Got a question for you, 2015 h accent. 127k miles, has ticking sound, opened v/cover saw chain has slack, hitting the vvt housing in the bottom. I believe thats the tick i hear. Changed chain, guides and tensioner. Still same, i believe chain still has same slack, will pull v/cover tomorrow. Same sound still exists, comes in after 2k rpm, at idle purrs perfect, drives excellent. What do you think? Sprockets? No oil pump pressure signs on dash.
So you have like rattle noise or chain noise? Does it make noise only 2k rpm or does it make noise too after sittinf for a while then first start up.? Not the high pressure pump ticking noise?
Hi Marko had a question about my 2016 Hyundai sonata. I was driving and the steering wheel light came on and the traction control light on so the steering wheel got hard so I drove home and let it sit and was figuring out what to do so I went back out right now and started the car and it was working again lights off too
Hello , so I am experiencing similar issues it first called for the catalytic converter driver side to be replaced change that and now cylinder 2 has been misfiring, changing the coils' fuel injectors , spark plugs but it's still missing- 2015 hyundai genesis 3.8
Did you do compression test on that cylinder and compare with the non misfiring cylinder? I think you have to do that atleast you can rule out if you have mechanical issue.
Did you find what it was. My accent is turning off and I change the sensor like on the video but it still has like electricity problems. The lights and air start to fade please help
What sensor did you replace? Whats the real problem with the car, is there any warning lights? If you can make video and send it to my email,i will review it and see if i can help. Thanks
My 2014 Accent occasionally crank but won't start after driving. Could it be low fuel pump,high fuel pump, fuel regulator problem? There's no check in light.
What you can do if you suspect fuel issue, either drive it and monitor oxygen sensors, or when it just cranks if you can hook up fuel pressure gauge to see if you have pressure.
@@quietlion33 otc makes good tool, for the dongle its oem software you can get any obd2 scantool that has good graphing capabilities so that its easy to read the data.
My 2014 accent just recently started crank but no start after driving around. I've changed the low pressure fuel pump under the back seat. What do you think is the problem?
Yup, that was it. After replacing the burnt out fuse sensor. My 2012 Accent started right away. Great job. Thanks for the video.
Thank you very much sir this is the problem of my accent for months❤ greetings from your subscriber philippines🇵🇭
Congratulations on having 1k subscribers boss hahaha
Hahaha theres 1k people that believe in the channel. Hope it will grow more
Nice, thanks!
Great job sir!
Thank you sir.
Got a question for you, 2015 h accent. 127k miles, has ticking sound, opened v/cover saw chain has slack, hitting the vvt housing in the bottom. I believe thats the tick i hear. Changed chain, guides and tensioner. Still same, i believe chain still has same slack, will pull v/cover tomorrow. Same sound still exists, comes in after 2k rpm, at idle purrs perfect, drives excellent. What do you think? Sprockets? No oil pump pressure signs on dash.
So you have like rattle noise or chain noise? Does it make noise only 2k rpm or does it make noise too after sittinf for a while then first start up.? Not the high pressure pump ticking noise?
@@hyundaitech do you have email address where i can send more info?
@@alij.7390 yeah, hyundaitech261@gmail.com
It the key. Just play with you key and will start
Hi Marko had a question about my 2016 Hyundai sonata. I was driving and the steering wheel light came on and the traction control light on so the steering wheel got hard so I drove home and let it sit and was figuring out what to do so I went back out right now and started the car and it was working again lights off too
Scan for codes, and also check charging voltage, and battery condition. Let me know what you find
Eps box getting bad
Hello , so I am experiencing similar issues it first called for the catalytic converter driver side to be replaced change that and now cylinder 2 has been misfiring, changing the coils' fuel injectors , spark plugs but it's still missing- 2015 hyundai genesis 3.8
Did you do compression test on that cylinder and compare with the non misfiring cylinder? I think you have to do that atleast you can rule out if you have mechanical issue.
It's the engine module control
I have a problem checking the computer Immobilizer Accent 2014
Galing..
Did you find what it was. My accent is turning off and I change the sensor like on the video but it still has like electricity problems. The lights and air start to fade please help
What sensor did you replace? Whats the real problem with the car, is there any warning lights? If you can make video and send it to my email,i will review it and see if i can help. Thanks
@@hyundaitech whats your email? I made a video
@@marciyeli1979 mullafelipe@gmail.com
Hey man, I'm also having same issue 😢
The lights and stereo are turning off, then car stops, refusing to start.
How do you solve it?
So you rather do all of this before checking the fuse lol 😅
I thought the same thing. That was a lot of work just to find a bad fuse.
My 2014 Accent occasionally crank but won't start after driving. Could it be low fuel pump,high fuel pump, fuel regulator problem? There's no check in light.
What you can do if you suspect fuel issue, either drive it and monitor oxygen sensors, or when it just cranks if you can hook up fuel pressure gauge to see if you have pressure.
@@hyundaitech Which fuel pressure gage do you recommend? What software and OBDII Dongle are you using with your Samsung Tablet.
@@quietlion33 otc makes good tool, for the dongle its oem software you can get any obd2 scantool that has good graphing capabilities so that its easy to read the data.
Which OTC model?
My 2014 accent just recently started crank but no start after driving around. I've changed the low pressure fuel pump under the back seat. What do you think is the problem?
Mine is doing the same thing and we have check the fuse it’s but it only cranks it’s Hyundai Accent 2011
When you go ignition on does it have immobilizer icon on the dash? Like on the video?
@@hyundaitech yes it does
@@lusindisosogwangqa6715 check for codes, maybe crank sensor? Fuel pressure?
Bro can you tell me tools name plz
Which tool? The scantool, any obd 2, for the testing, you can use any multimeter or test light.
Can you help me
@@Autoscan9 whats wrong with the vehicle, you can message me hyundaitech261@gmail.com
What's emf11
Oh, thats the connector name i think if i still remember correctly the one in the left kick panel.
Wasting time on diagnosis, just change the spoilt module and all done. Some mechanics just want to make money and not work
Yup
Bro i have same fault in my car butt all fuses ok
Maybe it needs key programming?