Minelab coils repairing and making them better, how to pull the coils apart and rebuild.

So you want to make the best coils for yourself, take note of what I explain.
#detectormods
detectormods.com
‪@DetectorMods‬

[@NorjiLab-bw3tu]

You have inspired me to put a one of your new mono cable on my gp3000 coil. The outer covering has totally perished. If I wreck it , its a learning curve and I have a few commander replacements.Nev

[@DetectorMods]

It is very easy to do as long as you do it slowly and take your time.

[@pkgoldopalhunting]

good to see inside the coil good info thanks

[@DetectorMods]

It is all simple but easy to get it wrong.

[@pkgoldopalhunting]

@@DetectorMods yes mate ide like to get a old coil and have a look inside how it works i not a tec electrical person but like looking how things work and see if i can repair it

[@roymanewell4958]

brilliant vid.....

[@danielflinn3571]

Thanks for sharing

[@billyingram8347]

Awesome 🎉

[@DetectorMods]

Keep those old coil shells.

[@instantskincareanti-agingn6232]

Great information. Thank you.

[@DetectorMods]

Glad it was helpful!

[@BM-wi9kt]

Good info are you going to do the new coil build? Or will you build for customers

[@DetectorMods]

Both!

[@BM-wi9kt]

Cool.i will bring mine over.

[@adhawk5632]

Ive got a 14x9 coiltek sdc coil that i never use, i prefer the 11" round. Can the 14x9 be re-made better? It has dead spots on the sides. Cheers 👍👌🇦🇺

[@DetectorMods]

Anything can be achieved with time and patience.

[@davecoleman409]

Would wd40, sprayed onto a rag and wiped carefully over the tape do the release job?

[@DetectorMods]

Anything that stops it being sticky should work.

[@stevenjozefik659]

Just warm it up a bit , smd hot air gun 🔫

[@leonardredenbach7547]

Any chance you could rebuild a monster 100mm coil to suit a 6000 or anyone you know would build one thanks Woody.

[@DetectorMods]

Minelab stopped anyone doing that by having coded ic chips placed inside their coils and only they and selected coil manufacturers can make a coil that works, So the only way to make a different coil is to pull the board out of a factory coil but then you can make a dongle to run any coil.

[@stoop-tech1060]

hello every time🙂🙂🙂🙂🙂