Це відео не доступне.
Перепрошуємо.
Prepaid energy meter project using GSM / Arduino [ with code and working ]
Вставка
- Опубліковано 13 сер 2024
- Prepaid energy meter project using GSM / Arduino [ with code and working ]
Timestamps:
00:00 - 1. Introduction of the project
00:28 - 2. Explaining the Modules we are using.
02:42 - 3. Practical Working of the project
03:59 - 4. Recharge the Meter through SMS & Relay Cut working
Relay ( Single ):
amzn.to/3cTgoSd
16*2 LCD:
amzn.to/3zfbQNt
amzn.to/3czMWjN
Arduino UNO:
amzn.to/3OF2Bfb
amzn.to/3OEzMzm
GSM SIM900A:
amzn.to/3PMT3jv
GSM Sim800l:
amzn.to/3zhSuqV
Code Download Link for the project:-
drive.google.com/open?id=13tX...
circuit diagram link of the project:-
drive.google.com/open?id=1zhc...
-----------------------------------------------------------------------------
"Circuits Bazaar" Social Media Link
- / realjsrana
- / circuitsbazaar
- / circuits_bazaar
- / circuitsbaz. .
Circuits Bazaar provides basics and advance level learning of Electrical and Electronics Engineering through Projects and Tutorials. you can ask question about your problems, request for a video.
-----------------------------------------------------------------------------
----------------------------------------------------------------------------
Background music information -
Big thanks for giving us copyright free music
Track: Distrion & Electro-Light - Rubik [NCS Release]
Music provided by NoCopyrightSounds.
NCS: Music Without Limitations
NCS Spotify: spoti.fi/NCS
Free Download / Stream: ncs.io/rubik
Electro-Light
➞ Facebook / electrolight. .
➞ Twitter / electrolightedm
➞ SoundCloud / maskedacoustic
Distrion
➞ SoundCloud / distrion
➞ Facebook / distrionmusic
➞ Twitter / distrionoficial
--------------------------------------------------------------------------
#GSM_Based_Enegy_Meter #project #Prepaid_Energy_Meter
how did you taken out connections for opto coupler i took parallel to the count LED but its voltage is just 1 and sometimes there is no output please let me know how you did that
Nice explanation..
Thanks for the feedback brother
Sir can you share schematic arrangement of prepaid energy meter using arduino because I cannot fount energy meter and gsm in proteus for stimulation
please visit circuitsbazaar.com its available there
nice project......I wish u all the best
Thanks a lot brother .....
welcome... I like your project
Sir kya really phone se balance pay krna parta h tabi project work krta h
Ya fir programming se chelta h without pay💰........
?
its working on message sending from mobile ... but you can add actual payment portal as well with little bit extra efforts
Sir, as u told about opeartion of the project but where ULN2003 used and u have also not explain about which compents is used where, that's why i am requesting you to please explain about componts specification.
Instead of ULN2003 i have used Darlington pair of BC547 transistor. if you have IC then you can go for ULN as well. I am going to upload another video of improved version day after tomorrow.....
What is challenge in this project?
Connecting the meter to the project
How can I get the third terminal of energy meter which is connected to optocoupler.... As such the energy meter doesn't have any terminal for that except input and output terminal... Please help
You have to open it and then you will find pulse LED..... from there you will get third terminal
@@The.Innovative.Indian okay sir got it thank you
Brother how did you connect to led
Sir code me jo number likhna h aur jo gsm modem me h wo same hona chahiye ya phir alag alag
am kindly the circiuit diagram for Darlington pair of BC547 transistor and a relay
the circuit diagram is very simple
www.electronics-tutorials.ws/blog/relay-switch-circuit.html
@@The.Innovative.Indian thank you very much
Sir I make this project but I can not see anything on LCD
And how I recharge to card of GSM module
check the LCD Potentiometer settings .... rotate it to tune the lcd display ...... you can recharge it by sending messages
Sir codes provided in the link was directly flash in the aurdiuno or do we need to change something
Only mobile number you need to change
Sir can you please tell me why lcd only print till Finding Network what's a problem
I think there is a problem in your GSM modem you should look into the connections properly
very nice
Thanks
I have tried this but I'm not getting output.I can't understand how to connect motor driver here please send me a detailed circuit diagram other than the image in link
you don't need to connect motor diver.... instead of motor driver you need to connect single relay Darlington pair driver for the relay
what is the rating required of CT and PT in this project ?
here we are using only pt which is 12-0-12 volts
how did you access the l+ and l- terminals in the energy meter ? pls reply sir
Through Optocoupler dear
Hello dear, Its very nice video, how can I add energy meter in the proteus simulation? Thank you
No need to add energy meter. Just pulse generator and use that like energy meter.
hello sir !!! i have downloaded the codes but they are not working.can you help me? i am using GSM A6
Please try using GSM 300 aur GSM 900 module
Sir please do video about how to connect connections from one material to another material
Sure ...... please whats up on the given number..... you will get personalized video of this project
Sir.....
Please do a video about how to give connections.......
Sure it's on the way ..... or whats up me for it if you want it on urgent basis
Sir in which software you have done this simulation
This simulation for this project is done in proteus software
sir can you share schematic arrangement of prepaid energy meter using arduino & gsm because i can not find the energy meter in proteus
mail or call us
@Kizibo kimayaro have you arrived a solution for this problem
Informative video sir.
Sir, Can u share a program code for load control OR load management using wifi module (NodeMCU).
sure please send us a mail
Please send me code
How you read values from the electricity meter?
The reading is taken by the energy metre but I read them through optocoupler
Sir, How did you interfacing energy meter with ardiuno, which pin/port you used of energy meter
where is the link for code
i am getting finding module error on both sim card as well as adapter
Your GSM Modem may be faulty or not connected properly ....
can i know which energy meter is used
It's simple energy meter which can cost you only 220 INR
Sir , Big fan please do reply.
What's your question
working on this project ,, wvrything is workinng fine but the issue is theres no increment in balance . please someone help
is that a problem in EEPROM ? Or with the decode message ?
Decode message problem .... use proper gsm modem .... with proper signal strengh ... and recharge like - #50*
Which relay you used
Its a simple 12V ( 10 rupees price only ) Electromechanical relay ... If load is heavy then you can go for some high power relays
@@The.Innovative.Indian dear kindly guadr us which types of meter use
sir how to add energy meter in proteus can u please tell ?
You can use pulse generator to show the energy meter.... because meter is also generating pulses
Hello bro video clarity is bad is not helpfull for us because my project about this so pls upload or send another copy I am so thankful to you bro
Ok just drop your email id on what's up number in the video
Actually in this project I used Arduino nano,so I amnot able to write the code. so this code will be changed for Arduino nano?
yes its very easy watch some youtube video for this ..... main difference is only that you need to select a different board when uploading the code to the nano board ...
thank you very much sir
i tried this project
i got a problem receiving coding not working plz help me sir
specify the problem you are facing or make a call on the given number
Did you sucessfully compeleted it??
nice
Thanks a lot dear ..
@@The.Innovative.IndianBro I really like this project...And how much cost it will take to make it.
Is it available in your store to buy complete project????
Sir....
Requesting PPT about this project
please contact at circuitsbazaar.com you will get the mail instantly
How to make a phone call to 5 phone numbers using gsm module
simply you need to add 5 contact number in the programming
Sir can i get proteus simulation
Ofcourse please visit the Circuits bazaar web
Sir how is the balance thing happening.. Are vo using any smart card
No .... here i have used the SIM Card for that but in future you can use wallet like paytm or you can create your own wallet for that
Hh
Does this connect to any prepaid power meter??
Hi sir thank you so much for giving code and schematic but sir can i use arduino nano for this project.
Why because the cost of arduino uno is somewhat expensive sir that's why I'm asking this question sir
Hii karthik can you send me the code
Do you have the working code?
@@akashmaharana1301 i don't have the code, because of that only i suggested the website sir
Yeah sure you can use arduino Nano as well to program this circuit
Sir i really need to know about the components.. I m a starter ..can u share dat?
How can I help you? you can contact on the number in the video
@@The.Innovative.Indian ok i will call u then thank u
Awesome Bro,..
Please help me too.
I want this project for my FYP
sure ... what help you want....
Hello sir
I need to u help in making this project . Plz if u c this text give a call 9742170350
1:16
What is this?
I can not hear you clearly
This is optocoupler and optocoupler is used to isolate 1 electrical section to another electrical section but still they connect with each other through light
Bro you have PPT of this project ?
Yes we can provide all the data regarding this project which will help you to complete your thesis or report
Could you please send documentation of this project
In discription
Give Reply to my comment
Please contact on the number given in the video
Put the ratings and price and connection video plz
Contact me at the number given on circuitsbazaar.com ... i'll help you out
Please send the complete procedure and components detail
Sir I want to simulate this in Proteus ... Code is compiled but want to know the components used for simulation ..I mailed your mail id
please contact the number given in the video
Thnx for replying but sir It would be great if you could mail me on pawanchimote1997@gmail.com
How to add energy meter in this circuit
Follow the circuit diagram given in the description
Which software you are using
Sir dose it have a simulation video?
yes you can simulate it in proteus
Circuits Bazaar Please Sir, how can I get and use the Energy Meter that you used in software simulation? Dose it have library or we will construct it?😅
sir how can i add energy meter library to proteus
protues Me Mat Karo Usme Time Kharab Hoga Physical Try Karo
Hello sir i tried to make this project.. i have almost done but when I installed code it’s not working
What actually is output ?
which energymeter have you used here ? to which terminal does the optocoupler is connected in energymeter?
@@rahulbarange1025 hello
sir our system shows fixed balance of 255 and there is low balance in the system
charge it by adding more balance by sending messsage
sir i have already recharged it by 100 but it shows only 255 balance
sir our problem is not solved
sir please send me a code of GSM to sence balance and send message i have already used this code but did not work
Sir I want to do the programming details please help me
please leave us a mail
shivamsingh44477@Gmail.com
Should I get circuit diagram of this project?
Go in the video description .... its given over there with download link ... please from there
Hi..Can i get the simulation for this project.Thank you
sure mail me on circuitsbazaar@gmail.com and tell in which software you want it ...
can i get simulation of ur project?
Spdt relay required or not
Yes it is required to control the load ...... when you will be out of balance then electricity of the house will be shutdown using that relay ...
Sir is project ki coding mil skti hai kya??
Yes please call the number given in the video
Give me a No. Sir
please update the code :/
sir I want full explanation of this project
sure make a call on 8684884488
Can you share with proper coutry code or if your problem was solved then can you share with me
sir please send simulation this project kindly sir
Sir please send me project report
Sir i want this project
ok you can contact on the number given in the video
Sir Should I get circuit diagram ?
Go in the video description .... its given over there with download link ... please download
from there
sir can you tell the full component list for this project
Day after tomorrow i am gonna upload another video.....
@@The.Innovative.Indian okay thank you sir
Sir I am waiting for your video @circuits bazaar
Sir can you please share the procedure and components which is you used in here.
POT KOUN SE EQUIPMENT H
POT is required to control the Contrast of the LCD
amount kitna lagega
How is the recharge done? I mean like ,,if we just punch the random amount ...How would the utility know of it
5800
Apne Diya hai vo code me kucha error dikha rahi hai
What error you are talking about... Plz share screen shot
Sketch uses 9154 bytes (28%) of program storage space. Maximum is 32256 bytes.
Global variables use 1012 bytes (49%) of dynamic memory, leaving 1036 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xba
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xba
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xba
avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xba
avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xba
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xba
avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xba
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xba Problem uploading to board. See support.arduino.cc/hc/en-us/sections/360003198300 for suggestions.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xba
avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xba
plz send me its circuit diagram
Go in the video description .... its given over there with download link ... please from there
Can u send the load name
it is 1000 watt heater which people use to cook or in the winter season...
PLZ
Send Coding
Go in the video description .... its given over there with download link ... please from there
Hindi m video bnao ye wali
Ok bro i'll try
Hindi m bolo
Ok bro i will another video
sir almost project is run but phone did not send and receive message . and i use 900A mini 3.8.2 module so pls tell about problem.
Please check your GSM Modem ... there may be fault over there
Same problem here
How did you insert energy meter in pproteus bro