Great video! I have a soft wash system with a 5.5hp motor and 5gpm pump. If I don't get the height I need using my shooter tip, will using an xjet w/my 4gpm pressure washer be better?
12v softwash and a pressurewasher with downstream. Juslt like you and many of the pros working it. I can roof,house, and surface clean. I don't need x jet then. This was fun. Straight forward talk to begin business is very helpful Jason. I know I needed it in the beginning and I still am in the beginning after a year. Just bought the first big surface cleaner Roto-EZE 20". check it out its a break down handle set up from PSI the same company that provides the Bandit setups. The local store sells them and works with them. I'm sure you've already "picked one" though. Have a great day!
Love the videos. I'm in NKY and first year pressure washing. Your videos have been a lot of help. I'd be interested to find out about whatever courses you offer. Done a few big jobs at apartment complexes, but still have a billion questions.
It's all about the nitch you are working in. I have to get 4:1 out of my work. My chemical is relatively expensive so a gallon flush for each section is unreasonable. Lastly I work around sensitive materials. If I don't have instant access to rinse water I'm screwed. Just a few of the vital reasons I carry a bucket for my application. If I was doing roofs a tank draw would no doubt be the go to. Carrying a bucket on a wet roof is about as sketchy an idea as any.
Why not use a 5 gallon jug with a cap and drill a hole in the top the size of the hose. An open container just seems like a bad accident waiting to happen
Man that skit really dropped knowledge on what professionals in both fields would argue about, and I learned a damn good bit of info / was entertained! As others have mentioned, if you could do this skit, arguing against yourself as though you were actually an advocate for __X__, I'd love to be able to just listen to the years of experience and be entertained! I make sure I always turn off my ad-block ;) P.S. For the Fans: If you want to give back to Jason, be sure to watch the ads on his videos ALL the way through. Only a few seconds, can give him a very nice boost to help him grow his channel / afford time to make great content like this. Just a heads up
Holy sh#t that was great Jason! Lol! I prefer soft washing with 12v 7gpm pump low maintenance and lower overspray then the other ways. I rinse with 4000psi 4gpm pressure washer with soft wash jrod tips. Yes I have two hoses to mess with but it's easy and not complicated. I also can mix my 50gal batch tanks anyway I need to. Like u said whatever works for u. U made me laugh with the guy at end saying I like soft wash. Lol!
Great video! I have a soft wash system with a 5.5hp motor and 5gpm pump. If I don't get the height I need using my shooter tip, will using an xjet w/my 4gpm pressure washer be better?
12v softwash and a pressurewasher with downstream. Juslt like you and many of the pros working it. I can roof,house, and surface clean. I don't need x jet then. This was fun. Straight forward talk to begin business is very helpful Jason. I know I needed it in the beginning and I still am in the beginning after a year. Just bought the first big surface cleaner Roto-EZE 20". check it out its a break down handle set up from PSI the same company that provides the Bandit setups. The local store sells them and works with them. I'm sure you've already "picked one" though. Have a great day!
I never use the xjet
Love the videos. I'm in NKY and first year pressure washing. Your videos have been a lot of help. I'd be interested to find out about whatever courses you offer. Done a few big jobs at apartment complexes, but still have a billion questions.
pressurewashhelp.com/training
pressurewashhelp.com/inpersontraining
Excellent video! lol kept me intrested and informed
I have 12V, 24V and remote downstream. I did X jet for a few years. A bucket and brush before that. I hope to never go back to X jet or the bucket.
He said "I like soft wash" LOL
Yes he did
With a jrod you turn off the chemical just by switching tips
Will this product (x jet) dilute chemical’s and if so by how much? Thank you.
Why carry and maintain an extra piece of equipment if not necessary?
Lmao!! The guy at the end was the icing on the cake!! Bahahahaha...
Dj best part
I have a 5000psi 4gpm pressure washer. What surface cleaner would you recommend? Any help would be appreciated.
16 or 18"
Thank you very much for the help have a blessed day
One more question for ya. Is 5000psi to much pressure for a surface cleaner?
@@robertgreen241 I would say yes use unloader to turn it down
It's all about the nitch you are working in.
I have to get 4:1 out of my work.
My chemical is relatively expensive so a gallon flush for each section is unreasonable.
Lastly I work around sensitive materials. If I don't have instant access to rinse water I'm screwed.
Just a few of the vital reasons I carry a bucket for my application.
If I was doing roofs a tank draw would no doubt be the go to. Carrying a bucket on a wet roof is about as sketchy an idea as any.
Yup
LMFAO! Thanks DJ I needed that smile this morning
Yep I still laugh at it every time I watch it now
Foam cannon for me. Little at a time.
The guy at the end is a great looking stud!!! 😂😂😂
is that what you call it
Sounds like a case of soft tacos vs hard tacos. Why not both? 🤷♀️
Whats a estimate of the shooting range of downstream and xjeting
Some of this depends on what your GPM of your pump is
Why not use a 5 gallon jug with a cap and drill a hole in the top the size of the hose. An open container just seems like a bad accident waiting to happen
Man that skit really dropped knowledge on what professionals in both fields would argue about, and I learned a damn good bit of info / was entertained!
As others have mentioned, if you could do this skit, arguing against yourself as though you were actually an advocate for __X__, I'd love to be able to just listen to the years of experience and be entertained! I make sure I always turn off my ad-block ;)
P.S. For the Fans: If you want to give back to Jason, be sure to watch the ads on his videos ALL the way through. Only a few seconds, can give him a very nice boost to help him grow his channel / afford time to make great content like this.
Just a heads up
Thanks for watching man
truth!
That’s some real content there boys
Thats all i give is real info.
Lol the end is awesome. I like softwash lol
Holy sh#t that was great Jason! Lol! I prefer soft washing with 12v 7gpm pump low maintenance and lower overspray then the other ways. I rinse with 4000psi 4gpm pressure washer with soft wash jrod tips. Yes I have two hoses to mess with but it's easy and not complicated. I also can mix my 50gal batch tanks anyway I need to. Like u said whatever works for u. U made me laugh with the guy at end saying I like soft wash. Lol!
Thanks 👍
We incorporate all three. They all have their place.👍🏻
I do agree with that also
Laughed my butt off with this video....😂🤣
All tools mentioned have their rightful place on any wash truck...👍✌
It was a good video I need to do more of these
I like this
Dang Jason!!! You conquering your fear of stand up comedy?!? This was great!!! Lol
I’m not gonna quit my day job I was just having a little fun and I like having fun
Jason,
Omg, now i have to get all three system so i don't have to argue with myself like this video, LOL...
Thanks for this helpful and funny video.
Just pick one to go
I love this video!!! Well done
I was having fun
Awesome video sir lol 😂 😎👍🏼👍🏼
Thanks
and then the Deluxe Super Soaker downstream injector entered the door and beat both lol that's all i use now
Where do you get it from and why do you like it so much
@@kingofpressurewash pressuretek and im able to downstream brick without an xjet
XJet = Windows
Downstream = MacOS
Softwash = Linux
Heya buddy. Was gonna buy a hoodie from ya... But uh, 404 errors on every one.
Omg I love this great video, Jose mejia from Get it done pressure washing in south Carolina
I was having fun and thought this would be a good video to do
Man you crack me up!😂
X jet for me.
X-jet allll day long!!
That’s awesome way to make money
Nice video bro 😊
Pick one and go wash! Get that Sh on and wash it off, That simple! Funny Video!
But it’s not that simple because which one do I pick? 😂
I wish he would use the actual terminology in all his videos instead "thing" or "Stuff" ect
I getting better at that
Bro this was funny as crap!
It still makes me laugh every time still
Nice vid i love it🤣🤣🤣🤣🤣🤣
Just having some fun
Knowledge over Nonsense lol
Hahahahahahaha....I got that beat
How’s that
Foam cannon.... works awesome
Lots of false information here unfortunately 😢. You don’t carry an open bucket. Nozzles are universal. So much more
#Downstreamforlife.
I heard you like doing house washes with 12 V better
@@kingofpressurewash lmao. Not even when I pull cord breaks will I finish with he 12v. I'd rather fix my cord
💧Team Downstream 💦
That is 3funny!!
I tried 😂
😂😂😂😂😂 just pick one
😂
Lol
😂
🤣🤣🤣
Pretty funny
LIKE!!!
Just having a little fun and making it interesting
😂
Trying to make it interesting
Lololo
I had fun doing it at least
@@kingofpressurewash I like it, you should do more like it
Good greif, are you aiming this at children? I got to two minutes.