Me alegro por ustedes que con pocos recursos hacen un trabajo increíble, maravilloso,,no se preocupen por los comentarios que critican sus labores, quizás ellos nada daben que esto es un trabajo muy profesional.
NiCaSil coating? Hah! This is far more advanced! The Ca and Si come from all the rocks and sand they casually throw into the furnace. As for the Ni... well, there.must be some trace content in all that scrap :-)
Bello ed interessante il video. Purtroppo norme di sicurezza zero. Ma quanto potranno durare quelle camice di cilindro ed i pistoni che dovranno lavorarci dentro? Fatte fondendo qualsiasi scarto di metallo, pezzi di ghisa, pezzi di ferro, bulloni, senza nessun rispetto della corretta composizione della lega metallica. 👍👍🖐️
Hey! How dangerously close to the furnace top is the worker charging the furnace is! Has anyone told him that it emits deadly poisnous Carbon Monoxide ? No even a flue over the top, what to talk about precipitators/ scrubbers! What is the chemistry of metal mixture charged and of the melt? Microstructure and Mechanical Properties? Are any vehicles lying there with engines siezed?
@4:25 person that stuck his bate hands into auger to check sand consistently needs retrained or may as well order a couple prosthetic hands for them for soon
@@НелинейныйПовторитель Не знаю уж что там за масло, обычно используется кварцевый песок, глина бентонитовая или каолиновая и барда, так называемый лигносульфонат. Цена копеечная, регенерация почти вечная.
There are at least 5 types of cast iron. There are increased requirements for cast iron, which is used as engine cylinder liners. In accordance with state standards, cylinder liners are made of gray modified or alloyed cast iron with mechanical properties not lower than those of SCh 21-40 cast iron, with a hardness of HB not lower than 170-190. Liners of high-speed engines are heat-treated to a working surface HRC hardness of at least 40. What kind of cast iron is used here?
It always amazes me to see people doing this. Making molds and castings but I can’t help but wonder what the final product is. I know it’s cast but cast sterl ir cast iron as I see a mix of both going into the furnace along with what I assume is coal for its carbon content being incorporated into the metal. Still fascinating none the less. And they recycle everything possible.
Definitely dangerous work. The bottom of the carry flask for the molten steel looks cracked considerably as it leaks molten metal while they walk and do this work in sandals. Situational awareness is probably very high among those with few to no molten metal burn scars.
Dose anyone know what they actually use for there casting sand and what they mix in it plus a rough ratio. The stuff I use over here in the UK the so called green sand that's red is crap. trying to keep the edges from coming out with the part your trying to make a mold of is impossible it just brakes away no matter what I do and how hard its compacted.
для склеивания песка используется патока - отход сахарного производства, там где есть сахарные заводы, её недорого продают для добавки в корм сельхоз животным
With those inconsistencies of metals being smelted you can bet what ever they choose to make won’t last long! Many years ago a crank shaft was made in India this way for a small British car company. Needles to say it ruined many engines and the reputation of the car company.. can any one guess the car company I’m taking about.
Пугает конечный продукт, так как отсутствует контроль на производстве, а в есть идёт и простые стали и чугун, быстрорезы и трансформаторная сталь. Ну и наш инженер по охране труда бы сошел с ума)
Meu o serviço é bom top,mais segurança 😢😢nada EPIS nada de petiberiba,tem sorte de não dar acidentes ????? trabalhei numa empresa metalúrgica tinha segurança total sei cm é perigoso o trabalho de fundição???mais não é fácil não????
Создание завода и предоставление людям достойной работы с безопасными условиями труда, тут и речи не идёт. Качество материала нет, не слышали. А ведь эти десятки общей трудятся на какого то капиталиста, и являются на данном производстве просто расходным материалом. Так как тебя легко другим бедняком.
People ask why American industry won't come back.. Because Americans are too spoiled to work for pennies let alone for pennies in a foundry let alone for pennies in a foundry with no PPE. We have it way too good.
@@garfield2279 I want more people that appreciate how good they have it that are willing to work in the best industrial workplace environment the world has ever had.
Like a Dantesque circle. the hell of the Divine Comedy. of the convicts. they don't have shoes, they have simple slippers, even flip flops. without job protection. accident at work. average life 40 years.
Пипец, там металл горит, дымится, а они в шлёпках и голыми руками почти его таскают , я в шоке 😂
Every employee handling molten metal must wear safety sandals!
And use the supplied safety squints!
You forgot the heat shield, safety pajamas
Wonder what junk metal they make piston rings out of? Anything they can melt I’m betting.
Кто-то там писал что из хлама-хлам ни хлам -а втулки классные выходят-супер-МОЛОДЦЫ
The scrap rate must be high. Notice all the scrap liners they had to put back into the furnace.
Rejected by quality control!
This is dream for safety inspector :D
You may not like it, but this is what peak production and manufacturing looks like.
I bet the metallurgy is spot on!
Probably used in Formula 1 engines.
Thanks ☺️
Hard working guys right there 👏🏼👏🏼👏🏼
Me alegro por ustedes que con pocos recursos hacen un trabajo increíble, maravilloso,,no se preocupen por los comentarios que critican sus labores, quizás ellos nada daben que esto es un trabajo muy profesional.
Судя по количеству гильз, они либо весь мир обеспечивают, либо у них самих это гавно держится пару месяцев и потом на перегильзовку мотор
Судя по тем гильзам которые мне привозит снабженец, всё это идёт к нам в Россию
Это для мототехники скорее всего диаметр для авто мал.
When you dont have OSHA slowing you down
Mucho trabajo, pero excelente resultado, muchas felicidades, saludos desde Morelia Mich México
“Don’t be bold,
Address your mold,
Guard it well,
Till it grows cold -
Or the Sand-man will come!”
марка металла ,а кто его знает !!! как и всё сейчас х.з.
NiCaSil coating? Hah! This is far more advanced! The Ca and Si come from all the rocks and sand they casually throw into the furnace. As for the Ni... well, there.must be some trace content in all that scrap :-)
No chemistry check, no hardness test, no pressure test. Allah barosa😂
Thansk
Так вот какая она третья экономика мира☝️😉
Bello ed interessante il video.
Purtroppo norme di sicurezza zero. Ma quanto potranno durare quelle camice di cilindro ed i pistoni che dovranno lavorarci dentro? Fatte fondendo qualsiasi scarto di metallo, pezzi di ghisa, pezzi di ferro, bulloni, senza nessun rispetto della corretta composizione della lega metallica.
👍👍🖐️
🤗👍
у них получается чугун особой марки - КП (какой получится:)))
Там супер специалист загружает в печь, у него в глазах рентген и спектрометр 😂
Muito bom seu trabalho
Hey! How dangerously close to the furnace top is the worker charging the furnace is! Has anyone told him that it emits deadly poisnous Carbon Monoxide ? No even a flue over the top, what to talk about precipitators/ scrubbers! What is the chemistry of metal mixture charged and of the melt? Microstructure and Mechanical Properties? Are any vehicles lying there with engines siezed?
Damn check out the leaking bucket spewing molten metal!
@4:25 person that stuck his bate hands into auger to check sand consistently needs retrained or may as well order a couple prosthetic hands for them for soon
And, the fella sticking his hands in the rotating agitator of the sand mold media that’s a good way to lose a hand or arm. OSHA what’s THAT
I must go there with my car. They will fix what other mechanics could not.
Кто там восхищается, а я скажу что какая там получается марка чугуна одному Шиве известна. ))))
СЧ20
Parecem saudaveis e alegres.! Mas falta muito recursos de segurança 😮.
Вот вам и точная механика
Неужели это г...о к нам везут.Везите в Европу и Штаты.
Там не дураки. Такое говно покупать не будут.
@@user-vc9nf7qo1d Вы шо, это высокопрочный чугуний Паки-паки, этими гильзами все двигуны в рэфэ гильзуют.
@@Ortsleiter88 это обычный серый чугун
Эти построенные английчанами фабрики до сих пор работают? )
Что Вы заливаете при смешивании песка ? Отработанное масло ?
@@НелинейныйПовторитель Не знаю уж что там за масло, обычно используется кварцевый песок, глина бентонитовая или каолиновая и барда, так называемый лигносульфонат. Цена копеечная, регенерация почти вечная.
Olá! Que material é esse que é misturado na areia, para fazer os moldes?
Ok i send tomorrow
It’s a minor miracle no one was burned, maimed or otherwise blinded.
.. that day ..
There are at least 5 types of cast iron. There are increased requirements for cast iron, which is used as engine cylinder liners. In accordance with state standards, cylinder liners are made of gray modified or alloyed cast iron with mechanical properties not lower than those of SCh 21-40 cast iron, with a hardness of HB not lower than 170-190. Liners of high-speed engines are heat-treated to a working surface HRC hardness of at least 40. What kind of cast iron is used here?
The FE type.
The type used here is whichever scrap pieces were lying closest to the furnace at the time of manufacture it seems.
lol who knows as long as a magnet somewhat sticks to it its good to go
@@khalidacosta7133 fuckin FE 🤣
All of them.
Would like to see how they line the forge with new liner
Funcionarios acostumado com o serviço duro. Parabéns.
Вообще ребята супер-им огромная респектище-на глазок -на коленях -с металлом как с супом-и-какая там техника безопасности-супер-респектище
ماشاء الله تبارك الله من الجزائر
It always amazes me to see people doing this. Making molds and castings but I can’t help but wonder what the final product is. I know it’s cast but cast sterl ir cast iron as I see a mix of both going into the furnace along with what I assume is coal for its carbon content being incorporated into the metal. Still fascinating none the less. And they recycle everything possible.
Definitely dangerous work. The bottom of the carry flask for the molten steel looks cracked considerably as it leaks molten metal while they walk and do this work in sandals. Situational awareness is probably very high among those with few to no molten metal burn scars.
It chips away while being cut on the lathe like cast iron.
Right
This is Pakistan
There is no way the metallurgy is anywhere close for the application. (cylinder sleeves).
Металлургические заводы отдыхают
Safety first... well i give you some sandals and you are 110% safe 🤣🤣🤣🤣
😉
Is this a 17th century workshop ?
Pakistani
I think they got these machines from Ford factory from 1930's...
My question is can they meet international standard.
They are all six sigma addicted...
Очень опасно работают,нет даже обычной обуви, в сандалях кто работает с металлом 😂😂😂, вот вы титаны
so amazing , please, where is it ?
Thanks this is Pakistan 🇵🇰
Where's the board for how many days accident free.
Only death case are marked on the board, everything else is not considered accidents😅
Rebuild the Engine every 10.000 miles
Dose anyone know what they actually use for there casting sand and what they mix in it plus a rough ratio. The stuff I use over here in the UK the so called green sand that's red is crap. trying to keep the edges from coming out with the part your trying to make a mold of is impossible it just brakes away no matter what I do and how hard its compacted.
для склеивания песка используется патока - отход сахарного производства, там где есть сахарные заводы, её недорого продают для добавки в корм сельхоз животным
Cool to watch, but production rate is low. I guess low workers cost makes it profitable
Is this genuine, OEM or aftermarket? 😏
quality is on par with there safety
شفت كيفاه الحاجة ام الإختراع حنا والفو كولشي يجي ف لبابور ههه
И знают же-когда выворачивать этот металл-вроде должен остыть
Вес отливки небольшой,тем более чугун
With those inconsistencies of metals being smelted you can bet what ever they choose to make won’t last long!
Many years ago a crank shaft was made in India this way for a small British car company. Needles to say it ruined many engines and the reputation of the car company..
can any one guess the car company I’m taking about.
Work appreciated but safety must be needed: wear a mask, helmet ⛑️, shoes etc. Save your health.
Right
Some clever workers, but this is why OSHA exists.
But what do you do when 80% of the planet is like this
Those sandals must have asbestos soles.
For these mold dancer's they have special courses...
Интересно,а молоко им дают за вредность?????
Пугает конечный продукт, так как отсутствует контроль на производстве, а в есть идёт и простые стали и чугун, быстрорезы и трансформаторная сталь. Ну и наш инженер по охране труда бы сошел с ума)
❤❤❤❤❤
Meu o serviço é bom top,mais segurança 😢😢nada EPIS nada de petiberiba,tem sorte de não dar acidentes ????? trabalhei numa empresa metalúrgica tinha segurança total sei cm é perigoso o trabalho de fundição???mais não é fácil não????
You right
Skill is of no value in the absence of safety conditions
more of that "made in china" stuff🤣
Poor safety standards. No quality control. How do they ensure that the steel is of a consistent composition?
Гильзы не делают из стали. А делают из ЧУГУНА!!!!
They can’t
Создание завода и предоставление людям достойной работы с безопасными условиями труда, тут и речи не идёт. Качество материала нет, не слышали.
А ведь эти десятки общей трудятся на какого то капиталиста, и являются на данном производстве просто расходным материалом. Так как тебя легко другим бедняком.
Так как ты бы легко заменить другим бедняком
Right
osha left the chat
🤔
Братьям богдановым отправьте в крым
Middle age
Orribili condizioni lavorative
Хорошая работа!
But it's bad they mass produced the wrong measure engine sleeve and it's unethical.
Ну а где закалка ?! Это же сыромятина просто
People ask why American industry won't come back..
Because Americans are too spoiled to work for pennies let alone for pennies in a foundry let alone for pennies in a foundry with no PPE.
We have it way too good.
You want these ( non existent) safety standards in your workplace then?
@@garfield2279 I want more people that appreciate how good they have it that are willing to work in the best industrial workplace environment the world has ever had.
All thy need is a tree-!-
The quality has to be bad
👍
OEM quality 😅
It's too bad they use crap metal...
Bai apna namber to do
Шайтанметаллпроммаш
Zero Safety
This is just beyond fucked-up...
Bai rabta namber do yar
Ap apna number send kro do
Like a Dantesque circle. the hell of the Divine Comedy. of the convicts. they don't have shoes, they have simple slippers, even flip flops. without job protection. accident at work. average life 40 years.
Нахрена я учился 5 лет? Теория машин и механизмов, теоретическая механика, химия, физика, начертательная геометрия, нахрена?
А куда смотрит Грета Таунберг.....ведь дымит и ей всё что дымит не нравится....
ماشاء الله تبارك الله من الجزائر
ماشاء الله تبارك الله من الجزائر