Creality Halot Mage Pro 8K 3D Printer | Groundeffected.com
Вставка
- Опубліковано 27 сер 2024
- Creality sent me their new halot mage pro 3D printer. I am blown away by the capability of this machine i dont even think i can fully show how epic the machine is.. if you want to buy this machine it is currently on sale now check out the links
Halot mage pro: shrsl.com/42dog
UW-02 Washing/Curing Machine: store.creality...
Halot mage: store.creality...
Halot mage is on sale now.
US Strore: $40 off
DE Store & EU Store: €80.00 off
UK Store: ￡100.00 off
AU Store: A$60.00 off
CA Store：Can.＄50.00 off
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected...
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected...
🎨 Supplies: elementgames.c...
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
....
vm.tiktok.com/...
📌 Playlists to Watch!
Brush Control:
• Brush control
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my UA-cam channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
20 miniatures in 2 hours... crazy
Yea dude. Crazy is the only way to explain it !!
@@Groundeffected Wow, mind sharing some setting to print that fast. Got the halot mage 8k. But newbie in resing printing. Mine takes like 12h each print
@@Groundeffected Does the entire halot mage pro dish fit in the wash station?
I had the same problem with the wash cover. I added one of the provided stickers on the outside, lining up where the light is, and it worked like a champ.
Man so proud to see this channel grow from the start! Keep doing the good work man!!
Glad to see you getting more machines for review!! That says a lot about your growth and community!
Thanks my dude. Glad you get to see the growth and appreciate you being a part of it.
" My name is your dad".......kills me every time
Haha 😂
What aTrooper you are, no bug will stop you from providing 3D community intel on what is out there. Appreciate it man ! Get well.
Thanks my dude. No matter what the show must go on.
Your so right about the filter vs. heater.
Dude!! Even maybe have it as an option to select
I've had the older Creality LD-006 and the UW-02 wash&cure station from this video for a quite a while now. and i love them both.
the only complaint I've heard (not experienced myself) about the wash and cure station is that it uses 2 frequencies of light for curing, and one of them can discolor clear resin while curing if you cure for an extended time.
I've never used clear resin before and never had any issues with mine, so I'm unsure if its a valid complaint.
To be totally fair clear resin goes yellow when cured no matter what. Some people try curing in glycerine some in water but none of those ever worked for me because as soon as you let it see the real sun it goes as yellow as a bowl of pee pee hahaha
do i look like a kitty cat to you boy! hopping around all nimbly bimbly from tree to tree?!!
now you stop that right meow!
Hahaha 🤣
The air purifier will assist in eliminating odors and that's about it. Carbon filters can slightly decrease VOC'S from the atmosphere of a room, yet not enough to where it is safe. Good ventilation in a room is a must and you are correct a heater would play a better role with a 3-d printer than a carbon filter and fan.
I'm Hazmat and HazWhopper certified and I love your channel.
Creality makes amazing products, I had a CR10S it was a beast and printed amazing but I moved on from FDM printers, I just saw a video of a CR10 printing a full size lamborghini, it printed for a year and 3 months none stop, it eventually died, how crazy is that!! my only wish is that they produce a resin printer with a bigger print volume I think must of us that print big figures would appreciate it. great video!
I saw that lambo and yes I thought about it!! Hmmm 🤔 now I’m thinking about it again. Ffs dang you!! Hahaha
Great video once again, HalotEH Majj is a BEAST!
Get better soon dad! Thanks for the insights, a 3d printer is on my shopping list for end of the year, keep them coming! ⚡⚡⚡
I must be Your Mom because I love your videos.
I buyed it.... now i cant wait to start this thing...... Love Fdm but this is insane!
My man, ya gotta gove us more on this printer. Looks better than my Mono X from 2021
Dude this makes the mono x look like child’s play.
I've got the non pro version of this, its not a bad printer, but slow lol. The wash and cure station is straight trash from the factory. They did, however, send me a new sensor to replace the one from the factory and it works great now! I'd like to see some settings for the pro to get the nice quality prints with at least some better speed than the non pro version
thank you , just subscribed
Thank you for the information in this video.
I need to ask. Did you have any issues that occurred with this printer after posting this video?
Does it still work well?
So far so good man. I don’t use it daily but it hasn’t let me down yet
With this printer, Are you stuck with using only the built-in V2 print adjustments? Of will it accept V3 print settings from the slicer? Thanks.
I’m not sure what you mean? For now it’s only supported by their native slicer but I’m sure lychee and chitu will support the machine soon
WHICH ONE ?? Anycubic M5s - or - Creality Halot-Mage Pro - or - Elegoo Saturn 8k - or - ?????? ................ There are great options out there so which one??? Anycubic 12K & Auto leveling is impressive . Creality Halot-Mage pro has a autofill, tilt lid.
Hello your dad, thanks for the review.
Thanks for watching!
Ah a fellow .03 layer level bro :-) it is by far the best way to go, it is only a little longer but the results is well worth the time, great on big minis with tiny details, my tanks come out amazing looking, the difference is real. Also Pipermakes and Stationforge are great :-) I am also a massive The Makers Cult fan, Doing a 2000 point OPR army atm with The Makers Cult stuff.
Cool vid, thanks for the unvarnished opinion.
Can I print Spiderman figure like your videos on this one?
Great content and style, liked and subscribed!
Suffice to say, you'd probably do better to get a heater in your shop, as opposed to expecting a 3D printer to have a heated vat. On a side note: If they added a mechanism to blow you while it prints out your models, that would definitely be a notable feature!
To heat my entire studio for a day costs me an average around £5 a day and that’s only for daylight hours. Add extra £5 for the night time so it costs roughly£10 to heat my studio and print daily. With the small heater in my printers that I use currently it costs me less than £2 per full day cycle over a month that saves a ton and is waaay more beneficial than an air filter. Heat an entire studio or a small box ? I know what is more cost effective to me.
@@Groundeffected I work from home. It would be more cost-effective for me to only own like maybe 1-2 clothes outfits, and go naked the rest of the time, as to preserve those 2 sets of clothes that i would own. However, i'm a fancy bitch who prefers to where a different tshirt and underwear every day. The moral of the story is that being too cost efficient leads to a greater level of stress, anxiety, and other such nasty things. "Give me convenience, or give me death" - Dead Kennedys
@@geteavnroc2250 sure but when my bills for heating and electric was greater than the actual rent of my studio that’s where I draw the line lol
can you please list the settings you used for such fast print times for the minis?
thank you for this quick review! I need your true feeling about the quality and fiability of it, do you think this one is as good as saturn 2 or M3 plus? I was thinking to buy the saturn 2 for the ratio quality/price but this one seems to be a game changer! I'm just afraid about quality : do the air filter and the resin pump are solid and not gadjets to hype people? We don't have many feedback or reviews for the moment so it is hard to jump on it without fear...
Ok so honestly. The pump is friggen amazing. I mean it works and that can’t be said about the m3 plus pump which never worked nor did it work on the m3 max. Before this machine my favorite was the m3plus but now I’m torn. What I like about this creality is that I can take out that air filter and use that space for a heater which in my opinion is a billion times more useful than the filter since you’re just gonna open the hood and take a fat wiff of that resin everytime you open it which will be a lot since it can print so damn fast. Also this is almost half the price of the m3 plus I think I didn’t check latest pricing but I payed double the sale price of this for the m3 hope that helps you dude. Anything else feel free to drop a comment
@@Groundeffected thanks for your advice, I didnt think to put a little heater instead of the filter but you are so right this filter doesnt make sense for me ; if you tell me that prints are as good as on the M3 for half the price and less Time Creality just killed the game!!!! Maybe Elegoo, Phrozen or Anycubic will respond but I dont see how...🙄
@@danteinferno6513 dude if one of them does the heater and a camera that you can access remotely (that actually works) then they’d be a force to recon with.
@@Groundeffected I continue to collect some infos about this machine and I found some bad ones ; first there is a serious issue with broken pump's nose during the plateform leveling!!? It seems to be a design problem that requires attention because plateform moves so fast ! Then first users tell that there are software issues that must be resolved ... I am going to wait several feedbacks before buying it...🤨
@@danteinferno6513 fair enough let me add some info to your info. The halot mage pro hasn’t shipped yet.. there isn’t any halot mage pro in the publics hands at all for now. Also that refil nozzle is down by default and it cannot come up as it is clipped into place by the vat. So if you mount the vat wrong then maybe you might have that issue but there’s a very definite click when you push the vat into place. I have heard some issues on the halot mage but don’t confuse the two machines. Not sure on the exact differences but they’re not the same machine. Annoyingly they look identical hahaha. Good luck with your search dude.
hope you get well soon dad.
Thanks broski.
Lovely review. But I want to ask, does the build plate fit in the wash bucket?
I’m certain it does but I’m not at the studio now and I will check in the morning. If I don’t get back to you then it fits. If it doesn’t fit I’ll find your comment and let you know.
I guess it fits :) this was one of my questions :))) .. another question: do you think it is suitable for printing in dentistry field?
@@Groundeffected same question
Hey nice video, what is the most precise 3D printing machine in that price range? Thank you
so im not the only one whos uw2 is faulty, cant find any vids trouble shooting
Hello, first of all, I wanted to thank you for the videos on this printer. Then I wanted to ask something: how does the pump cleaning work? If I have to use a different type of resin for the next print, can I be sure that they won't mix? Or does the pump need to be cleaned after each print?
Hey, thanks for the great review. I've got the Halot Mage Pro shipping on May 17th but had a couple concerns that maybe someone can address. Listed on the site there are some common looking accessories, such as the Fast Resin that i see in your video, as well as replacement carbon filters. Neither of these are actually available for sale on their website. When contacting support they acted like they had no idea what i was talking about until i forwarded them a screenshot from their own site, circling both those products. They admitted they do not know when they will have Fast Resin for sale, and incredibly, that they will not ever be selling replacement carbon air filters.
Is there maybe something in the packaging to order the resin or filters, or are the filters generic where they could be sourced anywhere? Just feeling a little scammy to advertise these blazing fast speeds, with subtext saying you need the fast resin to do it (but we can't buy it) and their filter lasts 3 months, but you can't actually replace them.
Brand new to the resin printing community, so apologies if i'm asking dumb questions haha. Thanks in advance!
Hey dude. They mentioned to me that the fast resin isn’t available yet. I’m not sure why. I will do some tests with standard resins but in my opinion as long as the resin is not too thick you’ll still get good speeds, just seems like because it flows super well that it’s able to fill the cavity faster than the usual thicker resins. I’m sure they’ll have both those items for sale eventually. Sorry if you’re not feeling it but from my experience in the past I’ve not had any bad experiences with creality but also I’ve never had to contact customer services yet though…. Good luck my dude. Sorry I couldn’t be of more help
Just decided that I want to buy a resin printer(maybe this one) instead of a filament printer. But, my main concern is the mess and smell because I am going to put this in my room. Do you think I should be fine if I use water washable resin and put my setup next to the window?
So if you are worried about smell then stop because most new resins don’t smell that bad. But this machine has a ventilation system that has a pipe you can run out the window if you want. Really though you probs wanna put it in a room you’re not sitting in all day (even though I do this and am probably gonna die from it lol)
Hello friend, very good video, could you tell me where you could find the printer profile to load it in lychee slicer?
Words for the word God.
The word god approves
Sir jewellery print possible this printer
With some tuning perhaps but you probably don’t want rapid printing for high detail
How did you manage to get Mage Pro from Creality? Also, thanks for this review!
Dad, Hi, can you please tell me the source where you get all these STL models from? Are you paying for any subscription?
These are from station forge on patreon dude.
@@Groundeffected thx 🖤
Thank you for the review! Before I'm sold on this machine, I read on their website that they use that expensive CHITUBOX PRO software (albeit, 1 year free). Do you know if that's the only slicer that can be used with this printer ? Open-source too?
I see it is available in lychee slicer too dude. Just checked today
Do you have a webshop? Would love to support you :)
I do but it’s still kinda in progress link in my description dude.
I am interested in the professional magic harlot machine as my first resin printer but I also had some thoughts on having a heater on that as well.
Does the machine also have the capacity to print really nice quality too if I were to slow it down and print really fine?
I believe it will once there’s support on other slicers too then it should be easy to slow down and push the layers low and slow for crispy 8k resolution. I will do some tests. I wanted to test a slow print of a statue so check my insta stories this week I may try fit it into the schedule.
@@Groundeffected I believe they advertise it as coming with a free year of chitu box. The tango whatever slicer looks interesting but I cannot find anything about a free version so they probably don't have one. I kinda wish Prusa slicer would support more than just their resin printer without doing everything from scratch. I will sub to your channel to see more about this.
@@iamsobanned lychee did say they were not sure when but they were working on it too
@@iamsobanned UV Tools can inject new profiles into PrusaSlicer.
Nevermind what I said earlier. It still won't slice to other printers' format.
Hi, im a mage (Not Pro) owner. Can you Tell me, whats the best solution for speed an quality?
Find resin that is thin and increase lift speeds I guess. But in reality speed is not precision so expect some failures along the way
Always a good vid from you sir. Heres a question.. for someone who has never 3d printed. What resin printer do you recommend to start with. I want to print everything from statues to miniatures.
If I’m being completely honest most latest release printers are fantastic. This halot mage pro is big enough to do statues and to be fair it’s been literally plug and play for me first time that’s been a thing. Usually I need to do testing etc they gave it to me with a resin and said use this setting and boom just worked. If I were buying again for myself it would be a toss up between this one and the anycubic m3plus (that one I bought with my own money)
@@Groundeffected thanks for the advice, I was looking at a saturn 2 8k but if this one is more simple I'll look at the availability here in Poland.
@Lgbf Gaming you might wanna wait for the phrozen 8kS, which is releasing in a few weeks time. Its a desktop printer with "supposedly" 8k quality
I certainly am before I buy my first resin printer
Anyways, good luck on your resin printing journey, whatever you use!
@@HighBeanz I’m waiting for mine to come then I can tell you what’s up with the two of them!! The phrozen is a smaller machine though from what I’ve read. But I’ll give you the scoop once I know
@@lgbfgaming9217 as the other dude said there is the 8ks coming too and it’s very affordable. But I think it’s smaller. I will test that too and let you guys know!
-3 celsius in your studio?! Do you guys not have heat over in the UK?
We have heat but I don’t run heaters over night while I’m not in my studio since it costs a small fortune
For the wash and cure switch. What kind of switch is it? I have an anycubic wash and cure and that uses a sensor at the back. There is a sticker in the cover at that location because otherwise the sensor would look through the translucent cover. Do they use something similar here?
If so it should work even without cover by just holding a piece of paper in front of the rear cover sensor.
It doesn’t dude. I dunno what it is. It sees my hand but doesn’t see blue tac or paper it’s not like the anycubic one.
They really need to stop putting these lid sensors on curing machines. I've had to find the right tape to put over my sensor on my Mercury X because it doesn't like the lid either. Warning labels are enough, let's not take away functionality for a failed attempt at safety.
Dude. I know. Urgh. It’s the only let down.
Oh for sure! M'mam is dead so you've got a bit of an advantage.
Hahaha just a bit…
you just need to cover up the sensor on the UW-02
I mean I may seem a bit of a plank but I’m not dumb hahaha I even said in the video that it doesn’t work when just covering it.
@@Groundeffected sorry, didn't hear that bit, it works on mine, I just checked it now, covered with my finger and it started spinning.
@@Bunyip_Studios yea. That’s what I was saying works with a finger but not a sticker or piece of paper and I can’t just leave my finger back there lol
@@Groundeffected lol, no. Could try some bluetac or similar poster putty. You can get light blocking tape, it's what they put around the printer screen to stop UV bleeding through. If you've got a broken lid from an old printer, a piece of that taped in place should work
@@Bunyip_Studios this is what I am saying it doesn’t work with a piece of blutac or a sticker. Try it and see it’s a Magic switch.
Lekker words 🤣🤣🤣✝️
Why does it sound like he has a south african accent
Because he is South African haha
First
First ….. butt
dislike for thhe burps
Nothing magic about a bucket you say? Well my ex gf would beg to differ....... Work that out for yourself
My maths is really bad…