Quick fix on the problem with Singer M1000 sewing machine not catching the bobbin thread. Link to buy the mini allen key www.amazon.ca/dp/B0006O4AEW?r...
THANK YOU! I bought my machine new and immediately this was an issue - imagine my frustration, especailly when I found out the nearest Singer warranty service person is over 100km away and I don't own a car! Grrr. This tutorial was exactly what I needed! You're awesome.
I just want to say thank you!!! I just bought a new but used machine. I'm a complete newbie to machines. I haven't sewn in 15 years. The first project went fine, it was a basic one. Once I was comfortable, I said I needed to do a little maintenance ie lint. Well, when I went to start the next project, I couldn't figure out why the bobbin wasn't catching. Hours of searching the internet. I came across your video, and it was the problem! You are a life saver, and I can't thank you enough. I was on the verge of tears bc I was so frustrated. 🎉🎉🎉
THANK YOU!I just bought a used singer simple and the lady who sold it did NOT tell me there were any issues, I was almost ready to toss it out the window :( Your video did the trick and now it's catching the bobbin thread!
Thanks!! Helped me fixed that issue. Singer should have your video on their website and also include instructions how to fix it in the manual as it seems to be a common one....
Wow! This is so amazingly helpful! My machine stopped working over 2 years ago after only about 2 uses and I couldn’t figure out what was wrong. I was planning on getting another one but decided to find help on UA-cam. This video really helped! I am now able to sew all my clothes that had been waiting for the last couple of years. Thank you so much for these instructions.
Thank you so much for this video. Unfortunately I loosened the allen bolts all the way and was totally unable to put them back into their holes so I've just had to take the entire casing off the machine to access that drive shaft enough to thread them back in. This is a very poorly designed machine in my opinion. Great video tho, thank you!
I neeed help, my machine is called New Ideal Athina 8855 it is nearly like yours but whenever i try to step on its brake it just makes sound but doesnot move the needle at all please show me whats wrong with it since it doesnot stitch at all
I have an issue, when I pop off the small white circle peice on the bottom of the machine. There's no visible little screw to loosen. And when I turn the nob nothing turns like in your video
I need help. I have this machine and I've had to adjust the timing a few times. This time that I adjusted the timing, the tray that my bobbin goes in keeps getting caught on the black piece that is below the presser foot. This piece seems to lift up but I don't know why it's suddenly getting caught when I'm trying to thread my machine. please someone help!
It's likely the screws haven't been loosened enough. If you're like me you're having an issue where the screws don't actually turn, and forcing the Allen wrench to turn just straps the wrench
This thing is the biggest piece of plastic junk just got it today and I'm packing it up to return edit: just bought a Singer Heavy Duty and used it 1 day before it had the same issue, the cam is coming out of alignment and not threading the bobbin thread after 1 jam. Its time to get a Brother....
THANK YOU! I bought my machine new and immediately this was an issue - imagine my frustration, especailly when I found out the nearest Singer warranty service person is over 100km away and I don't own a car! Grrr. This tutorial was exactly what I needed! You're awesome.
I just want to say thank you!!! I just bought a new but used machine. I'm a complete newbie to machines. I haven't sewn in 15 years. The first project went fine, it was a basic one. Once I was comfortable, I said I needed to do a little maintenance ie lint. Well, when I went to start the next project, I couldn't figure out why the bobbin wasn't catching. Hours of searching the internet. I came across your video, and it was the problem! You are a life saver, and I can't thank you enough. I was on the verge of tears bc I was so frustrated. 🎉🎉🎉
Im literally in the same situation 😢 this video is a god sent
THANK YOU!I just bought a used singer simple and the lady who sold it did NOT tell me there were any issues, I was almost ready to toss it out the window :( Your video did the trick and now it's catching the bobbin thread!
Ahhhhhhh thank you so much!!!! I picked up this machine for $13 at Goodwill. I almost threw it away. Then I found your video! Thank you.😊
Thanks!! Helped me fixed that issue. Singer should have your video on their website and also include instructions how to fix it in the manual as it seems to be a common one....
Thanks for help! 👍🏼Exactly the video I needed. The only video that I see that helped me with the specific problem!!!
Wow! This is so amazingly helpful! My machine stopped working over 2 years ago after only about 2 uses and I couldn’t figure out what was wrong. I was planning on getting another one but decided to find help on UA-cam. This video really helped! I am now able to sew all my clothes that had been waiting for the last couple of years. Thank you so much for these instructions.
Mine stopped working as well after two uses. I am going to try this today.
I thought he was using a screw driver in the bottom of that machine. I am still to get the appropriate key for the bottom of the sewing machine.
I got my Allen hex key today and fixed my machine 🤸🏾♀️🤸🏾♀️🤸🏾♀️🤸🏾♀️💃🏽💃🏽💃🏽💃🏽
My problem in singer M1005 solved as per your instructions.. Thank you very much .
I’m going to go buy the tools I needed this like yesturday hopefully it fixes it thank you 😊
Thanks! exactly the video I needed ❤
I can’t thank you enough, happy to report my machine’s up and running again!
Thank you so much brother, it helped a lot!!!! 👍🏼👊🏼
My machine is working again. Thanks so much!!!!
Thank you so much for this video. Unfortunately I loosened the allen bolts all the way and was totally unable to put them back into their holes so I've just had to take the entire casing off the machine to access that drive shaft enough to thread them back in. This is a very poorly designed machine in my opinion. Great video tho, thank you!
True even the registered singer tecnicians say so and advice against it's repair
Fantastic fixed problem
Thanks!! That’s so helpful.🎉
I m from Pakistan I just want this video thank you u so much u solve my problem 🤗🤗🤗🤗🤗🥰🥰🥰
this is helping but what can I use for the screw that we have to losen in the machine
I’ve got it open, I see the two screws but for the life of me I can’t loosen them- any tips y’all?
Thank you so much. Most helpful!!
Thank you so much. It worked !!!
THANK YOU SO MUCH!
You're welcome!
Loosened the two screws but the black part with catcher will not move enough to be in the right position.
have u found a solution? 😅
Thanks for the help😊
the lil bolts im suppose to loosen are super tight, and its hard for me to turn it but i believe this is the problem with my machine.
Very good video. We solved the problem at home. Thanks sir👍
This made the trick!!! I would add that there are TWO Allen screws on the bottom (I'm not a native speaker, so maybe I missed that part)
Broo this helped me SO MUCH I appropriate his video 🙇🏾♀️🙇🏾♀️🙇🏾♀️
No problem!!
@@kt7967 actually what kind of screw driver did u use all mine are either to big or too small?
Thanks a lot I was having this problem and it works ❤😅
Thank you! I fixed it and I really didn't think I would be able to.
I neeed help, my machine is called New Ideal Athina 8855 it is nearly like yours but whenever i try to step on its brake it just makes sound but doesnot move the needle at all please show me whats wrong with it since it doesnot stitch at all
How to position the bobbin wheel back again? It jumps off the place when I try to rotate the hand wheel.
I have an issue, when I pop off the small white circle peice on the bottom of the machine. There's no visible little screw to loosen. And when I turn the nob nothing turns like in your video
Very good tank for this
Gracias😊 ❤❤❤
Any tips on how to get that screw loose? It's too tight and just stripping my wrench
I'm replying very late but I used a wrench to hold the Allen key to get more torque
Thank you would help me for reasons I don't understand
i can’t get the plate up on top of the bobbin
The link to buy the alley key doesn’t open, please help! Thanks
We are trying but I can’t move the black piece that you move with your hand
I am also having the same problem.
Same here
if i lost my screwdriver key thing, what can i use?
Thank you for help
Help !
I have loosen the screws and did everything like in the videos and it is still not picking the treat underneath 😢😢
Awesome! Thank you!
It works thank you!
I need help. I have this machine and I've had to adjust the timing a few times. This time that I adjusted the timing, the tray that my bobbin goes in keeps getting caught on the black piece that is below the presser foot. This piece seems to lift up but I don't know why it's suddenly getting caught when I'm trying to thread my machine. please someone help!
I think the problem is that the tray that my bobbin goes in is moving and turning and getting caught
Have you found a solution? Same problem here@@ChristineMichelleYT
Thanks 😌
thanks
bro it keeps moving the needle when i move the black part
I am having the same problem
Any solution found ?
It's likely the screws haven't been loosened enough. If you're like me you're having an issue where the screws don't actually turn, and forcing the Allen wrench to turn just straps the wrench
@@aster6969 i took ts back bro it got annoying
My machine had a other set of them little Allen screws I tried wrong ones at first
Oh wow!!!! This worked. I had to go to the hardware store to get an Allen hex key size 2mm. Thank you so much.
Traductor en español
Mi máquina no coje el hilo de abajo
Como se pone la pieza donde va la bonina
What is the size of the ale key you used?
2 mm hex key
Whats the tool you used to loosen up the black part?
It's called a 5mm hexagonal screw driver you can get it off of Amazon
@@mystery0cean129 thank you
Thanks bro😊
Traductor en español
Cómo lo puedo buscar en español
Nope didn’t work. I tried everything and retreading machine. Still needle comes up empty. What now?
When catch is rotated, the needle goes up and down. You can't just rotate it to the needle. I need a little help.
The little allen wrench screws are so tight I can't loosen them at all
My machine it’s not working I was trying but I’d know how repair bro can solve my problems and help me
What if that didn’t work?
One of the screws at the bottom was so tight I couldn’t make it budge, so I’m not sure what to do there
La aguja queda arriba cuándo pasá el enganche
No sale poque la aguja se queda arriba cuándo pasa el enganche por ai
I fixed the timing, but now my bobbin thread is loose
Can i also apply this method to an embroidery machine?
Yes I ve got a brother v3 and brother 750
Meh im trying to find the cover i need
Por favor yo quiero el vídeo en español
My machine is not sewing remedy
We have singer M3220
Yo lo quiero en español
Fuck bro thank YOU😭
The bottom part cannot be opened. Pls help
I can’t get it either
I was struggling with an exacto knife but I grabbed a small kitchen knife and it popped right off
You need a very thin blade like a razor blade
La mía no sale l
Yo Ise todos e
this is my last resort lets see if it works brb!
Yo is
This thing is the biggest piece of plastic junk just got it today and I'm packing it up to return
edit: just bought a Singer Heavy Duty and used it 1 day before it had the same issue, the cam is coming out of alignment and not threading the bobbin thread after 1 jam. Its time to get a Brother....
Thank you so much for this🥹 I would have been absolutely lost