@3:15 the guy was supposed to run across the yard waving his hat SCREAMING SHUT IT DOWN !!!!! SHUT IT DOWN !!!!!!! followed by PARKER PARKER, COME IN PARKER !!!!!!! Anyway, anybody else notice everything was going O.K. until the camera focused in on the machine that started giving problems?
Nice drone shots! I had my drone battery take shit while filming a paver this past week and it landed right in the hopper. Luckily the operator saw it go in and stopped the machine before it became a $1000 speed bump....
Being obliged to go up and down the ladder is dumb. It's slow to get things going,and it's dangerous for the man. Can't it be possible to have the controls on the platform instead of downstairs ?
I can hear that guy swearing up a storm every time the alarm goes off and he has to go up and down the ladder. I'd be saying Take This Job And Shove It! Lol!
Nice crusher. But i think and i observe there is no interlocling between those machine. Error coming in each machine should have a program to stop feeder to prevent jammed in each conveyor.
Hello friend, Get【Price & Details 】about 【Full stone crushing plant】Click: www.chinafote.com/stone_crushing_plant.html?yt or contact my WhatsApp for more details: +8615518108838
Neat! I learned to operate powerscreener this past summer... Slightly older than your equipment LOL The screener is helping a jaw and roller crusher. I enjoyed it! Hoping to get back to it this summer.
absolutely correct. if the jaw is tightened a bit, the throughput would be alittle smaller on the top end, that would result in more being screened in the first journey on the screen deck.. which would result in less having to go into the cone. it woudn't jam so much.
Great drone footage. Here in Utah a contractor I know talked UDOT into looking at 1.25" minus state spec base for a big project in SLC. It sure is a cost savings over 3/4". I think that's overkill and it costs a lot more to break it down to 3/4".... Even 1" would be a nice savings.
Type I aggregate base or 1.5" minus here in Nevada. You see it used more for highway and freeway work which handles heavier traffic loads. Much easier to make too, you are correct.
dear friend, Get【Price & Details 】about 【jaw crusher 】Click: www.chinafote.com/jaw_crusher.html?yt or contact my WhatsApp for more details: +8615518108838
The machine suffered a 'metal stop' (that silver bar across the top house's a magnet which detects metal) which requires someone to check the feed before it enters the cone crusher. What part was dangerous in your opinion and what was the hazard? To 'isolate' the machine would require shutting/stopping it down completely, which means you need to stop all the other machines as well. Completely unnecessary particularly given the number of metal stops in short succession.
Why would it shut down from over feed ? there should be a sensor on the cone to stop that happening. anyway a cone should be choke fed. My bigger concern would be the fact that they are not scalping out on the jaw as the product looks dirty.
Tolle Aufnahme von der Anlage👍. Ich würde aber den Kegelbrecher bischen enger stellen, da kommt mir zu viel Überkorn wieder in den Kegelbrecher zurück, was die Produktion stört. Wo oft gehen bei euch die Transportbänder kaputt?
Need that blow bar impact crusher powerscreen 500 what I use won’t have near the over size like with that jaw and it will eat table size rocks if curtains are adjusted properly
dear friend, Get【Price & parameter 】about impact crusher 】Click: www.chinafote.com/impact_crusher.html?yt or contact my WhatsApp for more details: +8615518108838
Yup. If you listen carefully you can hear the engine loosing rpm from @3:10 until the alarm sounds off at 3:15. Looks like there's way to much fine material been sent back from the screener.
No magnet on the cone picking station??? Or even on the screener belt to cone. Would save you a shit ton of headaches . I been doing this same shit for the past 3 months straight feeding with a komatsu pc290 excavator making 3/4 stone from clay shale.... I dont half to tell you how much it sucks.
400 tph!!! You got to be kidding me what a load of BULLSHIT!!! The Primary wont do that for a start! You would be lucky to get 180 tph through that powerscreen crap!
Hello friend, Get【Price & Details 】about 【10-800tph Full stone crushing plant】Click: www.chinafote.com/stone_crushing_plant.html?yt or contact my WhatsApp for more details: +8615518108838
Hard to say exactly, major variables if you buy new vs used. I want to say the setup shown here not counting the loaders, is probably in the 1M - 1.5M range.
it is can for concrete mixing, dear friend,,we can talk the tech datails about concrete mixing with the gravel, you can add me the whatsapp+8613803716624
Hello friend, Get【Price & Details 】about 【Full stone crushing plant】Click: www.chinafote.com/stone_crushing_plant.html?yt or contact my WhatsApp for more details: +8615518108838
It's actually pretty good equipment from our experience with it. Yes the feeder is having some issues either with the magnet or a sensor, never did find out what exactly was causing it.
dear friend, Get【Price & Details 】about 【granite crusher 】Click: www.chinafote.com/jaw_crusher.html?yt or contact my WhatsApp for more details: +8615518108838
@@QuarryCrushingmachine hey man I don’t have what’s app. Do you have an email I chat with you through? Our j45r McCloskey is only doing around 100 tons an hour I’m a roomie at this and my boss just says figure it out
God I hate these machines....I'm a mechanic for a demolition company and we have 5 impact crushers and two jaws....constant problems....the only ones that seem to work somewhat decent are called gipo...there out of Switzerland....these tin cans have unreal electrical problems
@gobigorange TIN CANS.....nothing more....FAG main bearings.....scania 5 cylinder....1/2 thick wear plates...if you turn the machine to fast the convayors will bend them self's...garbage
I agree! Plastic crushers I call them! Best crushers where Svedala or Sandvic now I believe Metso pretty good too! Beauty of the Svedala you can change the throw of the Gryatory by turning the bush rather than changing the bush! Powerscreen owned by Terex!!! Nuff said!
@@mrmick4757 you said it...iv heard metso was good....never been around them tho...the old powerscreens where great....once terx got a hold of them they became more worried about there share holders....plastic crushers 😆😅🤣 nailed it! That's what the shop is going to call them now thanks for your input
So what makes a plant like this is a jaw crusher a cone and a screen the jaw crusher crushes the big rocks which then goes to the the screen and then gets sorted out on the different levels of the screen then the rest go to the cone to get crushed more which then goes back to the screen to get sorted again
Statt einer mal sagt der soll nichts mehr nachfüllen bis der Stau beendet ist! Ne lieber den Kollegen 20x Leiter rauf Leiter runter. Zudem ist es nicht effizient das Feinmaterial sollte vor dem Grob Material aufs Band fallen damit es nicht erst durch das Grobe Material durch gerüttelt werden muss.
Hello friend, Get【Price & Details 】about 【Full stone crushing plant】Click: www.chinafote.com/stone_crushing_plant.html?yt or contact my WhatsApp for more details: +8615518108838
Здравствуйте, друг, получите 【Цена и подробности】 о компании 【Камнедробильная установка】 Нажмите: www.chinafote.com/stone_crushing_plant.html?yt или свяжитесь с моим WhatsApp для получения более подробной информации: +8615518108838
@3:15 the guy was supposed to run across the yard waving his hat SCREAMING
SHUT IT DOWN !!!!! SHUT IT DOWN !!!!!!! followed by PARKER PARKER, COME IN PARKER !!!!!!!
Anyway, anybody else notice everything was going O.K. until the camera focused in on the machine that started giving problems?
The problem was the idiot on the loader over feeding the machine
Nice drone shots! I had my drone battery take shit while filming a paver this past week and it landed right in the hopper. Luckily the operator saw it go in and stopped the machine before it became a $1000 speed bump....
Being obliged to go up and down the ladder is dumb.
It's slow to get things going,and it's dangerous for the man.
Can't it be possible to have the controls on the platform instead of downstairs ?
Was thinking the same thing or even proper temporary stairs or him a lot safer.
The one I've run has a remote...
Мьабальчо. 1
Habe ich mir auch gedacht warum er nicht ein Fernbedienung für die Beiden Anlagen hat. sowie ein Funkgerät für den Lader Fahrer.
I actually fabricate and weld some of the framework for this machinery. It's pretty cool to see it functioning in the field
those jaw plates are about a month too old, making the cone work harder, thats why youre getting so much return
They are scheduled to be replaced next week.
I can hear that guy swearing up a storm every time the alarm goes off and he has to go up and down the ladder.
I'd be saying Take This Job And Shove It! Lol!
Nice crusher. But i think and i observe there is no interlocling between those machine. Error coming in each machine should have a program to stop feeder to prevent jammed in each conveyor.
Hello friend, Get【Price & Details 】about 【Full stone crushing plant】Click:
www.chinafote.com/stone_crushing_plant.html?yt
or contact my WhatsApp for more details: +8615518108838
Thats what the attendant operator is for. :)
@@michaelraymount4108 war das der der immer die Leiter rauf und runter rennt?
Neat! I learned to operate powerscreener this past summer... Slightly older than your equipment LOL The screener is helping a jaw and roller crusher. I enjoyed it! Hoping to get back to it this summer.
They need to tighten up on the jaw crusher, it's barely choked.
That would help out the cone for sure
absolutely correct. if the jaw is tightened a bit, the throughput would be alittle smaller on the top end, that would result in more being screened in the first journey on the screen deck.. which would result in less having to go into the cone. it woudn't jam so much.
Why isn’t the reset button up in the platform???
Awesome, I'd enjoy seeing more of these kind of videos. Thanks.
Nice steady run , one belt feeder to cone crusher need to slow the feed just to keep belt steady run not overfill cone crusher .
Other than a few quirks these guys have it down to a science... Good job 👍
Great drone footage. Here in Utah a contractor I know talked UDOT into looking at 1.25" minus state spec base for a big project in SLC. It sure is a cost savings over 3/4". I think that's overkill and it costs a lot more to break it down to 3/4".... Even 1" would be a nice savings.
Type I aggregate base or 1.5" minus here in Nevada. You see it used more for highway and freeway work which handles heavier traffic loads. Much easier to make too, you are correct.
Why such a temporary setup for a situation that will never go away?
What's the point of jaw feeder being so full? It doesn't give undersize much of a chance to fall thru grizzly section.
dear friend, Get【Price & Details 】about 【jaw crusher 】Click:
www.chinafote.com/jaw_crusher.html?yt
or contact my WhatsApp for more details: +8615518108838
@@ftmcrusherbriquettemachine2584 I have n intention of knowingly buying any ccp product, ever.
What is the cost of this type of operation.. in equipment cost only
Varies, Probably 2000.00 per hour.
Good on you for flying over this, not much chance of a safe landing in there.
That 2nd crusher, the 1150 looks like at total PITA. How many times is that operator gonna havta go up/down/up/down, just to hit a damn button?
Is that the loaders pins squealing I hear?
My 972 was notorious for that.
Grease is the key here.
That ain’t the the pins squealing it’s the lift rams. Add some Cat hydraulic oil additive.
At the 3.30 mark shouldn't be leaning over to see what the problem is with isolating first. SAFETY FIRST
yes and then he put his in the feeder belt to clear rocks
The machine suffered a 'metal stop' (that silver bar across the top house's a magnet which detects metal) which requires someone to check the feed before it enters the cone crusher. What part was dangerous in your opinion and what was the hazard? To 'isolate' the machine would require shutting/stopping it down completely, which means you need to stop all the other machines as well. Completely unnecessary particularly given the number of metal stops in short succession.
@@stewartgrainger7525 ... he did not 'clear' rocks but shuffles them about a little checking for metal before it went into the cone crusher.
Jaw screen cone,how many kapasity each ours ?
Lol that black truck over there covered in dust.
Wow. What a footage. Excellent cinematography 👏👏👏👏
Is it possible to evaluate if the vibrating screen or trommel screen is better? Depending on the application?
Run the feed over a 2 inch minus pre screen get the fines out !
Nice job 👌
Save loader all that running around I put long stacker conveyor that moved side to side from belt that permanent station
Too bad the video doesn't really show the end result....the product.
Very good
love to see this..
They are completely overfeeding the secondary crusher the hole time. No wonder it shuts down the hole time.
Why would it shut down from over feed ? there should be a sensor on the cone to stop that happening. anyway a cone should be choke fed.
My bigger concern would be the fact that they are not scalping out on the jaw as the product looks dirty.
just wants more tension on the feed belt on the cone
Its meant to be 'choked' or completely full for it to operate correctly.
Can't see the end result, but good drone work
Tolle Aufnahme von der Anlage👍. Ich würde aber den Kegelbrecher bischen enger stellen, da kommt mir zu viel Überkorn wieder in den Kegelbrecher zurück, was die Produktion stört. Wo oft gehen bei euch die Transportbänder kaputt?
Need that blow bar impact crusher powerscreen 500 what I use won’t have near the over size like with that jaw and it will eat table size rocks if curtains are adjusted properly
Inertia 5066 with the lower apron set at 2” and this will run smooth as butter
Impact crusher's don't fair well with the rock we have, usually 3-4 days and the blowbar's need changed.
Joe Rock tried ceramic bars?
Not that I'm aware of, how do they compare? We have an abrasive granite rock source.
dear friend, Get【Price & parameter 】about impact crusher 】Click:
www.chinafote.com/impact_crusher.html?yt
or contact my WhatsApp for more details: +8615518108838
maybe just me but that 2ndry looks to be working way too hard.
Yup. If you listen carefully you can hear the engine loosing rpm from @3:10 until the alarm sounds off at 3:15. Looks like there's way to much fine material been sent back from the screener.
What was causing the cone crusher to shut the feed down?
Metal detector false alarms most likely
At 11:41 what is that little mini conveyor belt for & what does it do & what is it use 4?????🤨🤨🤨🤨🤨🤔🤔🤔🤔🤔
You can reject the dirt out there
i like this crusher
is it suitable with coal?
No magnet on the cone picking station??? Or even on the screener belt to cone. Would save you a shit ton of headaches . I been doing this same shit for the past 3 months straight feeding with a komatsu pc290 excavator making 3/4 stone from clay shale.... I dont half to tell you how much it sucks.
nightmare..... all that needs to run like clock work......
What's the production rate on this set up?
About 400 tons per hour.
400 tph!!! You got to be kidding me what a load of BULLSHIT!!! The Primary wont do that for a start! You would be lucky to get 180 tph through that powerscreen crap!
Hello friend, Get【Price & Details 】about 【10-800tph Full stone crushing plant】Click:
www.chinafote.com/stone_crushing_plant.html?yt
or contact my WhatsApp for more details: +8615518108838
@@JoeRockYT how many buckets per hour is being put in there??
Dobar dannn😘😘😘
Curious as to how you capture the audio. I assume it's not captured by the drone but by a mic or camera on the ground?
the crushed rock, is it for asphalt, concrete mixing or what?
Primarily concrete and road base.
@@JoeRockYT ,thanks for the resp......what is the "investment range" on one of those things?
Hard to say exactly, major variables if you buy new vs used. I want to say the setup shown here not counting the loaders, is probably in the 1M - 1.5M range.
it is can for concrete mixing, dear friend,,we can talk the tech datails about concrete mixing with the gravel, you can add me the whatsapp+8613803716624
Hello friend, Get【Price & Details 】about 【Full stone crushing plant】Click:
www.chinafote.com/stone_crushing_plant.html?yt
or contact my WhatsApp for more details: +8615518108838
Going Up & Down !!!
I gave you a thumbs up but you should have a closer look to the crusher. 👎
Same thing over and over. I seen it the first time.
How do you like the Powerscreen Equipment? I like KPIJCI equipment myself. It seems as though they were having problems with the feeder on the cone.
It's actually pretty good equipment from our experience with it. Yes the feeder is having some issues either with the magnet or a sensor, never did find out what exactly was causing it.
Which country is this
How much does this cost I have square miles of stones in Africa with a billions dollar market just waiting
I wonder how much gold goes threw there..... in one year?
Granite?
Yes it is.
dear friend, Get【Price & Details 】about 【granite crusher 】Click:
www.chinafote.com/jaw_crusher.html?yt
or contact my WhatsApp for more details: +8615518108838
Same job Loader Excavator
How many tons an hour are you guys crushing????
I'm thinking we are right around 200-250tph.
Hello.Get【price & details】about 【10-800 tons per hour stone crusher】please click web:
www.chinafote.com/stone_crusher.html?Y-zl
250tph , dear brother, if you need, add my whatsapp+8613803716624
@@QuarryCrushingmachine hey man I don’t have what’s app. Do you have an email I chat with you through? Our j45r McCloskey is only doing around 100 tons an hour I’m a roomie at this and my boss just says figure it out
@@droppinbaums jackerhuayi@gmail.com
At least working on this job you'll retire with strong arms and legs from climbing up and down on that ladder 200 times a day.
American wrecking inc is the best at crushing!
im looking for a job .... i want to be a wheelloader driver...
Cone is being over fead. Operator looks to have a tough time. Lots of spillage. Not a fan of terex Powerscreen
dear friend, Get【Price & parameter 】about 【cone crusher 】Click:
www.chinafote.com/cone_crusher.html?yt
God I hate these machines....I'm a mechanic for a demolition company and we have 5 impact crushers and two jaws....constant problems....the only ones that seem to work somewhat decent are called gipo...there out of Switzerland....these tin cans have unreal electrical problems
@gobigorange nope
@gobigorange TIN CANS.....nothing more....FAG main bearings.....scania 5 cylinder....1/2 thick wear plates...if you turn the machine to fast the convayors will bend them self's...garbage
I agree! Plastic crushers I call them! Best crushers where Svedala or Sandvic now I believe Metso pretty good too! Beauty of the Svedala you can change the throw of the Gryatory by turning the bush rather than changing the bush! Powerscreen owned by Terex!!! Nuff said!
A GOOD Mechanic cant fix STUPID!!!!!!!!!!!!!!!!!
@@mrmick4757 you said it...iv heard metso was good....never been around them tho...the old powerscreens where great....once terx got a hold of them they became more worried about there share holders....plastic crushers 😆😅🤣 nailed it! That's what the shop is going to call them now thanks for your input
Country name
Got 37 belts a jaw a Cone a Impact
job
🙏🙏🙏
looks like this set-up has a couple of issues... not working efficiently
And 3 screens
Mesin hebat
Meu nome e iLTON sou operador de pá carregadeiras e sito muita vontade trabalhar numa estrutura desta vocês estão de parabéns
Hell I don't feel bad my Cone died today filled up fuck electronics
HD 720 :)
I see where the material is loaded into the hopper I guess, but where does the dirt go?? Awesome footage
So what makes a plant like this is a jaw crusher a cone and a screen the jaw crusher crushes the big rocks which then goes to the the screen and then gets sorted out on the different levels of the screen then the rest go to the cone to get crushed more which then goes back to the screen to get sorted again
ماشاء الله
What is the raw material which is being used, is it any type of rocks?
Statt einer mal sagt der soll nichts mehr nachfüllen bis der Stau beendet ist! Ne lieber den Kollegen 20x Leiter rauf Leiter runter. Zudem ist es nicht effizient das Feinmaterial sollte vor dem Grob Material aufs Band fallen damit es nicht erst durch das Grobe Material durch gerüttelt werden muss.
萌え～
Uh... alla chulda
too much material being kicked backed for second trip ... worn main crusher
You are wrong try to rethink that one. Here is a tip, study what each machine does.
Mucha maquina poca produccion hay mucho retorno por que esta muy abierto el secundario el pobre gordito se va acabar subiendo y bajando del secundario
Like
Когда новое видео
I think this equipment was made by Chinese engineers....
Hello friend, Get【Price & Details 】about 【Full stone crushing plant】Click:
www.chinafote.com/stone_crushing_plant.html?yt
or contact my WhatsApp for more details: +8615518108838
you are right
Total rookies. Balance things up fellas. The parameters need adjusted bad on the cavity level of that crusher smh!
Yes and the Fallopian tubes are blocked you BIG Dummies
Залатоёи metso
Здравствуйте, друг, получите 【Цена и подробности】 о компании 【Камнедробильная установка】 Нажмите:
www.chinafote.com/stone_crushing_plant.html?yt
или свяжитесь с моим WhatsApp для получения более подробной информации: +8615518108838
Poorly edited, a 2 minute video bloated to 8. Most time wasted on boring hoppers and very little on the separation process.
get out
This vedio is not too good