So I have the same wiring harness clearly. You plug in and run power and ground to that bar on the front of the razor. Where do the yellow wires go to?
I have a 2016 rzr 1000 XP4, will all the part #'s listed on your vid work for my conversion? Do you have the part number to just replacing the hood cover instead of the bracket?
The 2020+ hoods do not fit the 2019 and older rzr’s, which is why you need that bracket. However you can buy the 2016-2018 turbo hood and it will work, but you’ll still need the bracket.
Good video. Am thinking about amber fangs to use as turn signals. Can you advise the approximate total cost of the parts needed less the fang lights themselves? Just the total, not the individual parts. Thank you.
The fang lights I used (Kemimoto) have the additional wire for the amber turn signals. I just did not wire them yet. Total cost depends on where you purchase your parts from, but a good estimate is around $500-$600 without fang lights.
Yes you do because you’ll need to run the 16-18 turbo hood which uses the old style bracket at the front. If you go with the new style 19-current turbo hood it won’t lock in at the back of the hood because of the dash change.
@@CollaGoUnLTD thank you for the reply. Awesome video, seeing you do this swap inspired me to do the same to my 2016 1000 s. I'm thinking about doing the dash also so I can use the 2019 hood. What's your thoughts. I just like the new dash look.
Do a Google search for 7670054, I saw a bunch of websites to order them from. Edit: just realized I left a “0” out on the part number for them in my list, Sorry about that.
Sorry I don’t sell the kit, You’ll have to price parts through your local Polaris dealership or online stores using the pet numbers listed in the video.
good video mine is a 2018 turbo I don't think I need the bracket u should sell the kits lol to make it more easier what Is your location im in Fernley Nevada
Just swapped my 2016 rzr 1000S to the new 2020 facia and dash. Turned out great. Thanks for your videos. Looking at doing the rear next.
How much in parts???
Man this is amazing , I’m gonna have to do the conversion myself. Thanks for the part numbers saved many of us so much time.
Well I did your gage swap and now this is on the next to do list!!!! Thanks for all you info and vid on this!!!!!
Do you know if this would work on my 2017 900? Same set up as yours but a 900
Yes
will I be able to do this on a 2018 Polaris razor xp 1000 4 door and if so what parts will I need
That’s pretty sweet! I didn’t know it could be that easy to swap over! Thanks for the awesome videos!
You’re welcome! Thanks for checking out the channel!
@@CollaGoUnLTD do u kno if u can also convert the rear fascia and tail lights?
I was wondering would work for 2013 rzr xp 4 900?
Nice job, looks great.
What was the swap cost
Hi I'd have 2010 rzr wht can I'd change my rzr v too.
Hey. Buddy. I'm try find a set for my. 2010
I did the rear finally also
what do i need to do the rear?
Wow awesome video ! Been wanting to do this thank you!
From which side i can get rzr parts
Added a meaner look! Looks good.
Awesome video! Makes me want to do it to my 15 xp 1000! How much was everything?
What year is your rzr
It’s a 2020
@@CollaGoUnLTD where did you order all your parts from
@@jacobtrejo3871 I ordered from my local Polaris Dealership
This kit will work for the 2019 Rzr 1000 S model as well. It’s the same fascia as the old one you had on the machine
Nice job in the video.
Thank you!
awesome bro , thank you!!
So I have the same wiring harness clearly. You plug in and run power and ground to that bar on the front of the razor. Where do the yellow wires go to?
The yellow wires are for turn signals if you decide to do a street legal kit. They are not used if not, just tie them up out of the way.
Awesome video
Awesome
Man !!!
Is it possible to replace the rear Fascia from an 1000 xp to a 2020 turbo rear fascia with the 3rd brake light?
I looked into this and from what I can tell it would be a major overhaul to make that happen…
It fits up perfectly to an xp1000. You just have to buy the bracket pieces. It won't work with the S models though
Can I do this on my 2013 rzr 900 xp ?
Yes as long as your front end looks like my original one did.
I have a 2016 rzr 1000 XP4, will all the part #'s listed on your vid work for my conversion?
Do you have the part number to just replacing the hood cover instead of the bracket?
The 2020+ hoods do not fit the 2019 and older rzr’s, which is why you need that bracket. However you can buy the 2016-2018 turbo hood and it will work, but you’ll still need the bracket.
I have the 2015 rzr 1000xp. What bumper would you have to use after the front fascia swap? 2015 or 2019? TIA.
Would the fang lights be able to support a blinker kit still?
It depends on which fang lights you buy, but most of them that are aftermarket will support blinkers.
Good video. Am thinking about amber fangs to use as turn signals. Can you advise the approximate total cost of the parts needed less the fang lights themselves? Just the total, not the individual parts. Thank you.
The fang lights I used (Kemimoto) have the additional wire for the amber turn signals. I just did not wire them yet. Total cost depends on where you purchase your parts from, but a good estimate is around $500-$600 without fang lights.
@@CollaGoUnLTD Thank you kind sir.
If you had a Polaris front bumper would that still fit?
You have gaps under your hood after this install?
I’m having a hard time finding the winch cutout with that part number, is there any other way to find it besides the part number?
fixmytoys.com/products/polaris-2884118?variant=31560867709009&gclid=CjwKCAjwtdeFBhBAEiwAKOIy5zTJAQKzlKwwkhwsq5eeAiwKfp2GMouk6ICniuO-0jpJhcECseS59xoCkQAQAvD_BwE
@@CollaGoUnLTD thank you! Great video also!
Awesome video! Thanks! I put together the price list for everything and I came up with about $680 for everything. Sound right?
Yep that sounds pretty accurate!
How many hours did it take to complete this job.
It did not take long at all maybe 2-2.5hrs
I saw a few websites sell the fang light harness and it looks like it’s just plug n play but idk what it plugs too?
You’d wire one end into your bus bar under the hood for power, then the other end would have oem fang light plugs to plug into each light.
Did you have to cut into the headlight wires or was there a kit to clip into them?
No cutting at all, you can buy a separate plug and play harness for the fang lights.
I have a 2017 xp turbo with a polaris front bumper, do you know if the bumper will still work or would i have to get a different bumper?
Will this work for a 2015 900s?
Yes as long as your front end looks like my original front end.
Looks great what did u spend on the whole swap thinking about doing it
Around $600 but that will depend on where you can source the parts from and the deal you can get.
What website did u get the front fascia and everything
Where did you get the grilles?
I got them from my local Polaris dealership. The part numbers for them are listed in the video description!
Can you help me out I’m trying to order the parts , mine is a 2016 1000xp turbo 2 seater
Do I need the bracket if I want to put a turbo hood on it ??
Yes you do because you’ll need to run the 16-18 turbo hood which uses the old style bracket at the front. If you go with the new style 19-current turbo hood it won’t lock in at the back of the hood because of the dash change.
@@CollaGoUnLTD thanks man!
How much did it cost to make this transformation?
Around $600
Can this be reversed?
Ive got a wrecked 2021, will the 2016 fascia fit onto 2021?
I’m not sure because of the hood and new upgraded dash fit the new fascia different so I’m not thinking it will work.
Where did you purchase your set up from
What’s a rough estimate on what this would cost?
It all depends on how much you can get the parts for but a solid estimate is around $600
Heyy ,around how much did it cost you?
Around $600 but that will depend on where you can source the parts from and the deal you can get.
How much did everything cost you?
The price will vary depending on where you order your parts from. A good average would be around $600
What did it run ya? Price wise
Around $600 but that will depend on where you can source the parts from and the deal you can get.
Would it work on a 2017 turbo rzr
Can you do a rear facia swap? Or can it not be done?
I looked into this and it would take a large amount of custom work to be able to make it fit as the whole rear cargo area etc is completely different.
@@CollaGoUnLTD thank you for the reply. Awesome video, seeing you do this swap inspired me to do the same to my 2016 1000 s. I'm thinking about doing the dash also so I can use the 2019 hood. What's your thoughts. I just like the new dash look.
Can you still run a front bumper with this grille swap?
Yeah bro.
Where did u order the parts from?
I purchased the oem Polaris parts through my local dealership, and the rest came from RZRparts.com
@@CollaGoUnLTD only thing i can’t find is the push nuts u got a link to them?
Do a Google search for 7670054, I saw a bunch of websites to order them from.
Edit: just realized I left a “0” out on the part number for them in my list, Sorry about that.
How much $ for kit?
Sorry I don’t sell the kit, You’ll have to price parts through your local Polaris dealership or online stores using the pet numbers listed in the video.
good video mine is a 2018 turbo I don't think I need the bracket u should sell the kits lol to make it more easier what Is your location im in Fernley Nevada
CollaGoUnLTD rough estimate on the price?
@@tylerb4838 around
$600 depending on what kind of deal you can get on parts
for xp 4 1000 EPS 2018 would be the same parts?
Do you think it will fit a 2016 Polaris rzr 900 and if it can fit were do you buy it
Yes it will, all the part numbers are listed in the video and description, you can find them online out at your local dealership
@@CollaGoUnLTD ok thanks a lot
what did the swap cost you?