I have done only few generator stators, dont have enough workforce to dismantle and assemble, its good to see you working on it, infact it lifted my confidence,,
I like generator stators to rewind easy money.need only to take extra finger muscles because wires are bigger than usual motors..Thanks help you out buddy.Take care.
@@windertrucker6230 sometimes customer bring stators but i dont take cz they want to do it for cheep and if no voltage is produced ,i will be screwed, since am an expat they will yell and shout, i will be in great trouble, there might be some other problems with exciter, rotor, avr or even engine, so i fear. Will do once i get my chance, if regulations change, i will certainly get some help,, generators are next ony list, yhh they pay a lot if full fledged service can be provided even onsite, and i havnt done the rotor poles before, think i should fabricate one stand for it,
That’s a lot of work yah it seems like you need to to the whole until it runs.Here only rewind and assemble no engine,we just check everything make sure it works and send it out.
@@harishharikumar1543 we don’t run it just check winding connections are good and all the components sent it out to customer they are i charge of hooking up to the engine and another company to run the generator.we only need to make sure the winding are good and all the wirings.
@@windertrucker6230 eso es lo importante, publica los datos del motor como lo hiciste con el motor de 400HP/300KW lo publicaste escritos en la pantalla en color amarillo.
Concentric double layer pala to sir dito ako nalilito eh paxenxa na sir bago lng kasi kaya medyo madami tanong pero iba to sir sa mga nakikita kong concentric na double layer yung porma coil nya
Iba kasi ang layout pag sa generator pero halos parehas din sa 3 phase pag nag rewind kasi ako ng generator same position ng wire pwede namang gawin sunod sunod yan naiba lang ang layout pweding e rewind ng parang nag rerewind ng lap winding
I want to ask you one question please help me if one generator got 100 kva capacity. Is it providing 100 KVA each phase of winding or 100 KVA total out put of 3 windings please reply brother thanks.
Hi brother i had it inPart 2 of the video,Sorry I can’t upload longer video just to make it the whole process of rewinding That’s why i always make it half.will be uploaded soon brother just a couple things to work out.Thank you have a nice day❤️
Peace be with you sir ,sir pde po makuha sir drawing nito kung paano siya naka layout sa stator gusto ko po kasi makita kung paano siya naka lagay sa slot salamat sir sana po sir mabigyan nyo po ako drawing nito kahit eto lng po salamat sa inyo sir
It was very interesting and spectacular, thank you for your time.
My pleasure!Thank you
I have done only few generator stators, dont have enough workforce to dismantle and assemble, its good to see you working on it, infact it lifted my confidence,,
I like generator stators to rewind easy money.need only to take extra finger muscles because wires are bigger than usual motors..Thanks help you out buddy.Take care.
@@windertrucker6230 sometimes customer bring stators but i dont take cz they want to do it for cheep and if no voltage is produced ,i will be screwed, since am an expat they will yell and shout, i will be in great trouble, there might be some other problems with exciter, rotor, avr or even engine, so i fear. Will do once i get my chance, if regulations change, i will certainly get some help,, generators are next ony list, yhh they pay a lot if full fledged service can be provided even onsite, and i havnt done the rotor poles before, think i should fabricate one stand for it,
That’s a lot of work yah it seems like you need to to the whole until it runs.Here only rewind and assemble no engine,we just check everything make sure it works and send it out.
So you run it coupled?
@@harishharikumar1543 we don’t run it just check winding connections are good and all the components sent it out to customer they are i charge of hooking up to the engine and another company to run the generator.we only need to make sure the winding are good and all the wirings.
Blown away,mind blowing.you have done great
Thank you my friend,best regards😊
Back side finishing👌💯
Thank You 😊
Молодец чувствуется опыт в работе работает аккуратно
❤️
Good work 👍👍👍👍
Thank you brother
good winding as always 👌👌👌👌🙏🙏🙏🙏🙏
Thank You my friend 🙏
I want to know about the
Nice work Sir,,,very clean job,,,,kmusta na Dyan sa Canada Sir?
Ok lng thanks.kumusta?
Good morning master
Nice...👍👍
Good morning too.Thank you😊
Watching master
Salamat bossing 👍
what's the name of the thing you press on top as a wire lock?
Bakelite sheet
Bravissimo statore avvolto
Benissimo
Quante cave sono.
Passo avvolgimento?coll.tipo,!
At the Part 2 my friend 🙏👍
Nice video sirjii 🥰😎
Thank you sir😊
@@windertrucker6230 WC 🥰
Bravo bonne métier 🙏🙏🙏🙏👍👍
Thank you 🙏 ❤️
No indica cuántos hilos de awg, espiras, cantidad de Ranuras Potencia del Motor, saludos de Lima
Como se llama la musica de fondo
EXCELLENT WORK LOVE ❤️❤️❤️❤️
Thanks for the love brother.❤️
Hi dear
@@aisha-ji9ur hi brother
Best video👍.....irritating background music😒
Buenas tardes amigo soy de Venezuela también soy embobinador y kiero saber como se embobina un generador marca. Generac de 20 kva
como van alojadas las bobinas que dices que tiene 3-4-4-3 vueltas
3 4 4 3 same number of wires inside slot
En Q país están compañeros yo los saludos cordiales desde Guatemala
Hi it’s in Canada my friend
Nice
Thank You 🙏
¡nice job! I appreciate if you can send me information about your equipment, coil machine model and serial.
Grettings from Guatemala
¡congrats!
Hi.Thanks,i don’t know if this machine still exist in the market,what i seen on the nameplate was built 1970’s.
@@windertrucker6230 thank you so much, do you know if in USA, can I find the machine, enterprise name or some contact.
Firs time to watch
Thanks
porqué no lo hicisteis corrido
no tengo el motor pero me aseguro que la conexion este bien y la empresa me dijo que anda bien.
@@windertrucker6230 eso es lo importante, publica los datos del motor como lo hiciste con el motor de 400HP/300KW lo publicaste escritos en la pantalla en color amarillo.
Thanks for the video, you are an electrical artist, but stop blasting people with annoying "music!"
Your welcome...Thanks
what are the connections
Watch the videos please
@@windertrucker6230 how to contact you
Sir i want to Motore winding Mashine
How many phase in this genaretor
3 phase
Whatsapp number bro
No whatsapp bro
Concentric double layer pala to sir dito ako nalilito eh paxenxa na sir bago lng kasi kaya medyo madami tanong pero iba to sir sa mga nakikita kong concentric na double layer yung porma coil nya
Iba kasi ang layout pag sa generator pero halos parehas din sa 3 phase pag nag rewind kasi ako ng generator same position ng wire pwede namang gawin sunod sunod yan naiba lang ang layout pweding e rewind ng parang nag rerewind ng lap winding
esa forma es la que se llama tres etapas
❤t
I want to ask you one question please help me if one generator got 100 kva capacity. Is it providing 100 KVA each phase of winding or 100 KVA total out put of 3 windings please reply brother thanks.
Total 100kva not each phase
کارت خوب بود اما جنبه آموزشی نداشت.حداقل آموزش کانکشن هم میدادی بهتربود،🌹
Sir plz by data shere mee plz i,am your big fann
Data is in the video just watch the whole video.Thanks
I want to do this work
Where are you from, will you get my work there?
I’m from Philippines.no sorry we’re not hiring bro.
But why
@@kjelectronickod it’s because we have enough worker to do the job bro.
Please, tell me size and weight of wire
Wire 10#16.
50 lbs. of wire
@@windertrucker6230 is a generator ac like Stamford
@@حسينمحمد-ظ3ع2غ yes it is bro
please find lneed connection drow
Hi brother i had it inPart 2 of the video,Sorry I can’t upload longer video just to make it the whole process of rewinding That’s why i always make it half.will be uploaded soon brother just a couple things to work out.Thank you have a nice day❤️
Bro diagram of avr system
Will upload next at my video Stamford generator
Hi
Sir connection digram chahiy
Its on the video bro.thanks
Peace be with you sir ,sir pde po makuha sir drawing nito kung paano siya naka layout sa stator gusto ko po kasi makita kung paano siya naka lagay sa slot salamat sir sana po sir mabigyan nyo po ako drawing nito kahit eto lng po salamat sa inyo sir
Sorry Nelson ngayon klng nabasa comment mo naumpisahan kna yong isa cge pag naisingit ko gagawan kita Salamat
@@windertrucker6230 maraming salamat sir tinatapos ko pa panoodin yung lahat ng video mu sir salamat talaga sir
@@nelsonpantaleon7751 you’re welcome,salamat din sa support.🙏
I can do a little sir
A little fir today big man couple years keep it up winder
Shrji.aap.mottor.waindhng.kha.ful.data.dikha.ahi.1hp..sh50hp.thk.data.dikh.ihnhr.daya.aotr.daya.lhnt.daya.waht.