3 AMAZING DIY IDEAS WITH RGB LED STRIP.

Get the Best Price at Indiamart:
RGB LED Bar Strip: dir.indiamart.com/impcat/rgb-...
Pixel LED Lights: dir.indiamart.com/impcat/pixe...
RGB LED: dir.indiamart.com/impcat/rgb-...
Disclaimer.
video is for education purpose only. Copyright Disclaimer Under 107 of the copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright status that might atherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
WARNING:
Some ideas, And Experiment can be Dangerous.
And For that you don't Risk and Damage your self
and the Environment, I am a professional in my business
with a lot of experience!
Every video, even that is completed with compliance
with the all sefty measures. Enjoy the video and Eat the sweets.
This video is for demonstration and education purpose only.
Each demonstration presents risk and hazards
that must be fully understood before attempting.
And should be performed only by professionals -~-
#rgb #led #ledcontroller #diy #idea #jugaad

[@IndianJugaadHacks]

Get the Best Price at Indiamart:
RGB LED Bar Strip: dir.indiamart.com/impcat/rgb-led-bar-strip.html?YTI&
Pixel LED Lights: dir.indiamart.com/impcat/pixel-led-lights.html?YTI&
RGB LED: dir.indiamart.com/impcat/rgb-led.html?YTI&

[@01Hudesohn]

Tolle Idee und durch die Alu Dose auch vor Überhitzung geschützt.. Top

[@chrisw1462]

It's an interesting circuit. Why did you feel you had to ruin the video with a clickbait thumbnail???

[@Cotronixco]

In the third one (the ring counter), replace the 1 megohm resistors with pots, or 100k's to make clocking 10x.

[@F4BON3]

2:50 I like the fact that you found a can with the exact diameter needed for the lights to align. I will have to do that project myself, nice idea.

[@IndianJugaadHacks]

Thnx

[@stevebabiak6997]

You can figure out the can circumference must be equal to the distance between the LEDs that you want to align in a straight vertical line. Circumference is equal to PI x diameter, so diameter is the distance between LEDs divided by PI.
If your can is smaller than that, just use some kind of adhesive tape to build up the can to suit the size you need. No need to get lucky in finding a can that just happens to be the exact size.

[@amgineacoustic]

10 mins in still wait to be "Amazed"

[@MWPadazhetski]

Прелестно! Буду себе такое делать.!:-)))

[@MikeTechnology]

The third one gave a idea 💡 thank you good job

[@IndianJugaadHacks]

Thanks

[@IceXXX69]

Dudes got an infestation of bugs...Call the Orkin pesticide man...

[@jkitchens71]

With a RGB led pod...what is the white wire for....positive???

[@hqgprojectofficial]

You are Great 👍 keep it up 💪👊

[@IndianJugaadHacks]

Thanks

[@craigsteyntheartistcraig3592]

You could wrap the first light in some plastic wrap to diffuse the colors... otherwise the secondary colors are pretty useless and the fade dim effects.

[@kieldelapena7550]

@6:23 what type of switch that 3 lines?and where I can buy that? Thanks and look amazing.

[@elbasyarbasyar9325]

in the second video, what adapter do you use?

[@SHAHRIMMOHD]

wow...good idea...let me try too..

[@IndianJugaadHacks]

Thanks

[@singingzone3056]

Aap ek 18650 battery charger jo fully home made

[@sheikh030]

the thing i liked is that you made the third one without pcb

[@ReighKnight]

The 2nd idea was awesome

[@IndianJugaadHacks]

Thanks

[@learningelectroniccircuits]

The first one seems interesting

[@azizrustemov8547]

I love how He said the link is in the description and literly no link is in there

[@Smarterpeytongames]

It's literally right at the top lmfao

[@ozgenerzi3900]

The last one is very well. If add there mini Bluetooth device with 2.0 ✌️Thuglife 😁thumsup

[@cieuxAI]

What kind of soldering iron is that?

[@chriftahiri6815]

Gooood 12volt or 24volt

[@IndianJugaadHacks]

12v

[@innovative_ideas]

Pls reply green color ka jo background hai iska nam kya hai pls sir

[@IndianJugaadHacks]

Bhai iska naam cutting mat hai

[@joanmondero5448]

#2 video...can it be compatible with 12V ?

[@onezavalar]

Crude But effective (Think Seven of Nine)

[@IndianJugaadHacks]

Thanks

[@TiTaN30RUS]

Тараканы бегающие по стене добавляют особый антураж 😄😄😄😄👍

[@IndianJugaadHacks]

Thnx

[@led3603]

Как будто не убирается в своей мастерской 🤣

[@user-me8gv6vk9v]

Жуть)
🛑заходите в гости💡🛑

[@alangeoffrey5959]

I'm very curious how in the first clip a rgb strip, analoge led strip has been altered to recieve a specific signal? Skipping and Changing, running a specific Digital code. We make total led strip screens, our last project was 120000 led pixels, digital. Analoge pixel, this is not possable.

[@samsonyeboah2575]

how can i get some to buy ghana here

[@nigaros3618]

can you say what components do you use in the 3rd

[@brazilcreative1063]

make a spy microphone 😃👍

[@user-yu2wi6rk2g]

Мне нравиться молодец все делает минимально деталей и на выхлопа целый девайс лайк .

[@ankursingharoy2670]

Capacitor kitna v or kitna uf ka hein ???

[@drpeppaplayz1258]

Number 1 would look Amazing with govee led lights instead

[@JAI141986]

Good job

[@IndianJugaadHacks]

Thnx

[@Itzrival3150]

That’s cool

[@IndianJugaadHacks]

Thnx

[@Itzrival3150]

Your welcome

[@innovative_ideas]

Sir apka background me jo green color ka hai uska nam kya hai pls reply me sir ur big fan

[@IndianJugaadHacks]

Bhai cutting mat hai ye ✌

[@Kaminari_Kitsunokami]

On the second one instead of buttons I probably would have used a potentiometer somehow

[@delreypimp]

Maybe find a way to get rid of insects first? Maybe? Possibly?

[@daved8551]

What is the purpose of the final example (#3) with the soldered circuit? I cannot discern what that did that was any different than the rest?

[@Cotronixco]

Ring counter.

[@boboc5]

I see the bugs from the wall! 😂 More atractive than the light!

[@surepallivarun]

How many hours it can work

[@widinugroho481]

Nanya mas, apakah db3 ada +/- seperti dioda ?

[@akshayacharya4538]

Board repiar ka video pls

[@Stu81]

Hi can anyone tell me if it is at possible to run multiple single 3mm led diodes but connect them to an existing led strip light to work together?

[@rithvikpatil8342]

,👏💐💐💐

[@gabrielcejas273]

Muy bueno, lo que si fijate la próxima de matar algunos bichos de la habitación !!

[@rcjeff2507]

I tried the number 2 hack why it won't flash? Just constant light?

[@Michael_101]

Pro tip: If you will buy a RGB led strip, see if it 5050. The 5050 led RGB strip have 3 LEDs in every diode. But the LEDs in the video, have 1 per diode.

[@ursulastronaut5033]

mine s is 5050

[@deepaakkumar786]

Nice.

[@IndianJugaadHacks]

Thnx

[@mohdziyauddin6273]

I HAVE 24 VOLT RGBW LED then value & NO OF -
MOSFET
CAPICITER
RESISTER

[@MrGPBBOSS]

I have made No. 2 on 2018

[@whtly]

So, we have a curtain string lights.

[@singingzone3056]

Nice bhy

[@IndianJugaadHacks]

Thnx

[@zlatkohrustanovic5745]

ok super

[@IndianJugaadHacks]

Thanks

[@drelectronics13]

Bro what's price of those ,whole RGB LED strip.with controller

[@nickiw8194]

Depends on length. 3 m , you can buy for around $9

[@jaybalbuena5045]

sir can i ask what is that straight wire you used to connect the 3 switch to the rgb led powerjack and what its called?

[@whtly]

DC (female or male)

[@HannTheftAudio]

I spotted a few annoying issues with this video that made me hate it. But I drew that line when I'm the 3rd clip he goes to place the 2nd capacitor on the transistor and the first transistor magically changed. I watched that part 10x to see if my eyes were just joking with me and I can still see the change. Something's wrong.

[@Umut2Ozkul]

super

[@IndianJugaadHacks]

Thnx

[@bad.a.d.d]

what kind of bugs are on the wall moving around?

[@oracai1654]

LMFAOSO

[@GiC7]

Great

[@IndianJugaadHacks]

Thanx

[@jlfordabeeb6407]

جيد جدا

[@innovative_ideas]

SIR reply ke liye thanks , pls mere channel sirf 1minute k lye visit kijiyega apke jaisa video hai

[@IndianJugaadHacks]

Ok

[@HackingInfo]

2:10 upar wala red khara ho gaya lagta hai?🤔🤔🙄

[@FunDesigncom]

jak wykorzystać taśmy LED.

[@DavidSmith-ps5nd]

I didn't see anything amazing about these.

[@PeterRichardsandYoureNot]

Lost me when you decided to actually show, in real time speed, the wrapping of the can…editing, my friend.

[@karthik3652]

Sir Pls Give the LED Strip Light Link In Description..Those Lights Were Very Nice..I want to buy.

[@wendyli6812]

nice to meet you,i can provide,pls contact me , thanks.

[@abhinav4331]

@@wendyli6812 I want how can I contact

[@AshrafKhan-dq9cz]

Bhai RGB light ko 84 volt se kaise track mein lagana

[@kingfish93]

I think the ant liked the lights.

[@arandomguy8352]

The thumbnail looks like a fire hazard

[@YellowPurple]

❤️❤️❤️

[@IndianJugaadHacks]

Thanx

[@vaclavkostka8000]

01:00 No RGB strip!!! It is a tri-color RGB strip!!!... 04:36 It is an RGB strip.

[@fashionstile]

hi i have a 5v rgb led strip i would like to turn it on in the car but i don't have the driver, how can i make it turn on in the car

[@MrProsperty]

Take apart a car USB charger and use that I've done it plenty of times

[@fashionstile]

Jorge Del Valle
Could you make me a pattern so I can follow it?

[@MrProsperty]

@@fashionstile I'll upload something in the morning check back with me later 👍

[@daveoflogheadaxemods5387]

yall talkin bout lights and all I can wonder is what bugs are crawlin around the place.

[@jorgetorrero3673]

Why would anyone want Led lights wrapped in a can.....

[@Yankeesheepdog]

What’s with all the roaches?

[@stanisawmuszynski8978]

Dobre👍🇵🇱

[@IndianJugaadHacks]

Thanks

[@CrushSakh]

Что за музыка в первой половине видео?

[@BigFire505]

А шазамнуть слабо?
Мое открытие на Shazam: Ehrling - You And Me. www.shazam.com/track/344316725/you-and-me

[@amir_machaka]

what's the name of the music please ?

[@oracai1654]

Lift Yourself by Kanye West

[@chrislewis2262]

And that my friends is how you destroy a RGB LED. Especially if it is a long run, they are not made to handle that much current.

[@coolcolumbus]

True

[@davidwiley652]

Wow! It makes the roaches come out…

[@IndianJugaadHacks]

Thanx

[@technologic9078]

good

[@IndianJugaadHacks]

Thanks

[@Kanaev_Ergash]

Эргаш конаев

[@amazingsomething9869]

Good

[@IndianJugaadHacks]

Thanks

[@damiancitoddami5663]

so good. even the cockroaches came out to dance

[@banditoincognito8950]

ants.

[@djjohnnyg3263]

😂

[@user-rs3ns4jc1e]

Осталось совсем малость... Найти всю эту электронную хрень

[@pspgo-vw7jr]

Лох

[@user-rs3ns4jc1e]

Твоё имя??? Иди лесом дитё неразумное

[@HomnixHD]

My dude you got bugs on your walls

[@Ramdeep-lp5ot]

❤️❤️❤️👍👍

[@IndianJugaadHacks]

Thanks

[@ankitpanwar7071]

vestige me ho kya aap bhi bhai

[@IndianJugaadHacks]

Mera dost hai vestige me.

[@ankitpanwar7071]

@@IndianJugaadHacks ok nice video

[@coolcolumbus]

You guys keep doing jugaad, forget engineering and science, these jugaad won't take you anywhere in life, soon this way will have a Ministry of Jugaad. The problem is this attitude let's us accept and let go of everything.

[@kjm-ch7jc]

Why don't you have a voice ?

[@powerrespect1489]

👏😁

[@IndianJugaadHacks]

Thanks

[@Gh05T-k3EpR]

Como hacer basura a lo pendejo con tiras rgb.
Es tan impractico y bisarro que parece lo que hacen mis queridos hermanos de India.

[@yousuck2000]

unwatchable due to bad choice of music.

[@levising7144]

fax

[@voce3337]

Where are the amazing things?

[@muthubram3468]

muthu brama

[@IndianJugaadHacks]

Thanks for your valuable comment

[@levising7144]

these arent really amazing ideas or life hacks... unless your a professional engineer

[@muralikrishnan8277]

No words, in the idea for next level, thinking about i loved much, great bro, congratulations, continue to in your new videos, greetings

[@IndianJugaadHacks]

Thanks for your valuable comment

[@TheBypasser]

OMG what a mess... atTinys are cheap af but in 2020 people still try random clumsy circuitry (very unreliable too)...

[@rjl110919581]

sorry good kill by google here all cut up adds