You deserve more views trying to acquire a 4.0L foxbody myself to 2jz gte with a single turbo or n/a conversion to single turbo. Appreciate the informational video 👍🏼
really great to see the 1jz running smooth im currently wiring in a fueltech ft550 on a 1jz vvti swapped toyota cressida.. is it possible to get a base map for the stock 1jz setup my next upgrade would be the 8hp transmission
What did you use for k-member trans and mounts? I'm also in Ontario. And thinking about going 1jz in my 79 fox restoration. Just finshed my restro mod brakes rear end suspension etc. I have a warmed over 306 but want to do somthing different over the summer. I previously built a 500whp 89 supra 7mgte back in the mid 2000s. And would love to go 1jz as a possibility.
1J and 2J’s are pretty pricy these days. Your gonna be into it for about 5K on the motor alone plus ECU, Trans adaptor, custom shaft and fab work. You might be best to look at a 1JZ GE (non turbo), they are cheap and you can boost them once you get to that point
If it’s stock she’s probably making around the same. Those stock turbos are the major limiter and I have buddies who have done an external gate mod and it has brought power up to about 300 wheel.
@SteveDoesStuff89 yeah im not stock, i have a gtx3582r turbo at 15 psi controlled by a plug and play MS ecu.. i tunned it myself but its not how i want it. Awesome car by the way, not a ford fan, but i love those particular mustangs.
@@SDSGarage89hey bro your car sounds killer! I've recently installed same setup on my stock 1jz vvti and having a hard time with the tune... by any chance will you be willing to share your map with me ?🙏
Brett tuned my 1jz supra last summer, great guy great service. 👍
Good pacing, cool edits, clean shots. You deserve wayyyyy more views man keep it up
You deserve more views trying to acquire a 4.0L foxbody myself to 2jz gte with a single turbo or n/a conversion to single turbo. Appreciate the informational video 👍🏼
Thanks brother. Best of luck 🤘🏻
The turbo flutter with the wrench drop lol
Just put a screamer pipe on the stock turbo and you ll reach 300
really great to see the 1jz running smooth
im currently wiring in a fueltech ft550 on a 1jz vvti swapped toyota cressida.. is it possible to get a base map for the stock 1jz setup
my next upgrade would be the 8hp transmission
Not 100% sure if Fueltech offers base maps for stock setups
fox body jz i dig it 🤙
What did you use for k-member trans and mounts?
I'm also in Ontario.
And thinking about going 1jz in my 79 fox restoration.
Just finshed my restro mod brakes rear end suspension etc.
I have a warmed over 306 but want to do somthing different over the summer.
I previously built a 500whp 89 supra 7mgte back in the mid 2000s.
And would love to go 1jz as a possibility.
Factory k member was modded to accept the JZ, just solid mounted. Trans has a custom mount for the Z32 Nissan trans but it utilizes factory mounts
What’s the cheapest way to get one of these and make this setup? I wanna do this to an 1982 foxbody with an i6 200.
1J and 2J’s are pretty pricy these days. Your gonna be into it for about 5K on the motor alone plus ECU, Trans adaptor, custom shaft and fab work. You might be best to look at a 1JZ GE (non turbo), they are cheap and you can boost them once you get to that point
The GM Atlas 4200 I6 is cheap and potent. Look at Nivlac’s build series to see how awesome they can be
What clutch master set up? And is it front or rear sump oil pan?
Wilwood clutch master and rear sump motor
are you running a T-56 or R154 transmission?
Z32 5-speed from a 300zx
I would love to get my 260z 1jzgte swap dynoed
If it’s stock she’s probably making around the same. Those stock turbos are the major limiter and I have buddies who have done an external gate mod and it has brought power up to about 300 wheel.
@SteveDoesStuff89 yeah im not stock, i have a gtx3582r turbo at 15 psi controlled by a plug and play MS ecu.. i tunned it myself but its not how i want it.
Awesome car by the way, not a ford fan, but i love those particular mustangs.
@@HotGritz910 stock manifold?
@SteveDoesStuff89 nope, its a ebay t3 tubular mainfold i got many years ago. Im using 44mm on3 wategate as well.
@@HotGritz910 that should be pushing some good power. How has the eBay manifold held up? Just picked up a CX T4 manifold for this
Steve is fasho doing stuff how does this have such low views 😯
Maybe i missed it, but what EFI system are you running
Fueltech FT450
@@SDSGarage89hey bro your car sounds killer! I've recently installed same setup on my stock 1jz vvti and having a hard time with the tune... by any chance will you be willing to share your map with me ?🙏
Ortiz Knoll