Harbor Freight 29gal After Cooler Install, (BONE DRY AIR)
Вставка
- Опубліковано 11 лют 2019
- How to install an after cooler on Harbor Freight 29gal belt-driven compressor for BONE DRY AIR!
EDIT
Update, the compressor oil drain plug is actually m6-1.0 with a 5mm hex head. And recessed back. Instead of messing with it during the break in process I ground the triangle on the support beam.
After doing a bit of research more into it after many comments not liking that 😂😂
I found a few parts that I’m ordering and a valve.
Shown in this video here (Thanks Will!)
• Harbor Freight Central...
M6 to 1/8npt adapter www.mettleair.com/store/brass...
I’ll be doing a new video showing that soon and after a year and a half at that time when I move into my new house with out building in about 4 months.
Video 2
• Aftercooler Compressor...
Edit: Going to make an updated and shorter 2.0 version, but keep this up for longer in-depth version. Link in video for 2.0 when available!
I have run the compressor in summer with after cooler and float valve water trap and have never had water drain out the bottom of my tank.
Also see how I added a 20gal auxiliary tank to my setup.
To buy:
High temp hose (x2) amzn.to/2NGEIpK
After cooler options B&M 70273
www.jegs.com/i/B%26M/130/7027...
B&M 70266 also an option.
Subscribe!
___________________________________________________________________________________________
Recommended tools on Amazon:
Best hose reel (Flexzilla): amzn.to/2VsLXnH
Cheaper option, swivel hose end (Flexzilla) amzn.to/2EFFT5D
Great compressor oil: www.pegasusautoracing.com/pro...
Planning to upload an update video with before after temperatures on tank, before after of heat that the upgraded comp oil reduces, and with new plumbing up front and hose reel review once I get them. Links will be added to video for that!
ua-cam.com/video/M5F7eyJBKpM/v-deo.html
Moving into a new place with a 30x40 outbuilding shop, will do an updated video after!
You should have just put on a short pipe extension nipple, instead of chopping the frame.
Thanks for showing your upgrades and sharing your knowledge!
The HF black and red 50' 3/8" hose is fantastic. Husky even uses the same OEM for their abrasion resistant 3/8" rubber hose
I like the way you planned it all even though you planning on upgrading in the future, but I also got one like it but haven’t opened it yet because of space issues. But I definitely congratulate you for your time & effort to show us that you don’t always need something big to do the job. “Save $ guys & do your homework as always”. Damn good example here 🇻🇮
Never reduce the flow,,it's 1/2 for a reason , you will shorten the compressor life by reducing the flow from back pressure
Something I learned a few years ago here on UA-cam about running the main air outlet tap as in where you would connect your hose or hoses to go to your air tools is that it's best to run your pvc or steel or brass line up high on the wall and then from there run it at a downward angle for say 2 or 3 ft, to wherever you want the level of your main line at to tap in with your air outlet fittings, and put your water separator and filter there, then from that point run your line along the wall level and put your outlet tap somewhere along in that point or if you want multiple outlets to be able to connect your air hose at different points along your garage instead of running a long hose from one outlet all the way across your floor then you run your line as far along the wall that you need to.
To try to make my point simpler what I'm saying is that the air and moisture that exits out of your compressor needs to run a fair distance, like say maybe 6 ft, or more, before the water condenses and separates from the air to be able to drain into the water separator more effectively, if the separator is too close to the compressor outlet the air and water remains a vapor and the water doesn't have much of a chance to separate. Running the line at a downward angle for a distance and then tying your separator/filter in at the end of that run at the point where you'd level the line back out helps because the water will separate and then run downhill into your separator at that point, then from that point, from the separator you can run your line level along your wall and put your air hose outlet tap or taps from that point on.
I realize that I rattled on for a long time here about it but sometimes it's difficult for me to be able to explain what I'm trying to convey in a few words. I hope I made sense here, I personally haven't set up my shop like this yet because we're still renting a house but when we buy one hopefully in the next year or so I'm most likely going to try to set it up this way. Anyway, I like your ideas here, pretty dang nifty. 👍
Why not screw a pipe into the drain plug and have it stick out .
Ringo Gingo thats exactly what i was going to comment!
He said the drain valve was fouled up @ 01:31. So he upgraded.
The oil drain plug? The things too tiny I tried to find a way to extend that out (like the tank drain plug) but couldn’t. It’s tiny so I cut the frame a little
Yes, do your crankcase oil plug the same way the tank water drain with a ball or gate valve. Look for 1/8 NPT nipple & ball/gate valve.
@@gunsandgaragegear601 you can find that sized Nipple in 2", 3", 4" & 6" lengths at Fastenal & McMaster Carr, so you can extend the Oil Drain out to where it's convenient and not so messy.
That would be an after market transmission cooler. With 1/2 pipe threads. And your oil drain on the compressor you may want to take out that plug install a pipe nipple of any length that gets you out to a more easily serviced position then cap the end. Making it far easier to drain the oil without making a mess
Bring it closer to you or tunnel to it. French drain? Lol..Still not enough clearance not to be a pain.
I stopped after that. But 1/2" definitely aftermarket unless you're working on an Allison. Seems overkillish, however those auxiliary coolers were fairly reasonable even from the Dealer. I just know anything diesel related can easily quadruple in price.
100 % agree with you, i have 3 air compressors at work and 2 pressure washers that we change oil every week on, i did what you said put short nipples on and a ball valve works great and no mess, get a very small bucket and hang it on the valve and open valve so easy and close valve and use a bottle that you get at a rest for ketchup and squeeze the oil in, NO MESS
I used the card board from my US GENERAL top box. To make a sound damper box on top of my Craftsman compressor. Works great lowering noise levels. No cost hack
U have a pretty cool set up and great after cooler nice job
Great video... one of the limiting factors to get me to start using my plasma cutters. Dry air. No hurry, though I really do like the simplicity and cost effectiveness of your design. Definitely very inspirational, thanks for sharing. Liked, commented and subscribed.
Awesome very well explained and knowledge gained the efficient way .Simple and practical .well done .makes a lot of sense
Awesome video man, thanks!
This is the same compressor I have. It is so much quieter than my old one. I used the old tank for extra volume after my drier system.
That was definitely a great idea. Very thorough and explained in very detail. Thanks and great job.
That's a great setup my dude! I kept messing with used compressors but the rusty tanks always had me worried. This is a really good fix for that.
mindblown...great thinking!!
Great thinking and upgrades! Practically speaking, you almost never have to change compressor oil because there is no combustion byproducts. After cooler must be rated above max compressor pressure. Even though you don't get tank water, keep daily drain habit up because in warm climate that might increase. During once recent garage repair, my compressor ran continuously, I discovered loads of tank water. Any water left in tank can cause internal corrosion, making dangerous tank. Never buy/gift used compressor w/ old tank, because you don't know how tank was cared for; it could be ticking bomb. Work safe.
Good point I never thought of rust inside he tank weakening the tank...and POP.
I ran a 3” nipple with a 90* pointe downward and a plug for the oil drain. No cutting required
Great vid. very informative! Would love to see an additional video of how you trained the beaver to cut that frame...
the best way to separete water before it goes to the piping is to keep the tank cool and, as much as possible, install the compressor air intake somewhere it picks up the dryer air as possible.
Nice job. I'm looking at a Menards with similar flow but oil free and plan to do this to it.
Nice Build!👍
Pretty cool idea
Nice Frankenstein job...looks like it should be in a Mad Max movie...
Vee-in-nYc lol thanks. Works great I’ll post another update video when we finish moving into our new shop outbuilding in about 4 months.
Not the prettiest plumbing job, eh. Could have all been done with copper line... get even more heat dissipation.
Just wanna say I've had the loud 21 gallon for 8-9 years now. Biggest issue is the factory nipple and regulator choke it down to a 1/8" output. It's great once they're replaced. Wish I had the money for this one back in my 20's, but it definitely wasn't built to be thrown away after a year or so.
I like your setup. Attaching the aftercooler to the compressor is a great idea. I have a full sized condenser set aside to incorporate into my own setup and it's been years now. LOL I haven't done anything with it yet but I've always wanted to upgrade my 21 gal for the 29 gal also.
Thanks for the motivation.
Rob's Wrenches absolutely the 29’s the way to go, even stock
The transmission/oil cooler helps remove water and also increases cfm because heat=increased pressure . Soft copper line and flare fittings are a great way to plum it up. It's plenty strong for the task. And will further aid in the cooling if the air. Also if u were to make a shroud to wrap the edges if the cooler and end close to the fan/ large pulley it would pull more air. An electric fan is a easier option.
The CFM is limited to the pump output, the cooler has zero to do with CFM unless it's restricting the actual flow.
I was thinking the same regarding I'd most likely use copper piping to help further cool and I have plenty around. I was also thinking about using and old steel compressed gas tank inverted and modified to make a cylone filter to first remove water. Not certain I'd require... though that was the original plan along with more copper pipe to make the heat exchanger versus purchasing. I like this concept and paradigm of thinking being more compact.
I extended mine with A brass 1/8 tube and a treaded coupler where I screwed in the bolt
Great job
I bought a Husky 60 gallon two years ago and am finally getting around to adding an aftercooler. To anyone out there who has a compressor, water in your air will destroy a tank and tools. After cooler will save you lots of frustration.
Brother's Forge amen
@@gunsandgaragegear601 I used a roll of 1/2 inch copper tubing coil , from compressor and put 1/2 inch separator before the tank and,,, dropped my air temperature 100 degrees.. it's 25 ft of coils,,,best way I've found
Damn. Smart!! Great vid.
i basically did the same thing... works amazingly well.
Great idea this is 👍
Like your design concept. Can you create a line flow diagram for your set up. good job explaining your set up....
I may do this on my 60g Kobalt. Not a bad idea to preserve the inside of your tank! Thanks for sharing!
I have a 7 hp 60 gallon and paint on occasions. I have tried so many water separators and was about to build my own decedent dryer. I am definitely going to try it your way. Thanks for the great video
How’s it working for you?
Did you get around to it?
All you need is 120$ sharpe dryer
You're gonna get water in the bottom of the tank no matter what, just part of the process of compressing air. The cooler isn't removing moisture from the lines, its just preventing it from turning into water. You need good traps and a dehumidifying machine if you want to paint professionally. I work in a shop and have seen how they run those 500+ gallon tanks. They have dehumidifiers that are about the same size of the tank. What your cooler does is effectively let the tank store more air per cubic inch. This is how two stage pumps work, one pump compresses air a first time, feeds it through a cooler, then compresses the air a second time to make it extremely packed. Which is how those big pumps can push so much air, because they literally compressing air several times before storing it.
Try adding an intake muffler. Brings the decibels down. Did it to mine and much quieter. Pvc piping elbow, cap, steel wool and some filter element. Can aim the piping to the floor or any other direction to reduce noise as well.
I was thinking this on my 5 in 1 ridgid.
Shop i worked in had like 4" pvc intake routed outside. It was awesome
Link man... please offer a link to such muffler after making a suggestion
@@anthonyrochon3907 Dude all you have to do is do a search for compressor intake muffler. Dont be lazy do your own research.
@@thisone. okay
Nice job.
Extend the drain pipe like you did and just drain it daily. Then just use a water separator on hose output. A good quality one removes basically all water on output. The tank is strong enough to handle a bit of water in it. Hell of a lot cheaper. I also paint with my air compressor. So can't have water on the air. Never had issues
Nice setup...going to do the same..more or less
Wouldn't it be easier to get the big 2 phase compressor and do all iron piping through out the shed with auxiliary tank of higher compactly ? And have 3 filters?
Now I know what Rube Goldberg's air compressor looks like!
I like your idea to cool the air before get to the tank. Can I use the Fin radiator cooler instead of after cooler? And why you choose the belt driven air compressor instead of oil-less (belt-less) compressor?
Just a quick note, you mentioned stepping down from 1/2 to 3/8 right after the motor, bad idea if that is the case. You essentially created a bottle neck which will steal cfm down pipe. They sell 1/2 transmission coolers (eg derale has them) and you could have used flexible 1/2 copper (sold at the big box stores) to connect to the two and not affected your pressure downstream.
Also creating heat In The bottle neck
Pressure and volume (CFM) are two different things, changing the pipe size has zero effect on pressure but will change the actual flow rate CFM.
I did this exact thing on my kobalt 30 gallon but used hydraulic lines as my air lines.
The 21gallon sounds like an oil less compressor , wouldn't have one of them !!! :-)
I think it has less to do with oiled vs oil free, and more to do with belt drive vs direct drive. Direct drive compressors have to spin a smaller pump faster to get the same output as a belt drive.
Nope that 21 gal was oiled also.
This is why we need to oil our air tools after every days use.....water!!
I am not sure if you can add the CFM of compressor and a tanks. CFM calculations take in consideration the pump capacity, tank capacity, the hp of the motor and time it takes to fill the tank. If you have two compressors working in parallel then yes you can add the cfm's. Great work, Thank you!
CFM rating on the compressor is at the input side of the pump, not the output to the tank. Cool concept 👍
I’ve done a few tests for how long it takes to fill and it seems to be between 6-7cfm iirc. Works good enough for me and runs all my tools!
CFM rating has zero to do with the inlet and is 100% based on pump output.
I need one of these setups for my everlast plasma cutter rig.
Todd Paulsen yes you do that’s what a lot of guys running these that I got the ideas from have it for.
@@gunsandgaragegear601 Thanks for the video. I'm finally going to make one.
Great idea to preserve the tank. Is that cooler really rated for that much pressure though? It looks like a regular transmission cooler, and those don't run much pressure, if any. I've got a bigger 5hp 60 gallon compressor, and this kind of thing seems like a good idea to keep water out of the tank for sure.
I was recently given one of those it had a bad switch I replaced that but it seems like the threads at the bottom is fine threads and I wanted do something like you have to drain the tank where did you get a fitting to match or it's just me not seeing right
if you had noticed on the gas compressor at harbor freight the pump had a pipe to drain oil from the same pump as yours. i dont know what part number is. im thinking of buying the 29 gal air compressor . hows yours holding up. thanks.
I added a 1/4x8" extension to my drain valve with a ball valve - works well (don't have the same compressor but my oil used to leak on the pump when changing also).
AN this one seems smaller than 1/4, I brought the plug to HD and Lowe’s and no one had a pipe that small to extend. So plan b was to make it more accessible for a funnel.
I wish this post was active - I have questions on substitute hoses since that link is broke and wondering about the float valve. If the float valve was added or if it's available as an option on the water collector?
I just drain my tank daily, before I leave my shop I turn off the compressor and open the drain valve. Costs me $0. I do run 4ft of desiccant lines on each outlet though, they change color when they’re needing to be recharged with a 45min cook in the toaster oven in a tray. Here in Los Angeles that’s about 2x/yr unless we get a lot of rain. Each of my sewing machines has an oil/water separator on the inlet anyhow, just in case.
Weekly/monthly shop maintenance schedules keep things tidy and in good order.
I’m running a 26gal “quiet” Kobalt vertical tank compressor. Not in need of high cfm, but the maintenance principle is the same
what kind of desiccant lines are you running?
It may not cost you anything to drain your compressor, but it takes power to fill it back to the pressure you had. Solar panels put our electric bill at $65 per year for a 2000 sq ft house with multiple ac units, in the Inland Empire, but I don't drain an 80 gallon tank, or the 60 gallon tank in the other garage. My auto drain runs every time the compressor cycles, so it only goes off and makes sound and wastes air when I have the compressors switched on. The other maintenance is good. I use regular water air separators down to 5 microns, then M30 paper filters down to 0.01 microns to get the rest of the water and oil. It keeps the air dry for the plasma table and tools, but I also use a disposable filter inline right before the whip to my powder coating gun. Luckily we don't get a ton of moisture in SoCal.
Can you put 2 after coolers ? Maybe 1 on comprwssor and one after a filter down the line for someone like me with 80 gallon compressor? Here wisconsin is humid
I did something like this many years ago when i started painting cars and just needed to shoot a bumper. But i have great advice from the compressor snobs that are auto painters 😂. Go to your local junkyard and look for a xj jeep Cherokee and pull the ac compressor. Do a grease conversion and drill the outlet a few bit sizes bigger weld some bolts onto that base and get a 4inch pulley for that motor and attach it all together with what you have and youl have a great much quieter 15cfm compressor. You also could look for those Volkswagen vans from the 90s that use the bigger version of that pump as you do have a 2hp motor then you get about 20cfm. But the jeep ones are plentiful and cheap. Lmao my shop has actually ran on a gas powered 2 stage using 3 of these pumps for about 1 year now. I still have my small one unit compressor hooked up to the system and use it 2 yrs later when i dont need the air of the gas compressor. It will hold 120psi while painting a whole car as long as its just me using air after all.
@4:03 Pressure washer hose good to 2000 degrees?? PsI, sure. But will it handle high temps?
I found one, 30 gal Kobalt $379 on sale, 155 psi vtwin compressor unit. All parts replaceable
Lowes. Highly recommended
Buy it use it less connections less problems. Other than painting or sandblasting most all mechanic tools are battery powered, great for blow drying Safety Kleen off parts if need be.
Jimmy still more money. Also not belt driven.
@@gunsandgaragegear601 Mine is belt driven with oil filled V-twin compressor cast iron made in America. Rated at 155psi shuts off at 160. Had it for 7 years working on cars and jeeps out of my garage. Only problem was I had to replace the safety valve this year. I do like the fact that your a thinker though.
The after cooler is a great idea except is that after cooler you are using made to hold the air pressure of the air compressor ? If not it could be dangerous if it explodes.
It's plenty safe
Air just flows through it. It doesn’t hold it at 130psi or anything. It’s safe though.
The cooler can handle 150 psi?
Do they make an after cooler for nostrils?
Do you have a part number for the cooler?
Propably the SMC waterseparator filter after the Cooper doing most of the work here. Mostly would work allmost the same without the aftercooler.
It’s a big difference. The heat at the top fitting in the after cooler is like 300 degrees. It’s like 70 at the bottom fitting right before dumping into the tank.
What psi can the cooler handle?
Ok thanks brother
Would really help for use of a plasma torch. Damp air kills them, good job
The transmission and engine oil coolers I looked at are rated at 125 to 150 PSI. My compressor shuts off at 125, so there is no safety margin.
An Air Conditioner coil would be better since they are rated well over 200°. Automotive coils would come with fittings. A coil for a small window unit would work, but will require using compression fittings, or use the solder for AC systems (not plumbing solder).
It doesn’t actually get 125psi in there I don’t think but. 5 years later still works.
With out watching the whole video. I stopped as you said “ second thing is “... You could have extended the drain port with a nipple fitting/cap long enough to help access your oil drain intervals... Just a simple add on to not have to cut into your compressor mount... Greg
It was a very weird size. But hindsight I should’ve done that first. Just looks ugly but it did the job.
What I don’t get is that the water will be in the air regardless of temperature? The only thing that’s working is that you have the filter that collects the water right after It condenses out right?
This is correct. You can't get every drop of water, but the first stage water trap catches alot and further up the system going into the line you will get another moisture trap/dryer do the rest.
Pressure washer hose that's good up to 2000 degrees? Please tell me more.....
Lol
That is an absolutely Genius concept! However, it may have some room for improvement. I am currently in the process of copying your design ( i.e. parts are in the mail to me now ) I believe to put it bluntly, you over-complicated your set up. Not to say it doesn't work for you! But I require high CFM, the flow rate on my tools is around 10 CFM @ 90 PSI meaning every fitting has to be a minimum of 3/8" inner diameter, where 1/2" would be ideal but may not be easy to find all the fittings I need and swapping back and forth from Army/Navy to M/F (NPT) I'm gonna try and simplify it. Can let you guys know how it goes... Shipping is slow, probably a month away from the hands on part of this adventure.. I just got a brand new compressor, so from day 1 I'd like the tank to be bone dry, its also easy to see if any new rust forms because its clean inside at the moment.
Did you make a UA-cam video on your revision ?
Someone had an idea and a pot of coffee !
thinking about doing the could that system paint a whole car anyone knows of this compressor hoteche and is it any good
Could the second hose on the output side of the cooler just be a standard air hose or dose it need to be the high pressure heat hose?
It could be normal
One thought I had is:
Aren't you altering the cooling of your Compressor? Seems to me it would be blocking cooler air's passageway to the pump.
No
Great set up! The link to the blue high pressure hose wont work unfortunately. would you be willing to share the product info for those?
Sorry. I don’t get notifications. It’s just any kind of hose you can use that’s high heat. You can also use copper pipe.
on uouroil drain why didnt you make a pipe extension
Could you have used a pump to remove the oil instead of using the drain plug?
You should’ve added the drain extension like you did for the oil for the compressor. That’s what I did with mine. It’s not like that mine is a kobolt from Lowe’s. I have a 60 gallon air compressor with a two-stage pump and I have the same tank that you have plugged into my 60 gallon as a extra air tank.
You’re right.
Just extend the drain with a piece of pipe. Hell of a lot easier
demoCRAPS suck find me an 1/8” extended piece of pipe that is one side male and one side female to put this endcap on.
@@gunsandgaragegear601 So diy th e pipe..
Check that ua-cam.com/video/32pzriZO1xc/v-deo.html male and female, and keep pipe threader to your toolbox for any future work.
Thanks
If u extend your intake from your air compressor, run the intake to the exterior of your garage to where it is not sucking air from the room its in but piped to draw air from outside. It would be much quieter. I ALSO HAVE AN EXPANSION TANK ON MY 26.. MINE IS FROM LOWES & I CALL IT A PIG BECAUSE IT LOOKS LIKE A PIG!!!!! P.S. I GOT MY AIR COMPRESSOR FOR $68. IT WAS A RETURN...
4:08 is 2000 PSI not 2000 degrees. lol. Otherwise, the whole thing would be a melted blob on the floor.
Oby-1 you’re right it’s 4000 PSI actually. High pressure water pressure hose. But it is also 200 degrees rated. And has held up great.
@@gunsandgaragegear601 Having sold hyd, pressure, LP, NG etc etc hoses for yrs, that normal duty pressure washer hose will brittle over time due to heat
Tom Brown which hose? Blue one?
@@tombrown1032 so what hose do u recommend coming out of compressor?
@@organicvids coming straight from compressor head or manifold, always use copper tubing
is the cooler still holding up. also where did you get the filter the return of the cooler back to the compressor tank. Great job by the way.
hoxha34 working fantastic after a year now. The filter is just a universal radiator cooler a friend gave me
The setup i would have if i lived in the US, considering how cheap stuff is there buy two small compressors or one big one for 1k and have 12-17CFM with a massive tank or buy second hand commerical and never look back.
I went the commercial unit. 80 gallons with a real 5hp motor and a pump the size of a harley motocycle engine. It is a westinghouse air brake company pump, which became leroi and then dresser company. The design was used for the brakes on trains and for commercial shops. $750 from my neighbors field and a week of pestering to get that one and not the other brand he had hooked to his shop. Luckily I researched the compressor and found out it is pressure lubed and parts kits are available still. It would cost around $3,000 to $6,000 for a new unit built with a pressure lubed pump. It is rated at 17.3 cfm at 175 psi and a little less at 250 psi. It is making 20 cfm based on how fast the tank fills. 5.5 minutes from 0 to 170 psi on an 80 gallon tank. It is perfect for a serious 1 person shop and runs a plasma table and blast cabinet with the big skat blast tips.
Better than making a DIY water trap with vertical lengths of pipe?
You could build the whole set up with copper tube, a bender and / or soldered fittings.
Frankencompressor but I bet it works well lol
telling people they won't have to drain their compresor any more is a good way to wind up on national news / UA-cam Fails collections, even if you rig your cooler between compressor and tank.
I have that compressor I just felt it wasn’t big enough that’s why I got a 60 gallon from Lowe’s just under 600 bucks three years ago I got free delivery and 10% off if I got their credit card after I got the compressor I paid off the credit card to capitalize on the 10% discount and the free delivery. I did put an hour meter on my compressor so I know how many hours it’s been running when it shuts off it stops counting even if there’s no electricity for whatever reason it does not lose the time that it has ran.
I have the same compressor just bought build to 145 max psi is that normal
mabrook almahfali should go to 150, I think you can adjust that under the plastic cap by the on off switch
Good idea but if you use air get some air 60 or 80 gallon , I’ve had my compressor for some 18 years auto drain and never had a problem although I’m I. The market for a new one thinking Quincy 80 gallons 71/2 hp pricy but specifications are great .
Jerry PEAL don’t need that much.
Are you sure about two compressors combined will double CFM? The thing that keeps me from buying the sandblast cabinet is that it requires SOO much cfm (12.0+) to operate.
Yes. You can run two compressors in series basically. Or maybe it’s in parallel. Idk if that matters but u do know plumbed correctly yes you get that cfm. Look into it.
OP: do you have a source or link for these blue short length high pressure hoses? I'm in need for these but don't know where to look!
Did you find a hose in looking for one now also
Look up air whip hose...
I got these from a pressure wash supply company. Steam hoses.
Copper tubing will work too.
:You can use PEX-
will this after cooler work for a two-stage 80 gal compressor
Fred yep
Hi fred. You need to check the pressure rating of the cooler is high enough. Big issue is many people use fluid coolers like oil coolers. Fluid ratings are about 4x lower than compressed air ratings. Stay safe
I haven't set mine up yet , but thanks for the info.
@@fvg3401 sweet as. I used dearle tube and fine cooler. Rated at 400 psi. Hope it goes well. Its a very worthwhile mod to do.
Didn't need to cut the notch for the oil drain. Just put on a longer pipe like I did and that make it even easier to drain.
I have scavenged some evaporators from top-freezer fridges I was thinking of doing this with. Just have to make sure it will withstand 150psi. Solder some fittings to inlet/outlet.
How many hours are you supposed to change the oil, ive never changed mine
joe estes I think like 50 but the manual does say it. Not home to check
When you can't see thru the oil my more. Change it
My compressor is about 40 years old and I just changed it a few months ago. It was still see through, just barely.
Yours its pretty quiet, i have the same one and i sold it because for painting cars its not that great but on toher side its a good compressor for power tools.
What compressor do you need for painting?
@@WordupG 60 galon compressor with a 5 hp motor with good scfm capacity but you still can do it with a 30 gallon one .