Thank you so much sir, I was searching this video since 4 months but I can't find. Once they asked me the latest standard of lifting in ADNOC but I only explain the three types of lifting.
The underlying principle is that the risks involved in a routine lift are already known and mitigated. A non-routine lift refers to lifting operation that is complex, carried out for the first time or lifting close to the lifting capacity of the crane.
Is everyone aware of and do they fully understand the lifting and hoisting procedures applicable to the lift? Has everyone involved with this lifting operation attended the toolbox talk? Has a pre-use inspection of the lifting equipment been carried out and are the lifting accessories tagged or marked with: 1. Safe working load? 2. A unique identification number? 3. Is correct color code applied and certificate validity verified? (iv) Are all safety devices working? (v) Does everyone know the Appointed Person of the lift? (vi) Is everyone competent and aware of his or her tasks? (vii) Is there a current Lifting Plan and JSA and does everybody understand the job and precautions? (viii) Does everyone know the environmental limits (e.g. maximum permissible wind speed) for the lift? (ix) Is the lift area controlled and is everyone clear if the load falls or swings? (x) Are signalling methods and communication agreed and clear to you?
@@amalmalikudyvarghese1487 Hoists can only move loads up and down, while cranes can move loads up and down and side to side. For Example, A good way of noting the difference between hoisting and lifting is by looking at how a flag is raised! When you see a flag being raised what is the flag attached to? A rope! This is a classic example of a hoist system. The rope is attached as a loop to a pulley system at the top and bottom of the flag pole which allows you to raise and lower the flag. As you pull one side of the rope down the other side moves upwards and allows the flag to rise. The flag can’t go anywhere but up or down. This is a key difference between hoisting and lifting. Now let’s look at how a flag is raised using a lifting system. Say the flag is attached to an extendable pole. When the pole is engaged it will telescope (telescoping boom) upwards and allow the flag to rise. However, with the flag being attached to a pole, it can be moved around in a circle and change angles along with just moving up and down.
Safe Mechanical Lifting Plan lifting operations and control the area I confirm that the equipment and load have been inspected and are fit for purpose I only operate equipment that I am qualified to use I establish and obey barriers and exclusion zones I never walk under a suspended load
Nice job , Good presentation
Thank you so much sir, I was searching this video since 4 months but I can't find. Once they asked me the latest standard of lifting in ADNOC but I only explain the three types of lifting.
Bahut achhe se explain Kiya hai
Shukriya
Jazakallah khair
Very good bhai jan. Allah apko aor ilm se nawazy. Ameen
Excellent video
Excellent video please detailed video on appointed person , question ask during interview thanks
Nice🎉
Thank you for uploading such informative video. Please explain what's the difference between routine lifting and non routine simple lifting?
The underlying principle is that the risks involved in a routine lift are already known and mitigated. A non-routine lift refers to lifting operation that is complex, carried out for the first time or lifting close to the lifting capacity of the crane.
Adib bahi nice
@@tariqmahmood9972 thanks janab
Please make full video of Rigger level 1 , 2 and 3 interview questions and answers according Adnoc.
Will make soon, alots of stuff yet to come just busy with nebosh idip exam
TQ for info,,,,
Plz also tell us about 10 questions of Safe Lifting Operations
Will upload in next video
Excelent sir how to apply for lifting supervisor.😊
For working on Adnoc site as lifting supervisor first you need to have third party training certificate and then you need to pass Adnoc interview
Good
Make a video on pwr
Thank yuo
Do a video regarding the 10lifting questions
noted
Is everyone aware of and do they fully understand the lifting and hoisting procedures applicable to the lift?
Has everyone involved with this lifting operation attended the toolbox talk?
Has a pre-use inspection of the lifting equipment been carried out and are the lifting accessories tagged or marked with:
1. Safe working load?
2. A unique identification number?
3. Is correct color code applied and certificate validity verified?
(iv) Are all safety devices working?
(v) Does everyone know the Appointed Person of the lift?
(vi) Is everyone competent and aware of his or her tasks?
(vii) Is there a current Lifting Plan and JSA and does everybody understand the job and precautions?
(viii) Does everyone know the environmental limits (e.g. maximum permissible wind speed) for the lift?
(ix) Is the lift area controlled and is everyone clear if the load falls or swings?
(x) Are signalling methods and communication agreed and clear to you?
Bro, if u know please share through reply the difference between hoisting and lifting ?
@@amalmalikudyvarghese1487 Hoists can only move loads up and down, while cranes can move loads up and down and side to side.
For Example,
A good way of noting the difference between hoisting and lifting is by looking at how a flag is raised!
When you see a flag being raised what is the flag attached to? A rope! This is a classic example of a hoist system.
The rope is attached as a loop to a pulley system at the top and bottom of the flag pole which allows you to raise and lower the flag.
As you pull one side of the rope down the other side moves upwards and allows the flag to rise.
The flag can’t go anywhere but up or down. This is a key difference between hoisting and lifting.
Now let’s look at how a flag is raised using a lifting system.
Say the flag is attached to an extendable pole. When the pole is engaged it will telescope (telescoping boom) upwards and allow the flag to rise.
However, with the flag being attached to a pole, it can be moved around in a circle and change angles along with just moving up and down.
Sir Lifting supervisore ka ek vedio banaiye Jo ADNOC interview Me puche jate h
Noted
Sir please tell me
What is the safe mechanical lifting
Safe Mechanical Lifting
Plan lifting operations and control the area
I confirm that the equipment and load have been inspected and are fit for purpose
I only operate equipment that I am qualified to use
I establish and obey barriers and exclusion zones
I never walk under a suspended load
Thanks sir
Make video for approval for appointed person
Please share Lifting 10 questionare
will be upload soon
Yer lift ki pictures hony chahiye
Noted
Excellent video