[113] Centsys Gate Remote Coding / Programming

Link Learning
Centsys Gate Remote Coding / Programming
1. Fit the link to J1 with power on the receiver. This puts the receiver in link learn mode. On multichannel receivers, fit the links on the channel jumpers to specify the functionality that is required for remotes that are to be learned into the system. If no channel jumpers are linked, the system defaults to learning to channel 1.
2. When jumper J1 is fitted, the LED will turn on as per master learn mode.
3. Press a new button to learn it into the system.
If the button is a new button, the LED will switch off while the button remains pressed to confirm that the system has detected that a new transmitter button has been pressed.
If the button is a demastered button, the LED will flash while the button is held down.
The trailing edge of the transmitter transaction is acknowledged with a short single beep, confirming that the button has been successfully remastered.
a. If any channel jumpers are bridged, then buttons that are demastered can only be remastered if their associated channel matches the channel selected by the channel jumpers.
b. If no channel jumpers are bridged, then the system will remaster any demastered buttons; regardless of the button's associated channel.
Any additional remotes learned into memory are also given master privileges.
Hence, every button added to the receiver in this way automatically becomes a master for functionality associated with the channel specified by the channel jumpers.
8. Obviously, there is no timeout associated with link learning mode since the link bridging jumper, J1, forces the receiver to stay in link learn mode.
----------------------------------------------------------------------------------------------------------------------------------
For more helpful tips and tutorials on Centsys Gate Remote Coding, be sure to subscribe to our channel and hit the notification bell so you never miss an update. Thanks for watching!
Please subscribe to my channel, motivates me to make more videos ( it’s free) tinyurl.com/ga...
----------------------------------------------------------------------------------------------------------------------------------
• [112] How to manually ...
• [111] How to stop your...
• [110] Setting up your ...
• [109] Upgrading an old...
• [104] How to Lock your...
• [105] Replacing Faulty...
• [107] NICE gate remote...
• [102] No name Sliding ...
• [101] Fix a noisy sect...
• [103] Gliderol GTS+ se...
• [114] ATA PTX5 remote ...
#centsysgateremotecoding #programming #gateremote

[@paulashaw6128]

Hello, I can program my Centsys remotes to open but remotes won’t close the gate. What setting do I need please?

[@rollerdoors]

Could be a few different issues. Incorrect mode set, Photo Beam setting activated or beam is blocked. Perhaps factory reset and run setup wizard

[@paulashaw6128]

@@rollerdoors thank you so much, I will try that👍🏻

[@uberlindadelcarmennahuelch5774]

Como se cambia la pila o es desechable