Esté loco se salto toda la parte del limado, lijado y entorchado... Todo gracias al bendito papel engomado.... 😳✨ El resultado fue como habrír un regalo.... Te pasaste quedo totalmente aplastada la joya.... Felicitaciones 👍🏽✨😬
I always wondered how that bracelet was made. Very cool! You do beautiful work, I like that it's solid and not hollow like the cheap junk they sell in some stores.
this is really nice. I really like your ring videos as well, they're really helpful with learning techniques and to see how the professionals do it. So yeah, thanks!
I love your work. I'm now a subscriber, I'm 13 and from Australia and started making silver rings from silver coins. I've made about 20 now and they look like I bought them from a store. Lol but great work I love how you use a macro lends because your work is so small and precise. Love it
Good evening, congratulations on your beautiful work, I'm just starting out and I want to make one like this, so please tell me the diameter of the shaft after passing the fair. and the diameter of the shaft to make the elis. thank you very much for your attention
My mom wants to design her own sterling silver bracelet! You can do it mom! Happy birthday!Thank you for sharing your video. Very interesting! Going to need the tools or a creator to help her with the design she has in her mind.
Beautiful bracelet and workmanship! May I ask what a couple of the machines you used are called? Specifically the one pulling the items through the drawplate, and the one that hammered the links after you taped it down and before you put it in the rolling mill?
Thank you. I do not remember the technical name, but if you send a photo Mario Di Maio or Luigi Dal Trozzo, who are two goldsmiths wholesalers will give you all the information
I like that pully system used at 1 min mark, want one. Watched a video where every step of a process used had advertisements on the equipment. was used for a dagger or something like that.
Hola buenos días, muy buen vídeo y trabajo no sabia como hacerla, gracias por compartir tus conocimientos, quisiera preguntar varias cosas, el calibre es 2.4 ok y el perno en la que enrollas el alambre que medida tiene? veo que al soldar hierve el liquido que usas y la soldadura corre muy bien cual es o como se prepara? siempre es necesario que sobre un poco la soldadura en cada argolla... Para que es? te agradecería. Un abrazo.
thank you for one more awesome video, i really like them, i've been following for years. just, In my opinion, you should switch some of the music, that has been the same.
Any advice for getting it to lay flat? All of my chains twist and dont lay super flat like yours, with curb and cuban chains I get that you just pull back harder while twisting but how would I do it for this?
I do not remember, however, the spindle must have a diameter proportional to the diameter of the wire you use. The rings before being bent must touch each other, the more united they are, the better the finished work will come
I think you need more tape on those needle nose pliers (kidding). Those are some amazing tools you have, some heavy equipment from days gone by. Would love to have some of those machines for making jewelry for sure.
Bhai laddu Chandi me itlian Chandi me Kiya farq hota hai aur best Chandi in dono me se konsi rahegi aur hame konsi kharid nii chahiye plz plz bataiye reply me
The crushing of the rings did not prevent the movement of the chain. The size of the thread and the diameter of the rings is important, if the rings remain too space, they do not remain in their place
Saludos buen trabajo , gracias por compartir , la gente pide medidas , pero creo que uno debe de imaginarse , mientras mas grueso es el hilo para trabajar se aprecia mucho mejor , a partir de 2mm de grueso se ve bien , para hacer los eslabones un perno de medida 8 mm . el cierre o seguro se veria mejor de caja.
I love your work, I tried this flattening method with copper but it seemed to make it very weak where they were linked and the most flat. does that just happen with certain metals? or be more careful when flattening?
Hi Thanks for the great video. I`m a new subscriber, so I want to know if you have videos about the materials and tools you use. Like what is the paste or cream substance you use for the final polishing? It gives an awesome finish :)
Thank you . I've never done videos on the tools I use, because they are the ones you see in the videos, they are easily found in the online sales catalogs of wholesalers in the industry, such as LEGORGROUP, MARIO DI MAIO, LUIGI DAL TROZZO. To polish use as a gouache paste: ecommerce.turricchia.it/Sassomarcio-Menzerna-PP136, and as final dough I use the paste of DIALUX
So beautiful. It's more beautiful when you get to see how it's crafted.
Thank you.
Wow! I never thought of drawing a chain through a draw plate. Thanks!
Wow ,que belleza .Trabajo hermoso y delicado , es mi facinacion ver las bellas piezas que realizas. Gracias
gracias
So inspirational. I'm in my mid 40s and have just started my journey into making jewellery. Thanks for the videos.
thank you very much
Oui moi aussi 😊
Esté loco se salto toda la parte del limado, lijado y entorchado... Todo gracias al bendito papel engomado.... 😳✨ El resultado fue como habrír un regalo.... Te pasaste quedo totalmente aplastada la joya.... Felicitaciones 👍🏽✨😬
Great video, thanks. Have to say I was on the edge of my seat watching you holding the coiled metal in your hand and sawing to create the links!
Thank you
I have a new found respect for you, sir. What an art, craft. I loved your music as well. Thanks for sharing.
thank you
I've seen so many things you have made and I never tire of watching your skill, Sir
thanks a lot
I always wondered how that bracelet was made. Very cool! You do beautiful work, I like that it's solid and not hollow like the cheap junk they sell in some stores.
thank you
Complimenti Maestro. Molto interessante soprattutto la parte del nastro adesivo e del conseguente appiattimento della maglia. Molto bene.
Grazie.
Amazing this is the first time I get to see how chains are made, beautiful job. So much skill! I'm curious how many links is too many to flatten?
this is really nice. I really like your ring videos as well, they're really helpful with learning techniques and to see how the professionals do it. So yeah, thanks!
thank you
Thanks for showing yr craft and skills no one can take away yr skills
thank you
I must say I truly enjoy your work!
thank you
Thank you for your videos. You are amazing its always great to watch.
Thank you
Mais um excelente trabalho joia belíssima. parabéns e até a próxima.
obrigado
I love your work. I'm now a subscriber, I'm 13 and from Australia and started making silver rings from silver coins. I've made about 20 now and they look like I bought them from a store. Lol but great work I love how you use a macro lends because your work is so small and precise. Love it
Thank a lot
and me i want some one how alotof money i want to introduce in african
Sick man, i’m 13 from aus too
You should become a silver/gold smith my man, become a jeweller and make your own jewellery!
Good evening, congratulations on your beautiful work, I'm just starting out and I want to make one like this, so please tell me the diameter of the shaft after passing the fair. and the diameter of the shaft to make the elis. thank you very much for your attention
great tutorial, great looking bracelet
thanks
Thank you @scaffoal because of you I've been able to make bracelets like yours for my friends and their wives!
thanks
Que interessante a fabricação dessa pulseira. Deve ser por isso o valor alto, da muito trabalho !!!
obrigado
nice work same i do in my channel
Never knew how much work these involved , amazing work sir!
thank you very much!
I really liked it in round link form I've been trying to find a bracelet in round link form been a struggle finding one great video
thank you
My mom wants to design her own sterling silver bracelet! You can do it mom! Happy birthday!Thank you for sharing your video. Very interesting! Going to need the tools or a creator to help her with the design she has in her mind.
Thanks
what think on my idea i want some sponsor for make ring from silver or golden plz help me to get spons
hello guy am in rwanda my name furaha and iwant to help me in may project to make this ring from golden i want 500$ MAY HELP MEPLZ LISTEN
Luke W jkoo
Luke W hiiiii
Amazing work you are always Good.
Thanks
Beautiful bracelet and workmanship!
May I ask what a couple of the machines you used are called? Specifically the one pulling the items through the drawplate, and the one that hammered the links after you taped it down and before you put it in the rolling mill?
Thank you. I do not remember the technical name, but if you send a photo Mario Di Maio or Luigi Dal Trozzo, who are two goldsmiths wholesalers will give you all the information
Grazie, @@scaffoal. I think I found out about one from another video: I think it's called a draw bench.
How would I send something to Mario or Luigi?
I like that pully system used at 1 min mark, want one.
Watched a video where every step of a process used had advertisements on the equipment.
was used for a dagger or something like that.
thank you
Looks like a mariner without the middle bars in the links. This method is a lot faster than diamond cutting links
Arte milenar , muito talento e profissionalismo
obrigado
it was a job of exceptional quality Congratulations
thank you
Wow, really enjoyed your video. thanks!
thank you
More brilliance from a true master of his craft. Thank you, sir.
thanks
very nice..show some more fansy ornaments... thankyou.
really cool I would like a necklace made to match the bracelet
Hola buenos días, muy buen vídeo y trabajo no sabia como hacerla, gracias por compartir tus conocimientos, quisiera preguntar varias cosas, el calibre es 2.4 ok y el perno en la que enrollas el alambre que medida tiene? veo que al soldar hierve el liquido que usas y la soldadura corre muy bien cual es o como se prepara? siempre es necesario que sobre un poco la soldadura en cada argolla... Para que es? te agradecería.
Un abrazo.
kra eu sou muito seu fã, seus trabalhos são perfeitos!!! um dia ainda vou possuir uma de suas jóias!!! abraço 👍👍👍
Obrigado, Atenciosamente
😁👍
After going through the rollers, it needed a sanding. After polishing you can see imperfections in the metal which makes it look less quality
I m yours fan . U r great sir. I follow u
thank you so much
Great vid! Tx. Why is it a gourmette instead of a Cuban? And what is the name of the tool that flattens and stretches it. Thank you.
really superb 👍👍☝...
Thanks
Very good work!! I got a whole playlist called “Jewelry and Fashion” where i have my whole solid silver and gold jewelry collection!
thanks
Its amazing work my brother also made this type of bracelate
thanks
thank you for one more awesome video, i really like them, i've been following for years.
just, In my opinion, you should switch some of the music, that has been the same.
LINDO BRACELETE !!! MUITO BOM PARABÉNS !!!
Thanks
Any advice for getting it to lay flat? All of my chains twist and dont lay super flat like yours, with curb and cuban chains I get that you just pull back harder while twisting but how would I do it for this?
If you can't fold them, a solution to make them stay level and weld the links two by two.
Nice silver jewellery chain.
Thank you
No filing! Super idea! May I am what mm the wire is and the mm of the mandrel you used?
I do not remember, however, the spindle must have a diameter proportional to the diameter of the wire you use. The rings before being bent must touch each other, the more united they are, the better the finished work will come
@@scaffoal Thanks!!
Wow nice mst say thanks 4 sharing I always wondered how they got the flat curves in chain n how it is mold thanks 2u nw I knw I'm at ease...God bless
thank you
Beautiful chain and great job! It deserved a more robust closure. 🇧🇷👍🏻
I think you need more tape on those needle nose pliers (kidding). Those are some amazing tools you have, some heavy equipment from days gone by. Would love to have some of those machines for making jewelry for sure.
thanks
Superb your work
thanks a lot
the work is amzing, the video is nice but the music ... let the backgruond sound of your shop ... is better than anything!
Cool, I have this one in gold from an old bag, but use it for my pants
Great job
Big respect for Morocco
Thank you
A very interesting video, thanks for sharing the process 👍🏼😊
thank you
supar model
Marc’s Fx
genius. I always wondered how those were made.
thank you
💛 Quight happy you shared the video
Belo trabalho Mestre, mim passa o contato de onde comprar as fieiras italianas? Ouvi falar que as fieiras italianas são as melhores..
obrigado, Três grandes negociantes são Luigi Dal Trozzo, Mario Di Maio, Legorgroup. Todos os três têm o site online com catálogos
Bhai laddu Chandi me itlian Chandi me Kiya farq hota hai aur best Chandi in dono me se konsi rahegi aur hame konsi kharid nii chahiye plz plz bataiye reply me
good morning! I would like to help you, but I didn't understand what is meant by chandi; Excuse me
Learned a few tricks today on here Scaff...thanks!
Thank you
jim bettridge uj
hello my name furah am in rwanda i like to do this project of ring in my country may give sponsor
jim bettridge j
Trong
Bosse
This Is Like MAGIC !
thank you
Is that a Nylon brush you are polishing with or goat hair? And do you use Tripoli on it? Thanks
The scratch brushes are in bristle, the polish brush is made of cotton
You should have twisted the chain before compressing it at 7:15 . This makes wearing it more comfortable.
thanks
Is this how you would make a flexible link ring? I've seen them filed after flattening?
The crushing of the rings did not prevent the movement of the chain. The size of the thread and the diameter of the rings is important, if the rings remain too space, they do not remain in their place
@@scaffoal 8...
Ye chandi ka h kya
Cool Video, I learned some stuff quick.
thank you
Всё просто и красиво...есть чему поучиться....ай лавит😎
What kind of tape did you use before tapping to cover your silver? Thanks and awesome video
I used carpeting paper tape
Muito é uma verdadeira obra-prima👏👏👏👏👏👏
Wow, very nice. Luvit. ♥
Thx for showing...
thank you
Ye Chen ka kya wet aur kya ret hai
Name of the tools you using please
a query as it is called the tool that you use to cut the trensa and what measures the sheet has
to cut use a normal hacksaw by goldsmith
Saludos buen trabajo , gracias por compartir , la gente pide medidas , pero creo que uno debe de imaginarse , mientras mas grueso es el hilo para trabajar se aprecia mucho mejor , a partir de 2mm de grueso se ve bien , para hacer los eslabones un perno de medida 8 mm . el cierre o seguro se veria mejor de caja.
ok, gracias
You are a sly one!How wisely you came up with scotch tape ... Brilliant!!
. . . От Ты хитрец ! Как мудро с скотчем придумал... Гениально!!!
Как всегда супер классно Спасибо! можно вопрос где можно купить палировачные щётки Спасибо
Спасибо!
Awesome Work. my friend.
thanks
thankyou for the videos very interesting to watch
I love your work, I tried this flattening method with copper but it seemed to make it very weak where they were linked and the most flat. does that just happen with certain metals? or be more careful when flattening?
vermili0n copper work hardens and becomes very brittle, you can anneal it to relieve it
Can you please tell me what formula of material you use to make the joint for silver thanks
I use soldering silver, I find it already prepared by the wholesalers I buy from.
How many rings +/- do you need to do and 20” chain?
Bravo! Quick question, if I follow this process will it hang straight if I lick it Up? Can I apply this process to the cuban?
Yes, be careful that the rings need to be very tight at the beginning to stay in place
scaffoal at the beginning when I place them on the tape? I want to try this in gold
Do you sell this exact bracelet? Also what is the American dollar price on the bracelet? For say a 8 inch bracelet
you can contact scaffoal@oro-diamanti.it
Buen Trabajo,What gauge is the wire you used?
gracias, about two millimeters
How can i keep my silver mirror shiny?
Awesome man!!! I don't know I can use a rolling mill to do this.
he got the tip from me
Thanks
太棒了，就是要买齐这些设备好像不太容易，不知道有没有小型的简易设备的。
谢谢
Assalamu Alaikum kya haal hai thik hai yaar ek mujhe ye Angoothi chahiye kitne rupay ki hai please try Sydney hai ya leni hai ek baat
Chow cara muito bom sou professora também , você dá muita dicas boa pra mim você e muito bom rsrsr
obrigado
Very nice video..I also have a diamond jewellery manufacturing in India..
thanks
Nice workmanship love it!
thanks
I would like a 24 inch version of this for a chain how much would that cost me
can cost around 400 euros
Excellence work bro.
thank you
omg the use of tape ..great thank you.. beautiful product
thank you
What is the machine called that spirals around the metal rod?
я просто балдею , красавчик!!
спасибо
scaffoal как с тобой связатца, хочу показать плетение цепи
Impressionante o resultado, que perfeição!
Smart way to make it - no filing!
Hi
Thanks for the great video.
I`m a new subscriber, so I want to know if you have videos about the materials and tools you use.
Like what is the paste or cream substance you use for the final polishing?
It gives an awesome finish :)
Thank you . I've never done videos on the tools I use, because they are the ones you see in the videos, they are easily found in the online sales catalogs of wholesalers in the industry, such as LEGORGROUP, MARIO DI MAIO, LUIGI
DAL TROZZO. To polish use as a gouache paste: ecommerce.turricchia.it/Sassomarcio-Menzerna-PP136, and as final dough I use the paste of DIALUX
Thanks a lot :) All the best and God bless you ...