👉 Visit My 3D Printing Channel! www.youtube.com/@3DParts4U 👉 Visit My Speed Modeling Channel! www.youtube.com/@AllVisuals4USpeed 🤝 Get Commercial Access To My Catalog Of 3D Files! www.patreon.com/3DParts4U (Or Support Me)
interesting demo - freecad is really complicated in Fusion or Shapr make the tupes boolen join select tup faces inside and delete to trigger the auto heal
HI, first, thank you for creating these series. Really helpful as I just tasting CAD with FreeCAD. The method you showing her did not work for me for whatever reason. I ended up creating a sketch on the inner diameter of each pipe and the pocketed. It worked. Im using version 0.21.2
Great Video but I don't have construction lines on my program or I can't find it any where - you are busy - but if you could point me in the right direction that would be great. Also if you could do a video on how to set up the Ondsel program or is it good to go out of the download - thanks
Thanks! Try to right click on the toolbar in the sketcher workbench. It can be that you miss some buttons there. Including the External Geometry button.
Great video - however when I changed the size of the smaller tube the hole never changed - it stayed the same size as the original - if you have a comment I appreciate but yeah now I can fix my storm water run-off - thanks
👉 Visit My 3D Printing Channel! www.youtube.com/@3DParts4U
👉 Visit My Speed Modeling Channel! www.youtube.com/@AllVisuals4USpeed
🤝 Get Commercial Access To My Catalog Of 3D Files! www.patreon.com/3DParts4U (Or Support Me)
So so clear! Love the way you explain… thank you, sir!
You're welcome!
Nice! Why do you use a shapebinder on the small tube and a sub-shapebinder on the big tube?
Thanks! Somehow it resulted in a cyclical error when I tried to use two normal ShapeBinders. 🙃
interesting demo - freecad is really complicated
in Fusion or Shapr make the tupes boolen join select tup faces inside and delete to trigger the auto heal
Yeah that will be easier, but remember it's free software. 😉
You can do it by boolean/cutting too in free cad.
HI, first, thank you for creating these series. Really helpful as I just tasting CAD with FreeCAD. The method you showing her did not work for me for whatever reason. I ended up creating a sketch on the inner diameter of each pipe and the pocketed. It worked. Im using version 0.21.2
Thank you!
trying to draw a pulley with retainer ring slots on the in side for 2 bearings
?
No it was just for this tutorial. 😉
Great Video but I don't have construction lines on my program or I can't find it any where - you are busy - but if you could point me in the right direction that would be great. Also if you could do a video on how to set up the Ondsel program or is it good to go out of the download - thanks
Thanks! Try to right click on the toolbar in the sketcher workbench. It can be that you miss some buttons there. Including the External Geometry button.
I dont think this will work if the bodies are not plainar, like if its made from loft. Is there a way to do that? Thanks!
👍I haven't try that yet. Thanks for the idea!
Great video - however when I changed the size of the smaller tube the hole never changed - it stayed the same size as the original - if you have a comment I appreciate but yeah now I can fix my storm water run-off - thanks
Thanks! Did you also use a ShapeBinder?