Це відео не доступне.
Перепрошуємо.
Fix Your Leaking 3rd Brake Light! Silverado Sierra Ruxifey Gasket
Вставка
- Опубліковано 18 сер 2024
- Welcome back to the channel! In this video we are showing an alternative way of fixing the leaking 3rd brake light on the 2014-2019 Silverados and Sierras.
👉🏼 LINKS TO PURCHASE TOOLS & PARTS FEATURED BELOW👈🏼
#Silverado #Leaking3rdBrakeLight #Ruxifey
⚠️Try anything shown in this video at your own risk ⚠️
********************************************************************
Associated Videos
********************************************************************
How To Remove 3rd Brake Light: • IMMEDIATELY Fix This O...
********************************************************************
🔩Parts (Affiliate Links)
********************************************************************
Ruxifey Gasket: geni.us/3rdBra...
********************************************************************
Tools (Affiliate Links)
********************************************************************
******************************************
🎬 Recording equipment (Affiliate Links)
******************************************
📷 Video
Canon EOS 80D Digital SLR: geni.us/Canon-...
----------
Thank you to all of our fans and subscribers for supporting us on our journey!
FOLLOW US ON INSTAGRAM: @THESUNDAEDRIVE
CHECK OUT OUR WEBSITE & BLOG: www.thesundaedrive.com
I just want to say that I've had my 2014 Silverado for a little over a year and your videos have been invaluable. Well organized, informative and to the point. Keep up the great job Cliff and the boys! Thank you
You got it! Glad to help and appreciate that feedback!
So I bought that gasket and your right, it's thinner than the factory gasket. It failed as well. The trick is, the gasket needs to be made of good material, but it needs to be thicker than the OEM gasket. There is not enough compression in the center of the assembly to get a good seal, so the gasket needs to be thick. Just my thought.
Pro tip, use butyl tape to seal your light, not the crummy gaskets that come with the new light housing.
Hello- I have a question regarding the LED Bulbs for the rear break lights. 1) do I need a resistor 2) does the replacement LED need to be red? Thank you
what did you use to remove the silicone
You the little metal clips come with the new light?
How important are those clips to keeping the light water tight? I lost one of the clips and want to make sure that water is going to stay out
How has the gasket performed so far? Were you able to clip the metal clips in with the additional thickness of the gasket?
I was not able as the gasket seems to be too thick and the clips do not snap into place.
whats the screw size?
do not buy gaskets are too thick if you use both gaskets
What kind of glue to adhere the gasket
it comes with adhesive pre-installed :)
@@TheSundaeDrive I bought it worked like a charm👌🏾
How to fix a 2014 Chevrolet Silverado blower modulator
Haven't done that yet so not sure