How to Replace Front Exterior Door Handles 2008-2020 Dodge Grand Caravan

Поділитися
Вставка
  • Опубліковано 3 жов 2024
  • Buy Now!
    New Exterior Door Handle from 1AAuto.com 1aau.to/ia/1ADH...
    This video shows you how to install new front exterior door handles from TRQ on your 2008-2020 Dodge Grand Caravan. Door handles, especially the driver side, withstand daily abuse. It’s no wonder one might wear out or even break off eventually. TRQ door handles are precision engineered to fit your vehicle perfectly.
    This repair was done on a 2014 Dodge Grand Caravan SE 3.6L Mini Passenger Van 4-Door FWD Automatic and the process should be similar on the following vehicles:
    2008 Dodge Grand Caravan
    2009 Dodge Grand Caravan
    2010 Dodge Grand Caravan
    2011 Dodge Grand Caravan
    2012 Dodge Grand Caravan
    2013 Dodge Grand Caravan
    2014 Dodge Grand Caravan
    2015 Dodge Grand Caravan
    2016 Dodge Grand Caravan
    2017 Dodge Grand Caravan
    2018 Dodge Grand Caravan
    2019 Dodge Grand Caravan
    2020 Dodge Grand Caravan
    Tools you will need:
    • 8mm Socket 1aau.to/obEd/1A...
    • Trim Tool Set 1aau.to/oauW/1A...
    • T25 Torx Socket
    • Ratchet 1aau.to/ob5Z/1A...
    • Socket Extensions 1aau.to/ob4h/1A...
    • Swivel
    • Gloves 1aau.to/oaYm/1A...
    • Safety Glasses
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 5

  • @TRQ
    @TRQ  6 місяців тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @bebopalooblog2877
    @bebopalooblog2877 2 місяці тому +1

    Excellent! I don't want to change the handle, just remove the entire inner cassette, but yours is the first vid to show disconnecting the handle. Thanks!

  • @dennismiller8602
    @dennismiller8602 Місяць тому

    Excellent video!

  • @chuckmiller6085
    @chuckmiller6085 Місяць тому +1

    Access to two door handle bolts _Tip (Ref time 3:10 in video) In this frame looking for the exterior door handle bolts, note the rectangle seen as a piece of rectangular black tape above the square punched sheetmetal hole, Remove the tape to find a straight direct oval hole directly aligned over the two (8mm) bolts for easy removal with a straight extension. Likewise if you have the occasion to remove the interier door panel (for access to other interior window components) you will find another punched hole for straight access to the single 8mm bolt of the at the opposite end of the handle, (Unfortunately the car manufacurer, failed to provide an appropriate punch out through the plastic outer panel so access could be obtained here without panel removal).

  • @trevlouie
    @trevlouie 2 місяці тому +1

    Another way to change your door lock also if you lost your your key or the lock itself is damaged.