HEMI REBUILD PART 1 - TORX GARAGE
Вставка
- Опубліковано 15 лют 2019
- Today, we start the rebuild on the HEMI engine, starting with camshaft fitment and crankshaft installation as well as engine building best practices. Part 2 will be added soon.
- Авто та транспорт
Cool Videos! Make more for our viewing enjoyment! 🤠🇺🇸
THANK YOU FOR THIS IN DEPTH VIDEO YOU MADE IT SEEM SO EASY I HABE TO REBUILD MY 6.4 HEMI AND YOU GAVE ME ALL THE CONFIDENCE I NEEDED
How did it go?
@@kingkills9685 I ENDED UP FINDIN A MOTOR WITH 24K MILES ON IT DECIDED TO WAIT ON MY REBUILD
That you strip your motor down to replace everything on your hemi where can I find cylinder head dowels and oil galley plugs? Looking to bond with my motor as I want to build it from the ground up using the 6.4 BGE /Hellcat short block
Ty
I'm in the process of this now and i made sure to polish my crank before putting it back in. Also the Rings i ordered from Hastings are out of spec. The Ring gap for the top ring is around 0.045 mm the factory spec is 0.23mm - 0.038mm. The original 200,000 mile rings are with in spec when i checked them. They are 0.038mm. Clegg Engine where i got the kit from wants me to measure every bore and email it to them so they can ship me the correct rings. Have you had this issue?
Awesome video, thank you. Question; why wouldn't you have the crank machined prior to assembly?
In this case, bearing surfaces were fine
Torx Garage should have at least had it polished and washed.
Did you balance. Any of the rotating assembly. Or use plastiguage?
Did you use a new or use cam?
What's the best rebuild kit to purchase?
Whats the specs on the upgraded cam
Did the crank pully have keyway or woodruff key insert
Most aftermarket cranks and balancers use a key. The stock crank and balancer are press fit - no key necessary.
Why didn’t you put the sprocket bolts back in the front of the camshaft to make it easier to install rather than beating the shit out of the bearings
7:40 “sometimes that happens...........” HEARD IT HERE FIRST FOLKS😂😂
Thrust bearing
Missed on film. Was trying to figure out why my crank had so much play 😂 guess I didn’t add that to it.
Is it a 6.1L 6.4L ?
JUST SOME CANADIAN GUY it’s a 5.7 engine
You completely forgot to install your thrust bearings on the centre cap?
Yeah in the video I did. Checking thrust after, it was obvious. Had to redo it.
How and where does the thrust washer install?? No videos show
Whats the price cost to rebuild a hemi
Stock or modified? Doing it yourself or paying someone else to do it? How much of your hemi is reusable?
@@Kettenhund75 looking for someone to rebuild it stock. It has 140k on it. (6.1 hemi)
How not to build a Hemi 😂
What did he do wrong ?
??? If you're such an expert why are you in here???
Saul Cruz he forgot to insert thrust bearings on this video. Main cap fasteners CAN’T be reused. When rebuilding an engine the camshaft is one of the last components to insert.
Sadboy cali No need to get upset. You suck at building engines buddy. I was here cus I wanted a quick laugh 😂
Canna Blood he probably nicked the cam bearings lol now she’s going to have hydraulic roller issues 😂
So um do we not check tolerances of the bearings and crank journals anymore ? You should always check the tolerances of your crank and bearings and same with connecting rods and the crank journals. not enough and you will destroy your motor too much and same thing. Please for the love of god if your going to show people how to you need to include all the steps and tolerance is extremely important