Indian Challenger MotoVlog #7 - Custom Dynamics SaddleBag and Driving Light Installation
Вставка
- Опубліковано 2 лип 2024
- Learn the secret to hiding cables and installing these Big City-bright lights with Custom Cynamics!
We install these saddlebag lights:
www.customdynamics.com/indian...
these driving lights:
www.customdynamics.com/probea...
with these brackets:
www.customdynamics.com/probea...
Our music comes from Soundstripe
soundstripe.com?fpr=brian14
Use coupon code "twoindians" to save 10%
00:00 - 01:00 Intro
01:01 - 03:54 Saddlebag light installation
03:55 - 08:14 Driving Light Installation
08:15 - 10:24 Driving Light quick test and explanation
10:25 - 11:30 BONUS
Lets Go!!!! 🤙🏾🔥
Love from DeKalb Mississippi USA 🇺🇸
I have the bag lights on and the Indian driving lights in the garage. I need to get them on! I have had them since January. Bad Brian! Another great video brother.
Thanks for the video! 💯
You bet!
Great job with touring the cable through the bars. 💪🏾
Nice lights and install.
Awesome lights
I love my S B lights, love them. The more visibility the better.
Great share Fam!!!! 🤙🏾🔥
Really good video Brian and the audio while trying to get the tape off was genius. Very helpful installation and they look awesome!
👍 pretty nifty
Killer audio and music Fam 🔥
Music = Life... right? Music has to be good.
That challenger looks sharp. Great idea with routing the wires through the engine guard bars. 👍🏾
Love the bag lights. Not sure if I want the lights out that wide, however they look pretty bad ass…
I love the rear bag lights. Even i had no issues installing. Didnt know the Indian lights were just running lights, glad i went with custom dynamics! Also love that the driving lights dont need to be flashed but not a fan of the install. Love the color of your bike! I put the hard lowers on with the Indian lights and aside from having to have them flashed (poor form, Indian), i love the looks and quality of the lights. Love knowing it makes the bike look awesome with much higher visibility.
I don't like watching your Challenger Videos anymore!........Because afterwards I wanna have one as well!.....But I can't imagine terminating with my Springfield that has so much grown on me over almost 6 years! :-)
You can have both!
🤘🤘🤘
I just recently added some custom dynamics bag lights over the summer to coincide with my run turn brake Controller I already had in and man what a world of of a difference. I agree why didn't Indian do that from the get go. Great video.👍
Thanks buddy!
Looked like my cat when he is doing a half pike with a three quarter twist.
LOLOL
lol @ removing adhesive 🤣🤣
Thanks!
thanks for the donation! it is greatly appreciated!
Nice. Crazy amount of detail in the editing. Egads man.
Graffiti Bridge though. You got more video coming for THAT little teaser?
Oh yeah, count on it!
Keep the vids coming
I plan on it!
That had to be hard drilling thru brand new bars to run the wire!!
not really, i knew it was gonna happen just wish that plug was smaller.
Nice video. I installed the bag lights and halo crash bar lights as well. However I installed the bar lights on the inside of the engine guards because I didnt want them to take the hit in the event of a tipover. BTW that 2-3 minute delay on the shutdown almost prompted me to return them. Tech support said that they would shut off in 30 seconds but my experience was like yours. Hopefully they will put an addendum on the instructions.
Thanks for the tip!!
Those crash bar lights look great, although I wouldn't want anything to stick out wider than my highway pegs.
Yeah you can flip them to the inside of the bars also.
@@TwoIndians Given that you have a red bike, do you wish you would have gone with the smoked lenses for the bag lights? I have a Springfield DH in Blake Smoke, and I'm torn which lense color to go with...red or smoked.
@@waltermitty7452 i go for brighter. I think the red blends niocely with the color of the bike too. all personal choices...
Great video but I'm curious about your wiring? The holes that you drilled out have a sharp edge on the inside and can possibly rub and cut the insulation and wires in time. If it were me, I would go find some wire bushings to protect it from possibly shorting out.
That’s another reason why I pushed a bunch of RTV into the holes.
Another ripper vid.. in regards to the lights you put on, and why they stay on.. I'm thinking as must new cars lights stay on for the safety walk into the house or just provide some light in the dark for a few minutes.. just thinking out loud..
LOL, I understand the benefit but what I’m saying is NOTHING else on the bike seems to have power when it’s off so it seems odd. Yes, these do have an independent power cable attached to the battery so I guess they have a continuous feed of power but I’m thinking they could’ve made them turn off faster. More than two minutes seems a bit long. Doesn’t change anything for me just curious.
@@TwoIndians yes it's good to know why just to know.. i assume there is no switch.. forget that forgot who i was talking too. Lol
@@digbysdownunder yeah I think I'd be adding an on/off switch.
I like the bag lights a lot. Not so sure about engine bar lights. I kind of like the placement of the driving lights on the Pursuit. Don’t get into to much trouble while Barbara is gone.
there's def merit to your points. I'm usually a fan of the Indian products when it comes to electronics for obvious reasons but these worked out very well for me.
Awesome video / My only concern would be compromising the structual integratity of the crash bars (HUGE HOLE LOL) in the event of a an accident, thoughts...
Yeah I’d thought about that too but in every instance I’ve seen the bars tend to just bend backwards a little. I think they’d have to take a sharp pointed hit right at the point where the hole is to take advantage of the weakness and honestly I just don’t see that. I think the average drop or collision (even at speed) would still leave you well protected.
Love your videos!!! Have you installed Custom Dynamics (or any other brand) engine decorative LED kit? If yes, is the battery terminal in the front and have to route all wiring to the front rather than under the seat?
Thanks for the compliment! You do have to route power wiring to the battery for a light kit. I’m planning my install now for this.
@@TwoIndians Awesome. Let me know how your install went. May be we can meet one day at the Ace Cafe. Thanks.
Couldn't you just cut the connectors off then splice back together after fishing the wires through the smaller hole?
Hey Brian since it's been a little while what are your thoughts about your RVS performance tune?
I thing has changed. Bike is running terrific!
Hi
I’ve seen a lot of videos of yours and I can tell you admire Indian bikes which I love.
I just want your opinion if possible, I’m trading in my F6B with an Indian, I like the challenger dark horse the most but it’s not available where I live. They got an amazing chieftain elite which is super expensive and can’t afford and they offered me a brand new 2018 Springfield dual tone color at a crazy price. But I’m a 35 years old guy who doesn’t like chrome. So I’m planning to take this bike and paint whatever can be painted powder coated paint and buy the required black engine part covers to make it alike the dark horse (which they don’t have as well) or just simply don’t buy it and keep looking for a second hand. Appreciate having your thoughts about that.
Curtis Sawyer with Indian Rider Radio took a chromed out Elite and blacked it out too, top bottom, looks amazing. Personally I would probably wait for what I want. As you know I have a Springfield and a Challenger and if you forced me to pick one the Springy would have to go. The full fairing is essential.
What is the color of the bike?
It’s called Maroon Metallic
Thank you. Your camera does not give it justice of the real color. I have not seen one in person with the color. I really like that. The Indian website site does not give ample view of the color.
Sounds like too much hassle to be honest. 😂😆😆
LOL, it wasnt easy, but then it certainly wasnt the hardest thing I've done either.
Looking like a clown car. Too much junk hanging off the bike. 👎🏽👎🏽
good thing i only care about my opinion and not yours! Wait til you see my underglow light kit, youre absolutely gonna love it! LOL