Dropping the Acty Fuel Tank / Helping Out With a Beat!
Вставка
- Опубліковано 5 вер 2024
- I hurt my hand at work so I needed some light duty tasks to keep me busy, so I opted to remove the wood floor and the fuel tank to get ready for more work that's a little farther down the road.
Also, since this isn't the most exciting task, I added in some clips from a few months ago when I helped out my buddy Will figure out the timing belt on his new Honda Beat!
Check out the Honda Acty Shirts!
660club.bigcartel.com
Thanks for watching!
IG:
@milehighkei
Music:
Colin Ward aka Tokyo Drift 4Ever
Rest in Peace
alphabets.bandc...
killdby.bandca...
#hondaacty #keicar #e07a
I only watched a few minutes of the video (just wanted to see the fuel level sensor removal) but there was a lot of bad info. Sorry to come across harshly but you should really consider getting a manual or doing more research on your vehicle before making a how-to video so you know what you’re talking about. The first “fuel filter” you pointed out is actually a two way valve for the gas tank vent line. The “heater core” you pointed out is actually the A/C condenser. And that other “thing in the fuel system possibly second fuel filter” next to the fuel pump is the actual fuel filter. Again, sorry to be harsh. Just trying to point out some bad info
Thanks for this. The few manuals that are out there are in Japanese, so a lot of what I do is just jumping in and figuring it out as I go. Wanted to point out that this was a year ago and by doing this and routing the new fuel pump and fuel lines I learned how the whole system works. This wasn’t meant to be a how to video, more of just “what I did in the garage this weekend.” I corrected myself with the actual fuel filter and the external pump. I’ll try to be as accurate as I can in the future, learning more everyday.
@@Milehighkei If you search for “James Danko Acty manual” you can find an english version of the official service manual. There’s a few sites that sell a hard copy version but there’s also a free PDF version floating around. I find it to be very informative and useful.
Hey brother quick question your beat motor is a Mtrec or a PP1?
The beat motor is MTREC E07A, PP1 is the chassis code for the Beat
Are you still planning on going to the oct 4 Honda meet in colo springs?
I do plan on going! Not sure if the van will be ready in time, if not I’ll be bringing my cb750
@@Milehighkei Dang. I hoped to see your acty but I’ll see you there either way :)
First!