Great job on the video. People do not realize how much skilled labor is required. I just finished RC glider build from a nice kit. It took about 40 hours of work before flight.
@@MoritzWeller time to complete is highly variable. depends on kit complexity, quality, and builder experience. if you are just starting out start with a simple quality kit and you will likely be able to complete in under 10 hours or so. good luck to everyone
The provided plans look absolutely stunning! Even as a beginner, I had no problems making sense of what I need for this build. Thanks so much for sharing! Can you please provide some information on the Carbon Fiber Bow Arrows you are using? I see there are several types available on Ebay. Thanks!
Great video and lovely build. I am curious though - why did you hinge your ailerons at the top of the wing (and not the bottom of the wing). Hinging at the bottom would allow for much more aileron travel, as you only need a couple MM of reflex during launch/speed and could use over 45 degrees down during landing.
From what I knew about aerodynamics, any unevenness on the top rear part of the wing would have much greater negative effect than on the bottom side, as they can provoke earlier flow separation and thus earlier stall on low speeds or high angles of attack. Although I don’t know what is actual best practice of aileron mounting on DLG wings. I found this video while looking for examples how this should be done
@@ВоваИванов-г5с Привет. Так приятно видеть ваш комментарий, я уже волновался, что вы не услышите от вас. Теперь мое сердце счастливо. Комментируйте чаще, я знаю, что все хорошо, спасибо.
Hi Marko. Thanks for this great design. I will set up a workshop in our makerspace to build 4 or 5 with a group. I have a question about the aileron servos which are obviously in the fuselage. how did you put them? the inner hollow part is just 10mm which does not allow to mount the servos side by side…
Any chance of kitting this, or licensing to a kit producer. A 1.5m woody DLG would be perfect for beginners or builders who don’t want the expenditures of bagged layups. Perhaps collab with Josh Finn at J&H Aerospace?
Hello Very interesting comment. I will not produce them myself. The drawings are 100% mine made and available for free on both Grabcad and Thingivers. You can take them and use them as you wish. All I want you to do is share a video with the drawings of how I built and how i flew it. Anyway, many thanks for the offer.
Hi Marko, this bird is so beautiful, I decided to build it as well, I'm about half way. What density Balsa did you use? I'm not getting near those weight readings you show, with the Balsa I got for it.
Hello Marko great idea and work. Have you thought about adapting the wings from this dlg to dlg with an electric motor where you made the wings in composite? The wing chord could be reduced leaving a span of 1500mm what do you think?. Of course, the printed fusellage unchanged.
Yeah, it's really hard to get the CG right on this plane. Stabilizers must be extremely light. But try to put the extra weight in the nose, if you can't, put it out of the fuselage and decorate it with balsa.
Hi, great DLG. What is the machine you use to cut out the ribs, is it a laser on a 2D router setup? Did you draught it in Solidworks and then do slices to get the profile at each rib station?
Dear Marko, Thank you very much for sharing your design and production of your beautiful DLG. I had two questions and that is: 1. Are you sure the dihedral angle of the wings is 1.5 degrees? 2. How much weight did you use for the front of the nose? good luck
Hello Mr attar. I think that's right, but if you want to change that, it's very easy to grind the stabilizer base. You can set the angle as you like best. The nose has about 25g of extra weight. It is very important to get a horizontal and vertical stabilizer very light, it is very important
Do not overdo it, a wall thickness of 0.5 mm is sufficient. The tube itself would be good tapered. In the video rod was 7.6mm. A smaller diameter is not recommended, it bends too much
Преобразовал ваш фаил в корел для лазерной резки. Передние и задние кромки из карбона 3,5 мм? Стрелы пока такого диаметра не нашел, наверное подберу другие и отредактирую отверстия в макете на порезку. Есть дефекты в корел в передних кромках нервюр, какие-то черточки, уберу их. Какой клей применяете. Знаю только космофен из подходящих. Бальза есть в интернет магазинах, кроме 5 мм, но думаю еще найду. Впереди кроме серв, приемника и аккумулятора ест груз? Модель понравилась. Хочу повторить. Какие шарниры используются у элеронов и руля высоты? Какой используете рубанок, такой он острый. Супер. Все нравится.
@@MarkoRoolaid ок. Спасибо. Я так уже решил. Материал уже заказан в интернет магазине. Последний раз делал модель в 1990 году. Спасибо вам за ваш труд. Да. Я. Сам разберусь. Сделал же сам полностью 3Д принер с областью печати 300х300х300 )))
Felicidades en un bonito modelo, tengo el talon igual pequeño es de acrobacia, este me gustó es sencillo de construir, si no se puede enviar aquí donde vivo, el kit le rogaría qué publique un pequeño plano con las medidas y el perfil infinitamente agradecidos, un aeromodelista más.
@@MarkoRoolaid Understood. Thanks. But the links to the receiver don't work for you. And how to make delivery to Russia with HobbyKing. Well, or I think to buy on Ali. I worked only with lavsan, in my youth. And what kind of film do you use.
Hi, just arranged with a friend of mine to cut all the parts for me, I love my building and this model will give me my first taster of f3k, looking forward to getting the parts Thanks
Shouldn't both carbon tube define the profile of the wing? Real planes have a stressed surface! I guess it is just a question of taste, but like wood panels on the leading edge instead of this ripped skeleton.
That build was so clean it sanitized my entire apartment 😎
Great job on the video. People do not realize how much skilled labor is required. I just finished RC glider build from a nice kit. It took about 40 hours of work before flight.
Bro I was planning to build one... Can you just help me out with it?
as someone interested in the hobby, definitely not what i wanted to hear / read! 🤣👌
@@MoritzWeller time to complete is highly variable. depends on kit complexity, quality, and builder experience. if you are just starting out start with a simple quality kit and you will likely be able to complete in under 10 hours or so. good luck to everyone
Nice work. I´d love to see it flying.
I love the fact you used old arrow shafts, I have a few laying around that need to be used this way.
I have used bow arrows a lot in airplane construction. Very good and light material
The provided plans look absolutely stunning! Even as a beginner, I had no problems making sense of what I need for this build. Thanks so much for sharing! Can you please provide some information on the Carbon Fiber Bow Arrows you are using? I see there are several types available on Ebay. Thanks!
Hi, I used Bow arrow 32´´ SP 350 D-7.6mm
@@MarkoRoolaid thank you!
Excellent build...I think I will build one too, but modified for slope. Great looking model.
Great video and lovely build. I am curious though - why did you hinge your ailerons at the top of the wing (and not the bottom of the wing). Hinging at the bottom would allow for much more aileron travel, as you only need a couple MM of reflex during launch/speed and could use over 45 degrees down during landing.
Your story about the hinges is absolutely right. I made it to looks better, but the travel of the flaps is really limited
From what I knew about aerodynamics, any unevenness on the top rear part of the wing would have much greater negative effect than on the bottom side, as they can provoke earlier flow separation and thus earlier stall on low speeds or high angles of attack.
Although I don’t know what is actual best practice of aileron mounting on DLG wings. I found this video while looking for examples how this should be done
Nice Clean Design and Build-Thank you
เป็นผลงานที่สุดยอดมาก
ขอขอบคุณ. ขอบคุณมาก
great work mark I think you will inspire a lot of people to build again including me
Thank you very much
@@MarkoRoolaid маленький
@@ВоваИванов-г5с Привет. Так приятно видеть ваш комментарий, я уже волновался, что вы не услышите от вас. Теперь мое сердце счастливо. Комментируйте чаще, я знаю, что все хорошо, спасибо.
@@MarkoRoolaid тебе матрица 3 д крыла нужна?
Excellent video, many good ideas demonstrated.
✊✊✊✊ looks beautiful, excellent job
thank you
beautiful great work
Very nice …… even some NIN included 😉
Thank you
Great job as always. Tidy build.
Thank you
Hi Marko. Thanks for this great design. I will set up a workshop in our makerspace to build 4 or 5 with a group. I have a question about the aileron servos which are obviously in the fuselage. how did you put them? the inner hollow part is just 10mm which does not allow to mount the servos side by side…
The electronics installation in this aircraft is really complex. If possible, make the fuselage a little wider, installation much easier
Any chance of kitting this, or licensing to a kit producer. A 1.5m woody DLG would be perfect for beginners or builders who don’t want the expenditures of bagged layups.
Perhaps collab with Josh Finn at J&H Aerospace?
Hello
Very interesting comment. I will not produce them myself. The drawings are 100% mine made and available for free on both Grabcad and Thingivers. You can take them and use them as you wish. All I want you to do is share a video with the drawings of how I built and how i flew it. Anyway, many thanks for the offer.
@@MarkoRoolaid No way you'd sell a kit for profit?
How do you adjust the center of gravity? Everything looks like a pretty tight fit.
Hi Marko, this bird is so beautiful, I decided to build it as well, I'm about half way.
What density Balsa did you use? I'm not getting near those weight readings you show, with the Balsa I got for it.
Hi, I don't know the exact density, but as light as possible. Every gram counts :)
Unfortunately we don't get to choose here, will see how it turns out. Thanks.
Amazing as always, great work.
thanks
You are using carbon arrow as the spar... hmmmm i got many carbon arrow that already broken.... i should store it the so i can build glider 😄😄😄
Amazing work!
thank you
Hello Marko great idea and work. Have you thought about adapting the wings from this dlg to dlg with an electric motor where you made the wings in composite? The wing chord could be reduced leaving a span of 1500mm what do you think?. Of course, the printed fusellage unchanged.
Changes can be made freely. It is not a competition plane, so any solution is suitable for the hobby
Beautiful! Thank you for the files😎
Ficou Excelente 👏👏👏👏👏🛩️🛩️🛩️👍
Obrigado. Muito obrigado
Have you got a published plan to build it? From scratch, no automated tools?
Great job. 👍 well done
thanks
😲😳😲 Perfect :) what power is your Laser ?
hi, 130w
@@MarkoRoolaid i just found your channel and i love your work :) absolutely SPOT ON :) SCRAPPY and Carbon Glider my favorite :))
What kind of glue do you use to bond carbon fiber to balsa wood. Is it thin CA glue?.
thin CA glue yees
espectacular trabajo, maravilloso me falta madera de balsa para hacer este proyecto....
Muchísimas gracias
Nice design and simple construction! What is the dihedral angle? (or how much did you lift the wing tip?) at 8:33 ? Thanks in advance.
Hi, 1.5 degrees
@@MarkoRoolaid Thanks :-)
Looks great!!!!
The perspex CoG stand looks great. Where did you get it ?
hi Ian. Stand is homemade
VERY COOL MATE.
It’s beautiful! How does it fly?
It flies beautifully and calmly.
ua-cam.com/video/X5_BYG3bzqM/v-deo.html
Thanks for sharing! Do you have any further information about the GC?
Hi Patrick. CG is 80mm from the front edge, 44%
Beautiful 😍
thanks
did he hinge the ailerons with normal small clear tape?
clear tape yes
@@MarkoRoolaid and how did you make them able to move\have space? Just keep sanding until there is room?
@@LukasLampeyes, angle it to get the desired amount of movement, clear tape, hinge top or bottom
I think I tried everything. but the center of gravity is far behind. Thanks for the guide by the way.
Yeah, it's really hard to get the CG right on this plane. Stabilizers must be extremely light. But try to put the extra weight in the nose, if you can't, put it out of the fuselage and decorate it with balsa.
@@MarkoRoolaid It takes a lot of weight. Does it make sense to shorten the tail length?
Hi, great DLG. What is the machine you use to cut out the ribs, is it a laser on a 2D router setup? Did you draught it in Solidworks and then do slices to get the profile at each rib station?
This is a CNC CO2 laser. I made the 2D drawings in Vectric Aspire
Крутая футболка
большое спасибо :):):)
Top moumoute !
Dear Marko, Thank you very much for sharing your design and production of your beautiful DLG. I had two questions and that is:
1. Are you sure the dihedral angle of the wings is 1.5 degrees?
2. How much weight did you use for the front of the nose?
good luck
Hello Mr attar. I think that's right, but if you want to change that, it's very easy to grind the stabilizer base. You can set the angle as you like best.
The nose has about 25g of extra weight. It is very important to get a horizontal and vertical stabilizer very light, it is very important
Dear marko, Thank you for your clear and useful answer. I hope you are successful and victorious in all stages of life.
Bro planning to build one.... Can you help me out with the process.... It would be really helpful.
How else, I'll still help
Hi Marko. Cool design!.
How did you do the wing joiner ? I could not see it in the video...
Hello. The tubes are connected by a small metal rod and a resin and fiberglass
Hi! How many degrees did you give of Wing dihedral?
HI, 6 degrees is good
@@MarkoRoolaidThank you! Can I also ask you the diameter of the carbon slats on the entry profile and on the exit profile?
also, is that a carbon fibre rod? How thick should i buy them
Do not overdo it, a wall thickness of 0.5 mm is sufficient.
The tube itself would be good tapered. In the video rod was 7.6mm. A smaller diameter is not recommended, it bends too much
@@MarkoRoolaid thanks! Im learning a lot here and you're helping a bunch in my process. Love from the netherlands❤️
Преобразовал ваш фаил в корел для лазерной резки. Передние и задние кромки из карбона 3,5 мм? Стрелы пока такого диаметра не нашел, наверное подберу другие и отредактирую отверстия в макете на порезку. Есть дефекты в корел в передних кромках нервюр, какие-то черточки, уберу их. Какой клей применяете. Знаю только космофен из подходящих. Бальза есть в интернет магазинах, кроме 5 мм, но думаю еще найду. Впереди кроме серв, приемника и аккумулятора ест груз? Модель понравилась. Хочу повторить. Какие шарниры используются у элеронов и руля высоты? Какой используете рубанок, такой он острый. Супер. Все нравится.
Ох, у тебя так много вопросов. Однако я считаю, что если вы сделали до этого модель самолета, то заведется легко. Просто будьте изобретательны
@@MarkoRoolaid ок. Спасибо. Я так уже решил. Материал уже заказан в интернет магазине. Последний раз делал модель в 1990 году. Спасибо вам за ваш труд. Да. Я. Сам разберусь. Сделал же сам полностью 3Д принер с областью печати 300х300х300 )))
Very nice, how did you connect the wing halves, did you use any spar or just epoxy and fiber?
Hello, short piece of metal rod and epoxy and fiber
Which airfoil did you use?
футболка огонь)
Большое спасибо
What is the name of that blue tool / knife with which you remove excess balsa so nicely?
Balsa planer www.modelheliservices.com/products/balsa-planer
@@MarkoRoolaid Wonderful. Thank you very much!
hello !
please What is this yellow material that you cover the parts of the plane with ??
Covering film
hobbyking.com/en_us/covering-film-transparent-lime-5mtr-203.html
Nice! How much does it weigh?
hi, video link ua-cam.com/video/78BLOoIswno/v-deo.html
Felicidades en un bonito modelo, tengo el talon igual pequeño es de acrobacia, este me gustó es sencillo de construir, si no se puede enviar aquí donde vivo, el kit le rogaría qué publique un pequeño plano con las medidas y el perfil infinitamente agradecidos, un aeromodelista más.
Hola.
No vendo ni envío estos aviones. Pero tengo todos los proyectos subidos.
Enlace aquí grabcad.com/marko.roolaid-1/models
"I'm sorry," I said. can you send an electronic drawing of this model?
Stunning. May I ask what battery and radio you used
All information in the comments
Servos
hobbyking.com/en_us/turnigytm-tgy-d56lv-coreless-low-voltage-ds-mg-servo-0-89kg-0-10sec-5-6g.html
Battery
hobbyking.com/en_us/rhino-750mah-1s-50c-lipo-battery-pack-w-xt30.html
Receiver
www.lindinger.at/en/rc-electronics/receivers-und-accessories/receivers/futaba-r-617fs-2-4ghz-capacity-receiver
Radio
www.futaba.com/products/hobby-radio-controls/
And thank you very much for these beautiful wishes and words
@@MarkoRoolaid Thank you so much Marko, your dedication to helping others is fantastic.
@@MarkoRoolaid May I ask approximately how much time you get in the air with the 750 mah battery.
What is the length and thickness of Carbon Fiber (smaller and bigger one)?
ohh, i don't remember exactly anymore, but look at the drawing. Anyway, the main tube of the wing is an bow arrow, 7.5x6.5mm
Hello, what kind off glue and activator do you use and where can i buy it?
Hi Richard. Glue hobbyking.com/en_us/hobbyking-super-glue-ca-50g-1-7oz-super-thin.html?queryID=3392ce6909971eafe5d0b5f5dd89e346&objectID=38007&indexName=hbk_live_products_analytics activator hobbyking.com/en_us/insta-set-ca-accelerator-2-oz.html?queryID=ae42ec780db7b7bc6d34cbebde666b08&objectID=38149&indexName=hbk_live_products_analytics
@@MarkoRoolaid thank you very much
@@MarkoRoolaid hello marco, i tried to order it but they can't send it to the netherlands. do you have an alternative?
What is OD and ID of arrow shafts?
Hi. OD 7.6mm and ID 6.5mm
What is the weight of the ribs? Can it be printed from a PLA on a 3d printer
I do not know exactly, but I believe so 10-15g. 3D printing will definitely be harder. And it is not possible to install the cover film. The ribs melt
@@MarkoRoolaid Understood. Thanks. But the links to the receiver don't work for you. And how to make delivery to Russia with HobbyKing. Well, or I think to buy on Ali. I worked only with lavsan, in my youth. And what kind of film do you use.
Hobbyking cover film
hobbyking.com/en_us/covering-film-transparent-lime-5mtr-203.html?queryID=5a60847d0a55ca136cd8f14c6b02a738&objectID=80638&indexName=hbk_live_products_analytics
"Oi! Ain't she a beauty!"
:) thanks
Hi, just arranged with a friend of mine to cut all the parts for me, I love my building and this model will give me my first taster of f3k, looking forward to getting the parts Thanks
magnificent
Hola pregunta, como hago para comprar el kit y si me lo pueden enviar a Bolivia 🇧🇴 por favor gracias.
dunch dunce dunce the beat of the bass box
That's it!
шпон из какого дерева? благодарю
Nice
thank you
What the diameter size of the spar mate?
Hi, 7.6mm
@@MarkoRoolaid thank you, is this dlg good for thermaling?
@@MarkoRoolaid do you have some thermaling video of this dlg?
@@MarkoRoolaid 7.6 means 7x6mm?
hi, 7,6x0,5mm
Зачётный планер
Shouldn't both carbon tube define the profile of the wing? Real planes have a stressed surface! I guess it is just a question of taste, but like wood panels on the leading edge instead of this ripped skeleton.
Superb !!!
thank you
What material used for skin
hi, Oracover
Does it fly 🤔
yess, video here ua-cam.com/video/X5_BYG3bzqM/v-deo.htmlsi=hbE3OIgzkw6t7sui
The trowing peg😂 never use a round one if you wanna trow some serious launches.
It wil ruin you fingers
But nice gentle hill sloper
Thank you
How to get the airfoils?
See the description, there is a link to the drawings
@@MarkoRoolaidwhat’s auw in the video?
@@coverdestroyer3572 specify the question, I don't understand
@@MarkoRoolaidthe AUW of the dlg?
@@MarkoRoolaidhe means what’s the all up weight. Everything with radio gear
how you make a hinge in aileron
Hi, tape hinge
so it's just a tape without anything else?
@@MarkoRoolaid
❤
какой вес в итоге получился
285g
Nice t-shirt, НЕТ! = NO!
NO-yess, thanks
sell the kit
NO :):):)
you SOOOO don't know ENOUGH.
My mom told me not to say anything about it till I fly’s
👍
Very fast playback andnot informative
ok thank you for your feedback
@@MarkoRoolaid dont you have any free gliding planes with no RC needed ?
Unfortunately RC toys are forbidden here
ua-cam.com/video/-JHj3DFjPXc/v-deo.html such a project. Unless it's a secret where RC planes are forbidden?
@@MarkoRoolaid Egypt 😠
very sorry to hear that. I hope that someday this world will become normal. Really sorry