the solder off
vacuum pump
Is there avalable replacement for channel crossfader?
@@AbelCabrera-d1z yup? Actually even more models than faders.
@@MTS_IT what crossfader model fits to DDJ RB? is DDJ RB and DDJ SR same crossfader?
@@AbelCabrera-d1z DCV-1023 (find it on ebay)
@@MTS_IT thank you bro..😊😊😊
i send it to the pioneer repair service.. this is too much for me xF
what type of faders (model) where those in case of the need to buy
Hi, there are two options:
1. Search ebay for DDJ-RB replacement fader (1=10$)
or
2. you can actually buy: www.ebay.com/itm/5Pcs-Channel-Fader-for-Pioneer-DJM300-400-500-600-700-800-2000-DCV1010-10k/184248482315 (same fader bit it's cheaper because it's for old mixer - but same (literally))
👍👍👍tks!!
i have a ddj sx2 that is shooting volume up and down i replaced volume faders and trims and the equipment is still behaving the same, can master volume result to that if is faulty?
Yup, however it can also be problem with ground.
@@MTS_IT can you do a little research for me please coz have used alot of money to bring back that equipment to normal state but until now i have issues with it,
and what about Front PCB Assy if is faulty can it affect audio output?
before you clean Master volume how was it behaving?
where can I buy level fader 4 in pieces ?
Aliexpress is the cheapest option
Where can I learn all of this ?
just watch the video It’s pretty straightforward, if you have a question don’t hesitate to ask
@@MTS_IT no i meant learn how to repair dj sets in general?
@@jadhallab uff… google, lots of google :) (at least how i learned most of the things i know)
Can some body please 😩 tell me were I can take my ddj400 to get fixed
I’m doing it right this second it’s cheap about 10 pounds
It's not smart to use Isopropyl alcohol on plastic, it eats into it which is why the paint was "rubbing off". Use a damp cloth with dish soap and water instead to clean plastic.
Can u fix mine
unfortunately i'm in Croatia so you'll need to check somewhere closer :D
it was better to replace it. in my case I do not recommend repairing it
yeah, that's always the best solution :)
@@MTS_IT I would like to see repair of cdj and other high-end controllers and thank you for sharing your knowledge
Why waste our time?
? :(
@@MTS_IT ignore him. Thank you for making this video! Really helpful and really detailed. Keep it up! Can you make a video on replacing Denon Prime 4 faders?
@@Jamesdean16 if one arrives for a repair i'll make a video :D
why are u so lame?