New update 1/4/2024: A lot of new parts are installed on this Honda giving it a factory look. The bike now features carbon fiber tank and other goodies. Check out the new video after you watch this one. Smash the like!
Thanks for great video man! When I saw all the brackets and spacers I was thinking " not really into adding all that extra jankity stuff onto the bike", but the final outcome looks awesome. Def the best re-style kit ou there!
That’s the perfect word janky. I spoke on this topic, but cut it out during editing to shorten length. Some one that wrecks a lot like FMX may not want this kit for durability reasons. The kit does feel solid once you torque everything down though. 👊
Wow that's a nice looking kit! It seems with all of the brackets and retro fitting it might add a bit of weight no? Either way, it looks darn good. Also may I suggest putting some clear vinyl or plastic underneath the zip ties on your number plate! Those Cycra plates are nice, but the zip ties always eventually dig in to your upper fork tubes, my '06 125 fell victim to that.
As far as the wieght goes it is probably a couple pounds heavier. The TX seat is more narrow and taller than stock. So it will change the ergonomics some. When riding, it feels twice as narrow as the wide Polisport shrouds. Good point about the zip ties, Ill do that. Thanks 2 Tapz !!! Triple T
Update: The new 2023 front lower fork guards came in today. This TXrace kit does not come with updated fork guards unfortunately. It would be a lot cooler if it did. But yeah, new videos are coming for ya’ll. 👍🏻
I been working on it for the past two weeks. New big HRC rotors today and bought 5 gallons of VP C12 gas fuel. I’m waiting on some new Core braided brake lines. The should have been delivered today. Then I’ll let it rip. This week I took off work to fire it up and ride for the first time since the rebuild.
6/21/23 Update: New parts were ordered today for this Honda. New videos coming soon with some test and tune. Don't forget to smash that subscribe button.
Looks like an awesome kit , however you should use 243 Loctite on all bolts before the bike looks 20 years older . Use a 1/4 drive ratchet and torque wrench on most M6 bolts .
Yo Pete, good Loctite tip. These fasteners are coming back out to get fancy washers tomorrow. I used a torque wrench putting on the phat head. Click click. 💪
@@TORKiT Good to hear mate , I'm not picking on you , I'm just passionate with the assembly side of things . I have been riding since 1975 and still ride today (thanks to God) there is nothing our Earth I like more than motocross bikes. Good luck mate.
@@peterb121 Amen Pete. It is in your blood too. My dad and I ride the dirt back roads at the farm. Dad has a 1981 XL180, we love Honda dirt bikes and three wheelers.
@@TORKiT That's awesome. My father passed away quite a few years ago , I miss him deeply. He was my inspiration , I ride with my kids on our own track in Melbourne Australia . I have done most stick and ball games , had modified cars nothing comes close to Motocross bikes.
So, the outcome looks great, even if it is pricey for essentially a plastic kit. My big question: how does it run after cutting off all the airflow to the air box? That's the main thing keeping me from buying this, and getting the polisport instead (02 CR250R)
Yo Airborne! A new video is up with me riding this Honda. You can hear it run on the pipe. This should help you decide which kit to choose with your airbox concerns.
This is a cool kit and I am strongly considering one to modernize my CR500 Hybrid (makes the bike look literally 20 years younger) but is there anyone else who feels that the silencer is too exposed / naked and a kit with slightly larger rear number plates would be better?
I agree. I saw a guy on Vital tuck his silencer but it was a 125 single mount. Small bend and a welder. Looks good but I got a carbon fiber Ti one to show. The new KTM two strokes it is more exposed as well. Sign of the times maybe? Thanks for watching MC.
The reason I chose TXrace over Polisport is because I prefer the way TX looks. As you can see I removed the Polisport kit at 1:32 . Restylng is for looks.
Yeah Thomas. First check out my newest CR 250 video and see if you’d like the updated look better. But on throttlejockey.com if you have the TX race Ridiculous red light kit I click on the 2024 CR 250 there is a checkbox for no F on the graphics. While purchasing in the comment section, you can request no F for a two-stroke. My new video explains the ordering process as well. Thanks for watching Thomas. 💨
I ordered mine for a 2023 CRF 250. In the notes put no F. Or if these are for CR 125 put that in the notes. Because you don’t want CRF on two-stroke graphics.
The brackets are aluminum mainly. The angles bent make it rigid. Especially the seat bracket it feels really solid. The piece under the front of the fuel tank is plastic. I think it was designed to flex some with the shrouds.
Good eye Brett. Yes, it is a custom order I asked of throttle jockey. I ordered the 250 graphic set with white backgrounds, just put "no F" in the notes.
I bought the aluminum shorty from Pro Circuit. Now I am running a Pro Circuit carbon shorty. I found it on ebay for a 2004-2008. It fits this 2003 model as well perfect. You can see it in the newer video. I ordered stickers from Pro Circuit for both sides like the newer models. Because the smaller new plastics expose the exhaust on the brake side as well.
@@juliansilva9220 that is the best part about this restyle kit. It is exactly a 2023 CRF 450 or 250. Factory OEM Honda plastic. So I ordered the 250 and told Throttle Jockey no "F" in the notes, just "CR" I hope this helps.
Good eye Clint. Yes, it is a custom order I asked of Throttle Jockey. I ordered the 250 graphic set with white backgrounds, just put "no F" in the notes. 💯
@@TORKiT I can’t get the purchase to go through and I have cleared up everything with my bank to make a purchase out of country and tried muiltiple cards did you have this issue?
True Big Sniff it looks way different. The rear number plates are small on the newer bikes. All these plastic panels are the same as the new model Honda 2021-2023 CRF.
New update 1/4/2024: A lot of new parts are installed on this Honda giving it a factory look. The bike now features carbon fiber tank and other goodies. Check out the new video after you watch this one. Smash the like!
Dude, this bike still looks beautiful! Good shit my guy!
The old TwT and MXVGforums CR from 2005. It’s crazy. I’ve had it about 20 years.
@@TORKiT I should send ypu my rm and see what you could do with that.
Man...kudos to you guys for making this kit. What a work of absolute art. Two High Fives and Two Thumbs UP!!!
Awesome Prayer 🙏 I’m pumped you love the Honda!
Thanks for great video man! When I saw all the brackets and spacers I was thinking " not really into adding all that extra jankity stuff onto the bike", but the final outcome looks awesome. Def the best re-style kit ou there!
That’s the perfect word janky. I spoke on this topic, but cut it out during editing to shorten length. Some one that wrecks a lot like FMX may not want this kit for durability reasons. The kit does feel solid once you torque everything down though. 👊
Dam!!! Looking amazing! Good shit Tork!
Yo Dirtman, you look good on that 625 Zook. I heard you out there brrrapppin it up.
Wow that's a nice looking kit! It seems with all of the brackets and retro fitting it might add a bit of weight no? Either way, it looks darn good.
Also may I suggest putting some clear vinyl or plastic underneath the zip ties on your number plate! Those Cycra plates are nice, but the zip ties always eventually dig in to your upper fork tubes, my '06 125 fell victim to that.
As far as the wieght goes it is probably a couple pounds heavier. The TX seat is more narrow and taller than stock. So it will change the ergonomics some. When riding, it feels twice as narrow as the wide Polisport shrouds. Good point about the zip ties, Ill do that. Thanks 2 Tapz !!! Triple T
@@TORKiT how much taller does does it make it
@@shootinturkeys Probably an inch. You can see a video of me throwing a leg over it. The modern seat has a slightly flatter profile than stock.
Update: The new 2023 front lower fork guards came in today. This TXrace kit does not come with updated fork guards unfortunately. It would be a lot cooler if it did. But yeah, new videos are coming for ya’ll. 👍🏻
Damn bro, the bike looks fucking sick 😍 You need to make a video how you rip this thing on a Track 🤠
I been working on it for the past two weeks. New big HRC rotors today and bought 5 gallons of VP C12 gas fuel. I’m waiting on some new Core braided brake lines. The should have been delivered today. Then I’ll let it rip. This week I took off work to fire it up and ride for the first time since the rebuild.
Raundies the video is posted with a first ride after the rebuild.
6/21/23 Update: New parts were ordered today for this Honda. New videos coming soon with some test and tune. Don't forget to smash that subscribe button.
Looks like an awesome kit , however you should use 243 Loctite on all bolts before the bike looks 20 years older . Use a 1/4 drive ratchet and torque wrench on most M6 bolts .
Yo Pete, good Loctite tip. These fasteners are coming back out to get fancy washers tomorrow. I used a torque wrench putting on the phat head. Click click. 💪
@@TORKiT Good to hear mate , I'm not picking on you , I'm just passionate with the assembly side of things . I have been riding since 1975 and still ride today (thanks to God) there is nothing our Earth I like more than motocross bikes. Good luck mate.
@@peterb121 Amen Pete. It is in your blood too. My dad and I ride the dirt back roads at the farm. Dad has a 1981 XL180, we love Honda dirt bikes and three wheelers.
@@TORKiT That's awesome. My father passed away quite a few years ago , I miss him deeply. He was my inspiration , I ride with my kids on our own track in Melbourne Australia . I have done most stick and ball games , had modified cars nothing comes close to Motocross bikes.
@@peterb121 Yes sir, your kids will have good memories just like we did. 😃
Looking good!
That Phat head set it off!
Your ready for shreddy!
We are going to tear up some freakin dirt Moto289. ✊
Thanks!
Nice of you for the super thanks Tonya!
So, the outcome looks great, even if it is pricey for essentially a plastic kit. My big question: how does it run after cutting off all the airflow to the air box? That's the main thing keeping me from buying this, and getting the polisport instead (02 CR250R)
Yes sir, the bike still runs like a champ. Revs to the moon, no performance lost.
Yo Airborne! A new video is up with me riding this Honda. You can hear it run on the pipe. This should help you decide which kit to choose with your airbox concerns.
Hey man! Been awhile now, was wondering if the durability of the mounts has been tested yet?😂 Ordered my kit finally!
hello, since I lost it unfortunately, could you send me some pictures of the manual please ?
Try to pause the video and take a screen shot. It’s not hard to install the kit once you get the rear fender on. I can help you out of course.
This is a cool kit and I am strongly considering one to modernize my CR500 Hybrid (makes the bike look literally 20 years younger) but is there anyone else who feels that the silencer is too exposed / naked and a kit with slightly larger rear number plates would be better?
I agree. I saw a guy on Vital tuck his silencer but it was a 125 single mount. Small bend and a welder. Looks good but I got a carbon fiber Ti one to show. The new KTM two strokes it is more exposed as well. Sign of the times maybe? Thanks for watching MC.
Looks an absolute nightmare! The Polisport Restyle can be fitted in less then 10 minutes. All those brackets, damn, no!!!!!
The reason I chose TXrace over Polisport is because I prefer the way TX looks. As you can see I removed the Polisport kit at 1:32 . Restylng is for looks.
Could you put the link to the graphics kit in the comments? Looks absolutely sick and is exactly what I’m looking for to do to my ‘03 cr250. Thank you
Sure man, www.ThottleJockey.com for the HRC 2023 they are $200. Updated discription for you Sagi Speed!
Can you point me in the direction for the graphics kit? I found the website but I could not figure out how to pick the right one for the tx kit.
Yeah Thomas. First check out my newest CR 250 video and see if you’d like the updated look better. But on throttlejockey.com if you have the TX race Ridiculous red light kit I click on the 2024 CR 250 there is a checkbox for no F on the graphics. While purchasing in the comment section, you can request no F for a two-stroke. My new video explains the ordering process as well. Thanks for watching Thomas. 💨
ths is real american muscle
🤘 For sure, rock on Hence! 🤘
How do u order the graphics… do you just order them for a new Honda crf450?
I ordered mine for a 2023 CRF 250. In the notes put no F. Or if these are for CR 125 put that in the notes. Because you don’t want CRF on two-stroke graphics.
@@TORKiT so you didint order that tx race kit option
Bitchn ride brother 🤘 can the seat cover be changed out w a throttle jockey seat cover w the hole n the rear
Yes sir, new seat cover no problem. Just but a hole where the bolt goes through. I been considering it as well.
How are the brakets are they aluminum or steel? Do they feel solid
The brackets are aluminum mainly. The angles bent make it rigid. Especially the seat bracket it feels really solid. The piece under the front of the fuel tank is plastic. I think it was designed to flex some with the shrouds.
Do you have a kit for the 2003 CRF450r?
Check out the TXrace website. I think they do have a restyle kit for you as well. Best wishes! 👊
What kit did you have on before the tx race kit and would it fit on a 99?
The old kit was called Polisport. It would not fit a 99. TXrace makes a 2023 kit for your 99.
How did you get your graphics to say “cr 250” instead of “crf”? Is it a custom order from throttle jockey?
Good eye Brett. Yes, it is a custom order I asked of throttle jockey. I ordered the 250 graphic set with white backgrounds, just put "no F" in the notes.
where did you buy the exhaust muffler?
I bought the aluminum shorty from Pro Circuit. Now I am running a Pro Circuit carbon shorty. I found it on ebay for a 2004-2008. It fits this 2003 model as well perfect. You can see it in the newer video. I ordered stickers from Pro Circuit for both sides like the newer models. Because the smaller new plastics expose the exhaust on the brake side as well.
Where exactly in the website of throttle jockey did you find the graphics
Under Honda 2023 CRF full decal kit. throttlejockey.com/index.php?route=product/product&path=67_68_380&product_id=444
@TORKiT where is the tx restyle kit under honda model & year
@@juliansilva9220 that is the best part about this restyle kit. It is exactly a 2023 CRF 450 or 250. Factory OEM Honda plastic. So I ordered the 250 and told Throttle Jockey no "F" in the notes, just "CR" I hope this helps.
@TORKiT Yes, thanks. This did actually help
How did you get the graphics for the new style to have CR? All the ones i see have CRF
Good eye Clint. Yes, it is a custom order I asked of Throttle Jockey. I ordered the 250 graphic set with white backgrounds, just put "no F" in the notes. 💯
@@TORKiT Awesome! Thanks for letting me know!
they look great
@@clintrobinson1269 You bet, I’m glad to help out. New video coming soon with some drone footage.
Did you pay 113 for shipping?
Yes unfortunately, I could not find anyone with this same restyle kit state side. Lucky for you it is tax season :)
Okay thanks haha
@@freeman425 buy now, ask for forgiveness later. 😆
@@TORKiT I can’t get the purchase to go through and I have cleared up everything with my bank to make a purchase out of country and tried muiltiple cards did you have this issue?
@@freeman425 Yes, I had to call my bank since the purchase is overseas. The bank has to turn fraud detection off while you make the payment.
Onde compro um kit desse, top de mais?
Buy it from TXrace. The company is located in Italy and is called TXrace. Use the TXrace website to order a kit for your bike.
….Freedomtown
Have you went by there recently? RIP Freedomtown. ☠
@@TORKiT its all housing now right?
@@Armenian Yessir, just what we need. 🤬
Bruh…
You thought I sold it huh. This ain't no 600!
@@TORKiT 🤣this aint no zippy tie pocket bike 🤣🤣🤣🤣
Thats a misery kit if you crush all asembely parts will bent! Try the polisport kit is bolt on with no adaptors.
If you watched the video at 1:28 I removed the Polisport kit off my Honda. Don't crash then haha. I see your point though.
Not really a fan of the rear end side covers. Just doesn't look right compared to the radiator shrouds. But still love it because 2 stroke.
True Big Sniff it looks way different. The rear number plates are small on the newer bikes. All these plastic panels are the same as the new model Honda 2021-2023 CRF.