For the front I use a stubby screwdriver in the brake rotor vent and have it rest on the caliper so I can tighten the front all the way tight .cause you know you if not tight you will get that sound that no one likes when you hit the brake.just my tip!
I haven't put mine on yet, why would you need a spacer? And my lug nuts seems to be too small in diameter for the adapter....there's a lot of play in the holes of the adapters
Lead or brass hammers will reduce damage by a missed blow. That is the reasoning these type hammer is used/suggested with these wheels. With that said you can use a brick if you choose to, just swing true.
The purpose of using a lead hammer is because its softer then the steel knock off or key your aiming to strike bit to mention the rim itself when you miss. Therefore the lead takes the damage from the blow and not your wheel. If you take a normal hammer and strike your wheel , well I dont have to tell you what will happen and using a dead blow hammer like im using wont work jmfor just the opposite reason. The dead blow will end up being cut from the blade like key arm or fin from 2 or 3 way knock off. The hammer will fall apart. So the lead hammer is the right tool for the job. In a pinch you got to do what you got to do and deal with the outcome. Hope this helps.
So if I want them to come off like if I don't have the wrench all I gotta do is spin the side I want off the way I'm not suposto right ? Cause I don't have the wrench and no shop wants to fuck with it nor do they want to help in any damn way so if that's the case I should be able to jack it up spin it the wrong way and off it comes ? Right well we'll see how far I get with that
My front driver wheel won’t seat on to adapter. What’s your IG so I can send a picture if you can help me out.? Driver side is sitting flush. Any help much appreciated
Yes brand new wheels and tire. It seemed like everything was good. Drove the car all day yesterday but went to drive to work this morning and heard something so I parked it. Jacked it up and I can move driver side back and fourth. Can I send some pics to your email?
First of all this video is wack because you have the wrong spacer behind the adapter you need a 1.25 spacer for clearance brake caliper.those studs will brake off why you are driven .
Wack, lol . Really? Why didnt you bring up the orange plastic hammer I used or not wearing osha approved shoes. Wrong spacer is what you got outta this. TROLL!
Topic in mind, Originally the term "knock off " was indicative to hammering on or off the center bolt that held on the rim to the hub. In the mid part and beyond of the 90s decade is when "chinas or no band name" knock off rims adapted and pretty much took over the name knock offs from what the wheels are to what they are not. I'm OG so I call no brand name rims "chinas" and not knock offs. . For some reason we let it slide when newer generations changes the meaning of something that's been around for sometime. Ie. Pound symbol to hashtag. In this case I would rephrase using a synonym and not a homonym. But hey thanks for letting me know.
@@The1fromthewest im a machinists do know real term. We buy knockoff shit from China like your out of date ugly as dare I say "knock off" Chinese Daytons. Those where played out 25 years ago when I was a kid..
Yeah those tires were toast. I just picked those up that day and was only checking fitment and clearances before picking up new sneakers. Figured fuck it I'll make a video of the info I was taught and how I put them on. 🌮🍺
Excellent video, I had questions about the type of lug nuts or washers on the adapter and this answered my questions. Thank you bro!
Very useful, thinking about throwing some on my Royal Monaco
So wat about reverse in General????
I think my first experience with LH treads was bicycle crank. What a dirty trick, I just learned righty tighty and lefty loosey.
No doubt LoL 🤣😂🤣
🤣🤣🤣🤣🤣
Nice video man thank you. 😎
Yes, u can. All these wire wheels adapters are the same,tell you jump up to 22s & bigger,they get thicker 💯
Do you really need to put the spacers?
For the front I use a stubby screwdriver in the brake rotor vent and have it rest on the caliper so I can tighten the front all the way tight .cause you know you if not tight you will get that sound that no one likes when you hit the brake.just my tip!
I haven't put mine on yet, why would you need a spacer? And my lug nuts seems to be too small in diameter for the adapter....there's a lot of play in the holes of the adapters
Red means right... As in right side... Eazy peazy
Will 17" adapters fit 22" wire wheels
do you really need a Lead Hammer for spokes rims with bullet caps? Or can you just hit the tool with a regular Hammer?
U can use a regular hammer but if you swing and miss you will have a dented scratched up rim
Lead or brass hammers will reduce damage by a missed blow. That is the reasoning these type hammer is used/suggested with these wheels. With that said you can use a brick if you choose to, just swing true.
Thanks for sharing ✌️.
Because the wheels are held on by Knock Offs👍🏻
HEY MY TOOL I USE IS NOT SO TIGHT AND IT SCRATCHES MY KNOCK OFF IS URS DIFFERENT?
So u don’t really have to use a lead hammer?
The purpose of using a lead hammer is because its softer then the steel knock off or key your aiming to strike bit to mention the rim itself when you miss. Therefore the lead takes the damage from the blow and not your wheel. If you take a normal hammer and strike your wheel , well I dont have to tell you what will happen and using a dead blow hammer like im using wont work jmfor just the opposite reason. The dead blow will end up being cut from the blade like key arm or fin from 2 or 3 way knock off. The hammer will fall apart. So the lead hammer is the right tool for the job. In a pinch you got to do what you got to do and deal with the outcome.
Hope this helps.
@@The1fromthewest does ur tool scratch ur knock offs?
@@shanoemichael4439put a rag over them is what I do works great I learned after scratching one of mine up
Say bro where can I buy those adapters I'm tryna put some knocc off on my Ls430 haha
So if I want them to come off like if I don't have the wrench all I gotta do is spin the side I want off the way I'm not suposto right ? Cause I don't have the wrench and no shop wants to fuck with it nor do they want to help in any damn way so if that's the case I should be able to jack it up spin it the wrong way and off it comes ? Right well we'll see how far I get with that
My front driver wheel won’t seat on to adapter. What’s your IG so I can send a picture if you can help me out.? Driver side is sitting flush. Any help much appreciated
No iG , post short video on your UA-cam page and share link.
Brand new wheels and adaptors? Paint me a picture homie.
Yes brand new wheels and tire. It seemed like everything was good. Drove the car all day yesterday but went to drive to work this morning and heard something so I parked it. Jacked it up and I can move driver side back and fourth. Can I send some pics to your email?
JOHNNY RAY ua-cam.com/video/-mdgXojCzKM/v-deo.html
Tnks
👍🏻
Or towing
What is your Instagram?
My shit always be falling off
Instagram ????
First of all this video is wack because you have the wrong spacer behind the adapter you need a 1.25 spacer for clearance brake caliper.those studs will brake off why you are driven .
Wack, lol . Really? Why didnt you bring up the orange plastic hammer I used or not wearing osha approved shoes. Wrong spacer is what you got outta this. TROLL!
Knock off also means fake if from china
Topic in mind, Originally the term "knock off " was indicative to hammering on or off the center bolt that held on the rim to the hub. In the mid part and beyond of the 90s decade is when "chinas or no band name" knock off rims adapted and pretty much took over the name knock offs from what the wheels are to what they are not. I'm OG so I call no brand name rims "chinas" and not knock offs. . For some reason we let it slide when newer generations changes the meaning of something that's been around for sometime. Ie. Pound symbol to hashtag. In this case I would rephrase using a synonym and not a homonym. But hey thanks for letting me know.
@@The1fromthewest im a machinists do know real term. We buy knockoff shit from China like your out of date ugly as dare I say "knock off" Chinese Daytons. Those where played out 25 years ago when I was a kid..
@@The1fromthewest white walls looking all shitty. I would have got jumped if I pulled up looking like that car missing white wall paint
Yeah those tires were toast. I just picked those up that day and was only checking fitment and clearances before picking up new sneakers. Figured fuck it I'll make a video of the info I was taught and how I put them on.
🌮🍺
@@Genxpoppy Stop liying dawg
👍