I have the same reel and when I pull line out with it in gear and with any drag it skips and makes a clicking sound and the retrieve handle goes backwards.
@@KYNJ1 what I found is that if the little metal flaps that are part of the ar dogs that pitch the ar cog are loose or bent it all goes to shit. I got a new set from Penn parts and it fixed the issue.
@@KYNJ1 See if you get in there and fix it yourself you'll have learned something about the reel. Which is helpful in future diagnosis and maintenance. In my case I got a new one from a guy that bought it for his wife than never used it for 20 bucks. Made a project out of it. Removed the level wind, removed the auto in-gauge, got an AR bearing and retainer cup from a warfare 20 for like 10 bucks and now it has instant anti reverse and better drag and lighter weight. Basically made it a warfare for cheap.
I have a Penn Rival 15LW. Can you tell me how the drag washers are installed? I noticed they are all slightly cup shaped. I mixed them up accidentally and now I need help.
Spring on the spool lever was a bear to figure out, but I got it. Thx for your vid. Tight lines!
Can u show me how to fix the line guide mine dont move when I reel in
I have a rival 20 how do I cast it with out the handle rotating and stopping the spool
My best advice would be “not to leave the handle upright on a cast also back off the drag completely in case the handle rotates upon casting”
i hate tht system when i cast hard it auto engages in mid cast …
any way to remowe it ?
Am not directly sure the unit would still function as intended, without it
@@Dp94 can you make a video on how to remove it
Them would be a fantastic reel if they were built better. Anti reverse dogs broke in mine.
Easiest way to fix a Penn is to buy a Daiwa
😂
I have the same reel and when I pull line out with it in gear and with any drag it skips and makes a clicking sound and the retrieve handle goes backwards.
My best guess it that the anti-revert pins are not sitting correctly (the two pins look like a music notes 🎶 )
Same for me
@@KYNJ1 what I found is that if the little metal flaps that are part of the ar dogs that pitch the ar cog are loose or bent it all goes to shit. I got a new set from Penn parts and it fixed the issue.
@@defmud80 so just return and get a new one
@@KYNJ1 See if you get in there and fix it yourself you'll have learned something about the reel. Which is helpful in future diagnosis and maintenance. In my case I got a new one from a guy that bought it for his wife than never used it for 20 bucks. Made a project out of it. Removed the level wind, removed the auto in-gauge, got an AR bearing and retainer cup from a warfare 20 for like 10 bucks and now it has instant anti reverse and better drag and lighter weight. Basically made it a warfare for cheap.
I have a Penn Rival 15LW. Can you tell
me how the drag washers are installed? I noticed they are all slightly cup shaped. I mixed them up accidentally and now I need help.
When I took the washers off I noticed they were in an order looking like this:” ()() “
I love your video say my name in one of your video plz