I think you over turned the camera ! Please unplug the camera first, and let's hold the base of camera with one hand solid, and grab the upper part of camera with other hand, and gentally turn manually the upper part of camera until the lens lines up away of micro usb slot. Than plug the camera to be resetted.( please Note Do not force it, make sure you are turning it to right direction ) Good luck
@@sicilianprican please make sure when you turn the upper part, the back of camera lines up to where the micro usb is plugged in, than plug in camera again, and restart the camera, camera will restart and will lined up with original alignment.
@@FlightSim2703 Yeah I tried it all, never responded even when I tried doing what you said just never moved never turned on to scan even when I used the reset button I just put it down as a lost
Did you get a reply from WYZE on this? I'm having same problem. It rotates but LENS stuck, will not tilt. I can hear it try to move but needing to open up and lube. Don't know what type of lube
My camera just has the yellow light in and it doesn’t do anything else
Тоже самоэ
Mine wont even come on
I think you over turned the camera ! Please unplug the camera first, and let's hold the base of camera with one hand solid, and grab the upper part of camera with other hand, and gentally turn manually the upper part of camera until the lens lines up away of micro usb slot. Than plug the camera to be resetted.( please Note Do not force it, make sure you are turning it to right direction ) Good luck
BrianSh thanks for the advice just did the and it worked!!!
Didn't work for me
@@sicilianprican please make sure when you turn the upper part, the back of camera lines up to where the micro usb is plugged in, than plug in camera again, and restart the camera, camera will restart and will lined up with original alignment.
@@FlightSim2703 Yeah I tried it all, never responded even when I tried doing what you said just never moved never turned on to scan even when I used the reset button I just put it down as a lost
@@sicilianprican Sorry , for sure it's defective,
Did you get a reply from WYZE on this? I'm having same problem. It rotates but LENS stuck, will not tilt. I can hear it try to move but needing to open up and lube. Don't know what type of lube
Lol I was about to say my cam doesn’t even have a light. I thought it was some kind of shiny reflective stuff reflecting the light in my garage.
I have the same problem
What if that light doesn’t come on when u plug it in?
Notification no longer works?
My pan cam will not scan the barcode
you scan the one on your phone with the camera not the one on the camera
@@Darkkatt that's the exact issue I'm having now. It won't even read the barcode on my phone
Any luck?
@Wyze, Check tris problems
Cat got your tongue?
I have the same issue
BS wait time