How To - Install Second A/C with Keystone In-Command!

How to install a second air conditioner with Keystone’s In-Command Global Connect
Parts Needed:
-DOMETIC AIR CONDITIONER RELAY CONTROL BOX RV 3313191.00
-Dometic 3105935.047 Quick Cool Ducted A/C Ceiling Assembly
-Dometic Brisk II Air Conditioner
Item No. 630173
-Dometic 3316945.021 Gateway Cc Rv-C 20' R 1.5.2.0 O
-Dometic 3100895.006 Bolt Kit - 6" Bolts, Pack of 4

[@stevecreek8915]

Nice video! I had the same thing with the sawdust. Twice or more air movement really stirred it up!

[@allenpearcey1289]

Thanks for the video getting ready to add a front ac to my cougar as well. I did want to mention to you. It will help the volume even more And most of all, quiet, the AC. Look here and UA-cam for R V AC dverter. Very easy to do and well worth it like I said. Adds the volume and quiets the unit.

[@MikeMalkowski]

You didn't have to shut off the power to. The camper, there are breakers and fuses for the ac you could have shut off to kill just the ac circuit.

[@bradrussell4663]

Thank you for this video it was very helpful when I installed my new air conditioner

[@mileswebbjr9987]

Thanks for the video very helpfull

[@garymcguigan4426]

I have the coleman ac unit in my 2022 cougar 24rds, would you happen to know the parts needed for that? Excellent video by the way.

[@Mr.Marker1]

Thanks for the video! I'm starting my second AC soon. How did the gasket seal end up working against the eternabond tape? Since it's been a while have you noticed any problems?

[@vannooch]

I was also curious about this. Do you have an update on the AC seal?

[@Mr.Marker1]

@@vannooch I used the tape and it worked great.

[@patrickgray6462]

Please list the parts. I am interested in doing this in my Cougar.

[@user-ir4lz3yt7x]

Could you tell me what size unit you got and everything because I have the exact same camper. Thanks in advance

[@davidholland5855]

Great Video. Are you having issues with the InCommand system when the cabin temp is below 40 or above 100?

[@modchipman67]

Hi David, can’t say I have had any problems up to this point. It gets plenty warm and cool in KS but it seems to do fine even in the extremes.

[@milom.2057]

David, I’ve been having issues with what you have described. Dometic is pointing a finger at In-Command and In-Command is pointing a finger at Dometic. I think I’ve been able to narrow the issue/fix. Have you been able to resolve your problem?

[@jorgecastaneda6578]

Thanks for sharing your video. Did you make the 4 pin jumper that you inserted into the rv-c2 slot in the Gateway?

[@kadekarns7799]

Hi sir, got my second AC installed at camping world and on my inCommand monitor it shows just the fahrenheit symbol still on the zone for the front AC optional and won’t come on. What do you think the issue is? Thank you in advance!!

[@ropnjessi]

I need to do the exact same thing you have done, however I am confused on the part numbers on the Brisk A/C II all I see is "B57915.XX1C0" for a model number not 630173? In my case on the blank plate it calls for a "511482 Brisk Air II - 13,500 btu. Can you provide a link?

[@jd8989]

This was definitely helpful. What parts did you use? Also where did you get them from?

[@modchipman67]

Hi JD I updated the description with the parts list. Let me know if you need more info

[@pantera6925]

There is a lot going on here in terms of wires. Were all the wires that are required to operate with the iN·command there? I was under the impression only power is there. Any instructions with it all that assisted in any way? Or did you go completely off of the rear ac install?

[@modchipman67]

There will be a 120v power, 12 volt power, the communication wire from the rear air all in that box. The rest of the wires come in a harness with the relay control and gateway. It’s actually simpler than you think. Just take your time and read the labels on the wires.

[@josephlenderman3945]

I got a Colman to match the back is the gateway device universal or is it specific to dometic?

[@modchipman67]

I am not sure I would imagine the gateway will work as long as you can hook it to your relay control box

[@chrismonaco512]

Can I have all part numbers for this project please

[@floggum]

There are 4 dip switches on the gateway which one or ones did you put in the on position? Thx

[@markwgundert4251]

Did you consider installing another 15k instead of the 13.5k?

[@chrismonaco512]

Can I have all part number for this project please

[@modchipman67]

Hi Chris I put them in the description let me know if you have issues

[@krisreid6647]

Where did you buy your gateway and controller?

[@krisreid6647]

Do you have a link for the gateway?

[@modchipman67]

I bought RV Auto Parts link below
www.rvautoparts.com/Dometic-3316945021-Gateway-Cc-Rv-C-20-R-1520-O_p_716697.html