B Molleur Standing Seam Roof Installation | AVRAME Trio 120 Cabins in Twin Lakes Colorado
Вставка
- Опубліковано 12 вер 2024
- Standing seam roof completed on @AVRAME trio 120 cabins in Twin Lakes, Colorado. Done just in time before winter approaches. Thanks for watching & thank you for your support Don't forget to like the video and subscribe to the channel for more upcoming content. ⏰ Video Duration: 16:07 ツ
SUGGESTED VIDEOS:
Entry Dormer / Water Barrier for A-FRAME
• Entry Dormer / Water B...
FULL METAL ROOF in Under 15 Minutes!
• FULL METAL ROOF in Und...
Lake Front Cabin Log Walls
• Lake Front Cabin Log W...
Installing Window Trim for Log Cabin
• Installing Window Trim...
ELOG-Home Cabin Build Kit
• ELOG-Home Cabin Build Kit
Coach's Dream Cabin Drone Shots Start to Finish
• Coach's Dream Cabin Dr...
► Instagram ➭ / balladofbmolleur ► Business Inquiries ONLY:- brennan@molleur.com
#standingseamroof #BMolleur #seamroof #bmolleurconstructionvideo #roofinstallation #buildingahome #coloradohomes #AVRAME #realestate #AVRAMEtrio120cabins
Thank you for watching this video, click the "🆂🆄🅱🆂🅲🆁🅸🅱🅴 🅽🅾🆆" button to stay connected with this channel.
Subscription Link: cutt.ly/8GvOTZR
No one will ever be on that roof any time soon, good job.
Also pro tip, take a piece of shirt and wrap it around the ladder ends and spray it with flex seal. It won’t scuff the roof and it’ll give you grip so it won’t slide.
Im a professional window cleaner, work on ladders all day and gotta say it scared the shit outta me to see yall standing on the very tops of those extension ladders. Nice work tho 👍👍
Awesome video. I hope to build an A-frame one day and this video is inspirational.
Thank you !
Thanks for putting these videos together for all of us interested in a-frames, and Avrame in particular! You're doing a fantastic job. Would love to know how you'd recommend approaching a builder who does traditional construction, and ask them about building something from a structural kit like this... (and if you'd recommend using this in the first place!)
Thanks for the support, means a lot. Most quality builders are a little more old and weathered. There is a lot of labor involved in "swinging" the A-frame trusses into place and then having a man walk the line 35' up to connect and keep everything straight. That being said, any quality builder should have his/her methods to get any home build done efficiently. If they build log cabins, they can most likely get this structural kit in place for you effectively. I recommend using this kit over traditional stick frame, in regards to an A-Frame. Let me know how else I can answer any more questions for you -
Oh p.s. dude you're fearless the way you climb around on those steep roofs like they're rock faces lol l hope you make the big bucs
my man.
I was screwing down multi ribbed on my aframe last year. There was no way I would get within 5 foot of that edge. NO WAY lmao!!!!
Haha yeah it's no fun when you're up there trying to get that fascia metal installed and tied in.
Looks great man
Thank you !
Good music choices.
Shawn David man!
Would love to have someone build me one of these in Pennsylvania
email me:
IronHorseCoConstruction.com
Nice work. Want to build another one in Grand County in a year or so? We've been looking at these for our land.
Great product, they are becoming very popular within the last year and rightfully so.... Grand County is beautiful! Although the book is getting full, I would be interested to hear more about your project! Thanks for reaching out -
@@IRONHORSEhomes How do I get in touch with you guys? I tried the email address on the website, but no response. Thanks!
@@saabracr brennan@molleur.com
Whoa ! those a- frames are up thar". The rubber "button" comment , "after ten years you have to replace". You feel that this won't happen in your build. How if I May Ask?
None of the fasteners on standing seam roof are exposed so you don’t have to worry about deteriorating from the weather and climate. It’s not the fasteners as much as their rubberized grommet that degrades and is susceptible to water after years of weather abuse
Thank you for sharing the process! Can you share what was used for HVAC?
Mechanical Duct work for ventilation. Electric Baseboard and Gas Stove for Heating. No AC needed in our climate (Rocky Mountains)
Nice work gentlemen, my dad built our first house by himself and it’s an A frame too. Also, just curious why is the first panel cut like that? Is the roof not square?
Good question, the top of the gable ends at the ridge beam are at 24" outlookers while the bottom of the sub fascia ties back into the house at Zero. So there is a fabrication on the first panel that we had to make sure was square to the rest of the house so the rest of our panels would run true .
Good afternoon, I'm from Russia, tell me what kind of material are you laying on the roof? if you can give a link. Thanks
Thats an awesome looking cabin/house. I'm a bit conserned about the possible Windfore on that realy large roof. Do you use the basement? There is a lot of space in there. More than enough for all the technical equipement needed for a omfortable home...
Do you mean wind force? footings and stem walls are engineered for correct seismic loads. Yes, pitch of the roof creates a good amount of space. Thanks for your support and reaching out -
Hey bro I just ran across your channel and first off I want to say Im loving the scenery...I think I heard you say you're in Colorado?
Anyways I'm in n.c. not too far from the blue ridge parkway
Which is a park protected by the government but not nearly as beautiful as where you are which brings me to my next thing...I'm confused as to how people are allowed to build in areas that are obviously precious/beautiful/scenic as this I mean sure these houses are probably owned by the super rich but shouldn't these areas be protected? Lol yeah I'm really blown away that people are allowed to build houses in sasquatch territory which should be preserved
Thank for reaching out man. Twin Lakes, Colorado is definitely one of the most beautiful outdoor scenes in all of the US. That being said, I think the state Gov has done a pretty good job protecting private lands and creating large portions of protected space. About a mile down the road from this property is National forest which inhibits any developments to take place. I was raised in these mountains and as sensitive as I am to a bunch of flat-landers coming in to build homes, I am 100% supportive of everyone being able to enjoy the beauty of the mountains and call this place their home! Nothing like it!
🍺🍺🍺🍺🍺
How long did it take from sill plates to roof completed? (and roughly how many were you on site?). Looking at building one of these kits.
about 3 months from sill plate to roof completion. It was just myself and the owner who erected all of the structural kit and roof. Thanks
@@IRONHORSEhomes Awesome, thanks!
Would you take a project for a 1200sqf A-frame in Cripple Creek? Thank you!
email me ironhorsecoconstruction@gmail.com
@@IRONHORSEhomes will do
How big is the cabin and a total cost to build this type of a A frame?
It’s around 1500 square feet. I don’t share costs online, you can email me at ironhorsecoconstruction@gmail.com
So was the roof and everything included in the price of your A frame? Or are you using a local product?
The roof material was supplied by Avrame but was an additional charge from the structural kit purchased by the owner, if that answers your question?
Greetings from Kyrgyzstan, I am interested in the width and length and height how much can you answer please
30' Width X 40' Length x 30' Height
How long did this take to build?
About 4 months from digging foundation to putting metal and siding on exterior. Interior Finishes took about another 4-5 months as the owner did it on his own time.
final costs?
Around 500K