I know the farmers around enterprise AL are in the fields fixing Terraces and washouts spraying and disking getting the land ready for when it’s time to go
8:59 I'm surprised James didn't come back with a smart-ass comment!!😂 Yeah I know what I'm doing, if you leave me alone I'd have it done by now❤!! It's a Ford you going to be replacing more than spark plugs!!
Daniel, Awesome stuff, Granny 😍, Me,2019 Colon, stroke, Brain injury, feet,arm,hand ; 2020 Cancer 4 Stage. GOD is good . Thank you all, Family Farms. (N.G Ind. )
Daniel, I watch your videos each week religiously! I click on the thumbs-up on each one! I have turned on several friends and family to your channel! Every now and then at te end of your videos you mention that you read All the comments and try to answer any questions? I have asked the same question on several videos and haven't seen any comment or answer to my question about super singles flotation tires vs the narrow skinny tires you'll run on most all of your equipment? I know you have a set of both for your Rowgator and understand the purpose of getting through the tall crops laye in the season, but during the field preparation and setting up rows you have much better flotation and traction with super singles and even more so with rubber tracks which I've heard the cost is even more? I thank you for your time spent bringing us these videos, I was working on my uncles farm on the summer months and he only ha 2 daughters and wasn't interested in taking over the farm, this all came down to the late 70's early 80's I wanted to go to NC State University and study Agriculture but mu uncle came down with colon cancer and passed away, My Aunt and Cousins sold off the farm and equipment, leased a lot of the land for income and that was the end of my career farming! You and your Dad really hit home in that respect and for that reason alone I thank you sir! God bless you'll (family and crew)!
Your F250 sounds like a Cam Phazer issue. They are known for that. It's a P0305 code usually.. Also Check your injectors by a scan tool to read the fuel parameters . Good luck with it 👍
One way to find out if it's the coils going bad, is to swap the coil pack from a cylinder that's misfiring with one that isn't, and if the problem follows the coil pack, then you'll need a new one. Enjoyed the video! 😊
I was in your neck of the woods recently and drove around Benton. Very nice little community! Roads are kinda of narrow, hope you have extra mailboxes on hand.
Daniel hope those pipe down tubes endure going across the field, would like to have seen you use some rigid flex tubing…thanks for sharing your videos!
It's great that you guys can start farming in February. I'm in upstate New York....yesterday morning when I got up it was 10 degrees, farmers here probably won't get into some of their fields till May....
Love you're video's enjoyed seeing dad what a work horse he is also enjoyed seeing Mark and James any business or farm's really needs good reliable employees keep up with the great video's enjoy watching from Ohio
Check for codes? Thanks for the video Daniel keep up the great work 👍❤️❤️. Take care of yourself and family and friends and be Blessed ❤️. Hi Granny have a Blessed day ❤️.
Daniel, are your yields better with tillage vs no till? It seems like y’all consistently work everything up. Maybe has to do with your soil types? Just curious
What row spacing are your planters? I can tell they’re not 30 inches. Mann you guys plant way earlier than we do up here in Illinois we’re lucky to get in the field doing tillage March 10 and planting by April 1.
@@TripleRFarms I use to farm corn soybeans cotton and tobacco! I was born and raised on the farm! I stopped farming in 2015. I know all about it. I enjoy watching you guys from here on the NC/SC border we are 20 miles west of North Myrtle Beach SC! Good luck this year!
I can't speak for Triple R, but we only plant about half the corn we once did. And, if possible, we store our corn in bins til the price goes up. Sometimes we sell to livestock producers.
I know the farmers around enterprise AL are in the fields fixing Terraces and washouts spraying and disking getting the land ready for when it’s time to go
8:59 I'm surprised James didn't come back with a smart-ass comment!!😂 Yeah I know what I'm doing, if you leave me alone I'd have it done by now❤!! It's a Ford you going to be replacing more than spark plugs!!
Howdy triple R farms
Check the fuel pressure on that F250.
Daniel, Awesome stuff, Granny 😍, Me,2019 Colon, stroke, Brain injury, feet,arm,hand ; 2020 Cancer 4 Stage. GOD is good . Thank you all, Family Farms. (N.G Ind. )
God Is faithful ..
And God is good.
Daniel that f250 has jumped timing , those engines are famous for cam phasers.
This is definitely something to look at, also check fuel pressure it may be low because of bad fuel pump.
Looks like you’ve got quite a bit of dirt to move!!
If the F250 has coil packs, you never change just the spark plugs without changing the coil packs as well.
You might also want to check the fuel filter and pressure regulator and fuel pump to
Heard something I have not heard in many many years John Brown my grandmother would say that when she got aggravated
Daniel, I watch your videos each week religiously! I click on the thumbs-up on each one! I have turned on several friends and family to your channel! Every now and then at te end of your videos you mention that you read All the comments and try to answer any questions? I have asked the same question on several videos and haven't seen any comment or answer to my question about super singles flotation tires vs the narrow skinny tires you'll run on most all of your equipment? I know you have a set of both for your Rowgator and understand the purpose of getting through the tall crops laye in the season, but during the field preparation and setting up rows you have much better flotation and traction with super singles and even more so with rubber tracks which I've heard the cost is even more? I thank you for your time spent bringing us these videos, I was working on my uncles farm on the summer months and he only ha 2 daughters and wasn't interested in taking over the farm, this all came down to the late 70's early 80's I wanted to go to NC State University and study Agriculture but mu uncle came down with colon cancer and passed away, My Aunt and Cousins sold off the farm and equipment, leased a lot of the land for income and that was the end of my career farming! You and your Dad really hit home in that respect and for that reason alone I thank you sir! God bless you'll (family and crew)!
Granny, Good Morning! Great video Daniel!
Your F250 sounds like a Cam Phazer issue. They are known for that. It's a P0305 code usually.. Also Check your injectors by a scan tool to read the fuel parameters . Good luck with it 👍
ENJOYED WATCHING THE VIDEO DANIEL AND FATHER 😊
Very good video Daniel. Good morning Granny
One way to find out if it's the coils going bad, is to swap the coil pack from a cylinder that's misfiring with one that isn't, and if the problem follows the coil pack, then you'll need a new one. Enjoyed the video! 😊
Try fuel regulator valve
You definitely got 1 or 2 dead cylinders on the F250, head gasket or valves or cracked head, you can hear it when you are cranking it, 👍
Hello Granny. The channel is finally gaining subscribers. Well deserved too.
I was in your neck of the woods recently and drove around Benton. Very nice little community! Roads are kinda of narrow, hope you have extra mailboxes on hand.
I Always give the thumb up first come on Didn't know made no different,, I know they're always gonna be good., God bless hi Granny.
Always a rush to get everything ready for planting!
Good morning Granny, I hope your doing well!
Daniel hope those pipe down tubes endure going across the field, would like to have seen you use some rigid flex tubing…thanks for sharing your videos!
I’m sure we will be doing some adjustments to it this year, thanks for watching 👍😁
Viewing the water damage with the drone could help map out a solution to flood waters.
Timing on the 2 fiddy.
Good morning Daniel and Granny.
Thanks for sharing
It's great that you guys can start farming in February. I'm in upstate New York....yesterday morning when I got up it was 10 degrees, farmers here probably won't get into some of their fields till May....
Wow that’s crazy, thanks for watching 👍😁
very nice 😊😊😊😊😊😊
check the timing on the 250
Ck the timing chain
Love you're video's enjoyed seeing dad what a work horse he is also enjoyed seeing Mark and James any business or farm's really needs good reliable employees keep up with the great video's enjoy watching from Ohio
Loved the video. Planting time is coming on fast. Stay safe
Hi Granny hope all is well with you. Hopefully you have gotten out and enjoyed some of the better days.
As usual Daniel great job on the videos.
Thanks for the tour
I always hope you have optimal prices on all the commodities you raise. Hope all those prices hold up.
I hope so too, thanks for watching 👍😁
May the new season be fruitful
I sure hope so, thanks for watching 👍😁
Good morning Granny have a great day
Check for codes? Thanks for the video Daniel keep up the great work 👍❤️❤️. Take care of yourself and family and friends and be Blessed ❤️. Hi Granny have a Blessed day ❤️.
Thanks for watching 👍😁
Great content!! Take care...
Thanks the Video Daniel, lots of people these days Stream UA-cam on their TV’s that’s not as easy to like & subscribe on as watch on Phones.
👍
Another good one Daniel 👍
THANKS!
Seems like it may be a timing issue on the F250.
Enjoyed the video Daniel!
You need to but coil pack on the 250 that's way its not fireing
Good video good to see y'all
Daniel, are your yields better with tillage vs no till? It seems like y’all consistently work everything up. Maybe has to do with your soil types? Just curious
Good job guys
Have you been able to lock in a price that you can be satisfied with?
I had a truck that was doing the same thing and it ended up being a timing sensor.
The way that engine on the F250 was cranking, it sounds like the compression is low on one or two cylinders. It should sound more even than that.
Maybe connect the packer to the disc 👍
We used to and it slowed us down a good bit, thanks for watching 👍😁
How is Granny doing? We're all concerned! My wife askes EVERY time I watch your videos.
Granny is doing great, thanks for watching 👍😁
Thanks and nice gob i am from israel😊
Awesome thanks for watching 👍😁
Hi Danial do u watch Any other channels. Farming I other country's
Check the coilpacks
10-4, thanks for watching 👍😁
If that f250 is a 5.4 ,the sensors in the top of the valve covers are probably bad. It happens to about all of them arond 200k.
What kind of baseball is Tommy playing
Chicken wire and stones would help stop your erosion.
What row spacing are your planters? I can tell they’re not 30 inches. Mann you guys plant way earlier than we do up here in Illinois we’re lucky to get in the field doing tillage March 10 and planting by April 1.
We are on 36” for all our crops, thanks for watching 👍😁
I thought I heard you say that you weren't going to plant cotton this year.
Prices have changed a little so we are going to have some cotton this year, thanks for watching 👍😁
Why don't you use a Fault Reader on the F250???
We have been I just didn’t get it on camera, thanks for watching 👍😁
Ford are known for bad coil packs I had 2 with the v10 both had to put coil packs in about every 120 thousand miles
Not sure how you can make money on 80 cent cotton. We aren't planting any this year
How many acres is Triple R Farms planting in Cotton this year?
Thanks for watching 👍😁
try coil packs
Got it, thanks for watching 👍😁
fuel pump and fuel filter
Thanks 👍😁
I’m hearing prices are gonna be pretty bad this year. What are you gonna plant? Corn is cheap as dirt
We are planting soybeans,cotton,corn, and Milo thanks for watching 👍😁
@@TripleRFarms I use to farm corn soybeans cotton and tobacco! I was born and raised on the farm! I stopped farming in 2015. I know all about it. I enjoy watching you guys from here on the NC/SC border we are 20 miles west of North Myrtle Beach SC! Good luck this year!
Daniel do you contract your cotton planting
No we plant it all ourselves, thanks for watching 👍😁
A question I have always wanted to ask is why is the father always doing more work than the son , quite different
I don't see an AF11 in all that green
We will let them get all the kinks out, and maybe get one next year, thanks for watching 👍😁
Who is your new guy Daniel?
case ih has the red rodent packs that work or moth balls.
Really didn’t know that, thanks for watching 👍😁
Those coils are probably $100 a piece, he’ll spend $800.00
I heard another youtube farmer say that corn was at $3, how on earth can you plant corn at that price?
I can't speak for Triple R, but we only plant about half the corn we once did.
And, if possible, we store our corn in bins til the price goes up.
Sometimes we sell to livestock producers.
Why don't u knife it in instead of dribbling it on
It’s a ford normally junk!!!!!
Buy genuine ford parts not napa
10-4 thanks for watching 👍😁
Why do you guys run small old style corn planters why don't you get the newer high speed air planters
Coast to much
Timing on the 2fiddy.
Man if Daniel listened to the comments he’d be $30 million in debt😂
A 12 row planter isn't small in this part of the country.
And those JD 1720s work off vacuum.
Thanks for sharing