Part 1 of myself repairing the four wheel drive clutch on this Case tractor. Enjoy the video! I’ll put up the next part of the video when I get the parts to finish it.
got a maxxum 110 in my shop right now 4wd light comes on but no 4wd tested all the wiring and the solenoid all good i assume this may be my issue, not sure if you will see this or not but if you do did your 4wd light work with the switch aswell as mine is just will help point me in this direction. cheers mate
The light worked on that 125. If you put power and ground to the 4wd solenoid and you can hear it click. It means the solenoid is okay electrically. I think I pulled the solenoid off and check to make sure the valve moved when power was applied. The clutch is most likely burnt out if I had to guess
Where is the oil line located that needs to be pulled out??
got a maxxum 110 in my shop right now 4wd light comes on but no 4wd tested all the wiring and the solenoid all good i assume this may be my issue, not sure if you will see this or not but if you do did your 4wd light work with the switch aswell as mine is just will help point me in this direction. cheers mate
The light worked on that 125. If you put power and ground to the 4wd solenoid and you can hear it click. It means the solenoid is okay electrically. I think I pulled the solenoid off and check to make sure the valve moved when power was applied. The clutch is most likely burnt out if I had to guess
@@ianpennings2439 yea thats my thought cheers mate will drop the drop box today when i get into work good stuff mate