Oh geez!! My apologies, but I actually did confuse myself lol those nicknames are very close. IT WAS YOU! And I do appreciate your advice! This getting older thing is not very much fun lol
@@SladesVWBeetle No problem. I got confused also. Sometimes other members post same/good comments on how to fix things. Glad to pass the wisdom/experience on to others.🙂
You're the encyclopedia Britannica of the VW community of the interwebs.. I feel smarter already. I'm gonna say another smart thing...." Great informative video" Keep them coming👍🇩🇪
i just did mine. I bought the torque converter which made my life so much easier. the tool made it so easy that i had a hard time believing that the gland nut is torqued to 250 ish ftlbs.
Right?!?! I should probably do a dedicated video to this tool, some more people know about it. Honestly it has saved my butt, while trying to get some cranky drum nuts loose.
Glad you covered this. Although I have a drive plate on my autostick super beetle, I am glad you took the time to show each step clearly. I'm having to fabricate special metal pieces to lock the driveplate to the engine so I can torque it down, wish me luck! Always great watching your channel on how to do stuff, thanks.
And also, thank you for taking out the time to leave a comment, I truly appreciate that. You got this, my friend, think, confident, and move forward slowly.
This series is great Timing Mr and Mrs Slade Bess has a striped spark plug while I've got the head off I'm going too get new barrels and Pistions Top end rebuild First time I've had the Motor out of Bess your tips have come in handy already Thank you my friend
I’m glad it’s helpful Brian! The heads are getting new valves put in, wish he would’ve let me do those for the videos lol we’re going to the salvage yard this week, me and Heather. So in a couple of weeks I will continue putting the engine back together on video.
Thanks my friend! We are going Thursday or Friday, that video will be up the following week. Hopefully Heather doesn’t try to bring anything home. 🤦🏼♂️
Great detailed video Mr Slade. I had to chuckle when you said you forgot to press the play button.... If something's going to go wrong, it's when a dang camera is involved 😂
Right? That’s not my first rodeo with doing that. One time I forgot to hit the record button, half hour went by. I then realized I had to take everything back apart and do it all over again lol
I've been following your series with the idea of pulling my engine to work on the heater boxes and install the engine tins (that were not on when this beetle was purchased). I was happy to see the blue mount on your engine stand. I am planning on purchasing a stand and use the bench stand mount with it for the space to work on the flywheel if I chose to do that.
I bought my engine stand at harbor freight. Since beetle engines are really not that heavy. The only thing I regret is I didn’t buy the four-legged stand.
@@styverdyver Yes, that’s exactly my concern. I will go with a four legged one next, and probably give this one to somebody. There’s nothing wrong with it, but I do a lot of awkward stuff lol
I didn’t take it as hating, I appreciate you leaving a comment. I’m not the type of guy that gets upset over stuff like that. Truthfully you are right, but when I say the front then everybody gets all confused lol thanks for being here.
Thanks Slade --- You mentioned you didn't like the three shims you took out --- what was wrong with them? --- You put them back in --- I've heard you say before that there will always be THREE SHIMS ---- If two or four gives you the three to five thousandths that is needed for the end play? ------ Snow and nineteen degrees ------ Rodney
Honestly I was just being picky, they had a couple of scuffs on them. So I’m kind of strange like that. I have read it in many places, where you always want three. You never want more, or less. I read it in so many manuals that it’s stuck in my brain
What is the exact purpose of the 3 shims? And what is the danger of reinserting then not in the exact order in which they were removed? What is the typical life span of a rear main seal?
Slade, you have been my life saver of my 73 Supper Beatle. However, the engine and I have come to an impasse. I cannot for the life of me get the flywheel gland nut off. I've broken my breaker bar and pipe and can't get it to come loose. I'm really reluctant to put any air tools on it, because I don't want to damage the crank. Any suggestions would be extremely helpful.
Nothing changed my mind, you can use either one. I like the dielectric grease because it doesn’t corrode the rubber which you already know that from me repeating myself. But I need a new tube of the dielectric grease
Thank you Dan I truly appreciate that. If they deep well with change it, it would have to be very slight. Not enough to worry about. When you start using extensions, that’s when it changes it a lot more.
One last thing to my earlier comment --- since you have a 250 Ft; Lb. torque wrench -- have you ever followed up and double check the Torq multiplier and your standard torque wrench to see if there is a difference in torque between the two?- Rodney
Funny you brought that up my friend. I should have put that on video. I didn’t think to, so that will be a good shorter video that will be consistent five minutes maybe. I will tighten up with the torque multiplier, then use my torque wrench with the needle, and then use my clicker torque wrench. And we will compare notes. Good idea Rodney.
Nice info on the Torque multiplier tool. 👍 You have me confused, with vintage speed vw, or maybe he give you the same info.
Oh geez!! My apologies, but I actually did confuse myself lol those nicknames are very close. IT WAS YOU! And I do appreciate your advice!
This getting older thing is not very much fun lol
@@SladesVWBeetle No problem. I got confused also. Sometimes other members post same/good comments on how to fix things. Glad to pass the wisdom/experience on to others.🙂
@@vintage76vipergreenBeetle well I certainly do appreciate it that’s for sure. And appreciate you being here.
Thank you so much. I'm restoring an old plane powered by a 1600 VW. Your videos are so helpfull.
That is so awesome! I knew they were used in planes many years ago, but I didn’t know enough about it. Thank you so much for being here!
@Slades VW Beetle Love the big hammer go to for pictorial reference.
You're the encyclopedia Britannica of the VW community of the interwebs..
I feel smarter already.
I'm gonna say another smart thing...." Great informative video"
Keep them coming👍🇩🇪
Thank you my friend, I truly don’t know everything that’s for sure. But what little I do know, I try to put out there.
That torque tool is amazing. Makes working on VW parts ever so much easier. Great video!
It truly is my friend, also it’s great for breaking loose the old 36MM nuts on the drums.
i just did mine. I bought the torque converter which made my life so much easier. the tool made it so easy that i had a hard time believing that the gland nut is torqued to 250 ish ftlbs.
Right?!?! I should probably do a dedicated video to this tool, some more people know about it. Honestly it has saved my butt, while trying to get some cranky drum nuts loose.
Glad you covered this. Although I have a drive plate on my autostick super beetle, I am glad you took the time to show each step clearly. I'm having to fabricate special metal pieces to lock the driveplate to the engine so I can torque it down, wish me luck! Always great watching your channel on how to do stuff, thanks.
And also, thank you for taking out the time to leave a comment, I truly appreciate that. You got this, my friend, think, confident, and move forward slowly.
This series is great Timing Mr and Mrs Slade
Bess has a striped spark plug while I've got the head off I'm going too get new barrels and Pistions Top end rebuild
First time I've had the Motor out of Bess your tips have come in handy already
Thank you my friend
I’m glad it’s helpful Brian! The heads are getting new valves put in, wish he would’ve let me do those for the videos lol we’re going to the salvage yard this week, me and Heather. So in a couple of weeks I will continue putting the engine back together on video.
Ok. I’m going to say something smart. Cancel that; I suddenly realized I’m not that smart. 😂. Seriously though good vid. 👍
Thank you 😂😂
Great video can’t wait for the salvage yard trip!!!
Thanks my friend! We are going Thursday or Friday, that video will be up the following week. Hopefully Heather doesn’t try to bring anything home. 🤦🏼♂️
Another informative video. Always a pleasure to watch and learn something new.
Thank you my friend, and thank you for always being a great person!
Great detailed video Mr Slade. I had to chuckle when you said you forgot to press the play button.... If something's going to go wrong, it's when a dang camera is involved 😂
Right? That’s not my first rodeo with doing that. One time I forgot to hit the record button, half hour went by. I then realized I had to take everything back apart and do it all over again lol
@@SladesVWBeetle Hahaha ya. I know the feeling..... Or having good footage and losing it 😭🙄
Thanks for the video Slade!! Have a great weakend we're ya on the next one.😁😁
Thank you my friend, headed to the salvage yard this week with Heather. Hopefully she don’t bring anything home
I've been following your series with the idea of pulling my engine to work on the heater boxes and install the engine tins (that were not on when this beetle was purchased). I was happy to see the blue mount on your engine stand. I am planning on purchasing a stand and use the bench stand mount with it for the space to work on the flywheel if I chose to do that.
I bought my engine stand at harbor freight. Since beetle engines are really not that heavy. The only thing I regret is I didn’t buy the four-legged stand.
@@SladesVWBeetle I plan to get the HF/4 wheeled stand. I had heard about the 3 wheeled ones tend to want to easily tip over when moved.
@@styverdyver Yes, that’s exactly my concern. I will go with a four legged one next, and probably give this one to somebody. There’s nothing wrong with it, but I do a lot of awkward stuff lol
Great job on the video! Very specific.
Thank you my friend I truly appreciate that.
Nice video!! Please keep the valuable info coming!!
Thank you Lee, and thank you so much for being here
A lot of great information, thanks for the video.
And thank you for being her David and taking the time to leave a comment.
It is the front notice the front 2 cylinders 1&3 even the bentley book says it. Not hateing
I didn’t take it as hating, I appreciate you leaving a comment.
I’m not the type of guy that gets upset over stuff like that.
Truthfully you are right, but when I say the front then everybody gets all confused lol thanks for being here.
Thanks Slade --- You mentioned you didn't like the three shims you took out --- what was wrong with them? --- You put them back in --- I've heard you say before that there will always be THREE SHIMS ---- If two or four gives you the three to five thousandths that is needed for the end play? ------ Snow and nineteen degrees ------ Rodney
Honestly I was just being picky, they had a couple of scuffs on them. So I’m kind of strange like that. I have read it in many places, where you always want three. You never want more, or less. I read it in so many manuals that it’s stuck in my brain
What is the exact purpose of the 3 shims? And what is the danger of reinserting then not in the exact order in which they were removed? What is the typical life span of a rear main seal?
nice job.
Thank you Jim I hope you’re having a great day
I have a matco beer mug
I don't think my chair goes that high. 🤔 May have to put a lift kit on it. 🤘
I’m actually surprised how nice that says, I just hope it holds out for a while.
Good video
Thank you Bob, and thank you for commenting.
Slade, you have been my life saver of my 73 Supper Beatle. However, the engine and I have come to an impasse. I cannot for the life of me get the flywheel gland nut off. I've broken my breaker bar and pipe and can't get it to come loose. I'm really reluctant to put any air tools on it, because I don't want to damage the crank. Any suggestions would be extremely helpful.
Three years ago, you recommended used dielectric grease on the seal. This time you recommended oil. What changed your mind ?
Nothing changed my mind, you can use either one.
I like the dielectric grease because it doesn’t corrode the rubber which you already know that from me repeating myself. But I need a new tube of the dielectric grease
@@SladesVWBeetle I've had great success with your dielectric grease suggestion :)
Doesn’t using a deep well socket change torque ratio? Awesome video keep em coming
Thank you Dan I truly appreciate that. If they deep well with change it, it would have to be very slight. Not enough to worry about. When you start using extensions, that’s when it changes it a lot more.
One last thing to my earlier comment --- since you have a 250 Ft; Lb. torque wrench -- have you ever followed up and double check the Torq multiplier and your standard torque wrench to see if there is a difference in torque between the two?- Rodney
I have been wanting to do the same to verify the torque multiplier . When doing the drums mine seems sloppy and wanted to check the accuracy.
Funny you brought that up my friend. I should have put that on video. I didn’t think to, so that will be a good shorter video that will be consistent five minutes maybe. I will tighten up with the torque multiplier, then use my torque wrench with the needle, and then use my clicker torque wrench. And we will compare notes. Good idea Rodney.