AutoChoice was one of the spots I was going to get my build done. They do some good work - you made a great choice getting your new joints mounted with them. Looking damn good!
Looks great! Did you cut have to cut the front bumper or add bumper spacers to not have the 12" wides not rub? I have the same offset and am rubbing at full lock with my newly installed 33" X 12'5" R22s.
Ok thanks man that really helped me out on my decision and seeing your videos motivated me to get a truck I’m a city guy with a super low bimmer I’m from Cincinnati but that truck looks nice🔥🔥 especially the way you made yours look I have to get 1 💯💯
I have my 2015 Tahoe on 26x14 with 35x13.50 on a 3” level, I drive it daily and it’s been from Seattle to San Diego twice and Houston twice. You will be fine driving daily with that setup.
Honestly nothing bro I think the previous owner had some work done to it. Everyone always tells me it’s shiny. I mainly use soap and water and waterless car wash spray
I love the wider stands. Amazing how going with a wider setup can change the look of the truck. How is the road noise? You boy was using some street stuff with the starter fluid to mount the tires.
The Nitto Ridgegrapplers are louder then the recons so with that alone I can tell you it’s louder now far as road noise. lol the old tried and true way
Tough choice. Both shine in different areas. The recon is perfect for a street day today driving. They’re very quiet and smooth but they aren’t the best in wet weather. The ridge grappler is great in wet weather, but they are a little louder and not as smooth as the recons.
i feel you, everyone has their preference, you know no right or wrong. I have to say I like the 14s better. However, I think if I had 22s I think the 12 wise would be 👌🏾👌🏾
I’m about to put the vertex clovers on my truck. I have the 7 inch lift Ready lift. The coil over say up to a 6.5 lift. Did you have to put a 1/2 space to get to the 7”. I see that you went back to the 24x12 -76? With a 13.5 tire?
Mr. Q. What'd you do to your rear end? *once you go 37s. Its a must to regear. Just curious what rear end you have and how you went about upgrading. Thanks
Brother! That thing gotta be sluggish!?!?!? I know you gotta feel a difference? It aint rocket science. Remember theres an expensive ass part under your ass!!! Lol Yo! My Best Friends A Master Mechanic. He just rebuilt the motor on his Denali. He otta get loke 700hp now. We gotta piut miles on it before we dyno. No matter what. Anything ever happens to my shit. Im buying a trans from his buddy in Atlanta. The dude started Redline transmissions...I think. That business got acquired. Now the dude just builds dope shit for gearheads. I'll let you know soon. Brother! If you dont regear. For like 1600. You'll be buying a trans. Cause I damn well know you out there shining and dogging the hell outta that b****. And whats up with that AnyLift plug? Yous supposed to make that happen Jack! -its prolly a chassis issue. My punkass aint ever buying no 250. I saw a Sexy ass dually the other day at the gas station. I was like...that shit fresh. Stock. I said ...it gotta be a 450...amd when I pulled off...IT DAMN SURE WAS. I could tell by the appearance package. It was a nice ass truck. I KNEW IT WAS A 450. LOL✌🏾❤
Man freaking sick! I have a black f150 coyote on a 6” rough country only running 33 12.50 r 20. Lol got me wanting 24x14s on 37s now haha. Very nice man. Garland tx! Nice I’m from canton man! Lol.
The new wheels are looking super clean bro really makes the truck pop, I just got me a set of 24x14s on 33 13.50 over the weekend and I love them,I rub a bit too on the back side but nothing crazy, congrats again on the 14 wides I know you had been talking about getting set for red for a hot minute too I’m super excited for you
Thanks bro I appreciate the support and for watching the video. Congrats on your set up as well man. Like you said 14s definitely change the stance and look of the truck.
Looks so good. I'm currently on 22x12 and been wanting to to up the size but also don't feel like trimming anything since I'm not rubbing at the moment lol
Your truck is raw man congrats🔥 I have a 2019 King Ranch F-150 leveled on 34” Ridge Grapplers with the stock KR 20’s. I been watching your vids all morning plotting my next move. My biggest hangup right now is deciding whether I wanna wait until I need new tires to go for the whole 6” lift/wheels/tires or just do it. Idk if anyone will buy the KR wheels and the tires only have about 10k miles on them 🤔
I had a 2017 with 6in lift, started with 20x10 on 35's, then 22x12, again 35 but 13.5" wide.. I wouldn't want 24's by any means what so ever.. I miss the ride the 20's gave.. And when this set of tires is gone, I'm gonna sell the whole set and buy a set of 17's and get me a real comfortable ride with some nice fat sidewalls of rubber.. Kinda over the big wheel look and wanting to go back old school or pre runner style..
Ur truck is so clean bro! How big of a lift you have? I wanna go bigger setup on my lifted 24 ram 1500. I have a 6 inch. Still debating on whether I should go 24 by 12’s or 24 by 14’s and whether I need to go 35’s or 37’s. I’m on 20x12’s and 35’s right now but I know I can go bigger
I prefer the 14 wides look but for my Leveled 19, Im gonna run 12 wides. Great job Q that setup is dope man! Side note, are you going to match the Front grille Ford emblem with the red/black emblem on the Tail gate?
@@KickinItWithQ awesome.. Love your videos. They have been making me fall in love with my truck again. Upgrading my lift with the RC lift and Vert shocks. I have 22x12 now on Ridge Graps but looking at 24x12. Also may do a Diablo tune
@nicolesalinas382 I do super quiet and comfortable. My only complaint about them are they aren’t the best in wet weather. Especially light rain, they get a little slick. Here’s a comparison video ua-cam.com/video/zfotoZy_pKw/v-deo.htmlsi=FXvFZWEnUiKauMM9
Looking good homie! Great choice of tires ... love my Ridge Grapplers ... A couple things though, the way he seated the tires using the liquid pop is not good for your tires, that "will" damage the seal I worked for Big 0 Tires for 5 years, we don't seat tires like that, keep an eye on them! Anything over 4oz of weight on tires this size requires the tire to be spun 180° on the wheel, that will lower the amount of weights needed to properly balance the wheels Check all 4 wheels, make sure that the ones with the least amount of weight are in the front ... Other than that homie the truck looks B@D@$$!
and just so you know. i see you have no chrome at all. if you want to you can take your center caps off and the chrome logo on them unscrews from the back side. you can paint match them red to your truck. so the TIS logo would be red and not chrome. or you could do black
@@KickinItWithQ that thang is straight pressure. That rub could be annoying. People be turning around like “what the hell” but on my truck it’s worth the looks. I’m only on 12 wides. I gotta send you a pic of my build.
Bruh got down off that truck like Craig did on Day Days roof on next Friday.
🤣🤣💀 bro I’m dying laughing. “Look at my roof”
@@KickinItWithQ 😂😂😂 yes!!!
@@paidhowboutu1 😂
😂😂😂😂😂
Looks good Q!! It must be hot there cause u sweating!!😂 I’m in Florida and it’s humid!!🥵
AutoChoice was one of the spots I was going to get my build done. They do some good work - you made a great choice getting your new joints mounted with them. Looking damn good!
Definitely hope they stay around. I will be going back
Man i love it. You really notice the difference standing at an angle, atleast in the video. Truck looks dope dude. Love the build Q
Yeah, now that I have had them on for you. Well, you definitely notice a difference it looks way more wide lol and full.. just beefy lol
That’s a good looking truck color is killer I have a Silverado that’s Cajun red color is wicked
Looks great! Did you cut have to cut the front bumper or add bumper spacers to not have the 12" wides not rub? I have the same offset and am rubbing at full lock with my newly installed 33" X 12'5" R22s.
A lot ofof trimming and cut bro
Sick bro very nice. Where did you pick up the wheels?
Custom offsets
Ok thanks
I’m trying to buy a truck when you bought yours how many miles was on it I know it’s a 2015
It had 43k miles when I bought it
Ok thanks man that really helped me out on my decision and seeing your videos motivated me to get a truck I’m a city guy with a super low bimmer I’m from Cincinnati but that truck looks nice🔥🔥 especially the way you made yours look I have to get 1 💯💯
@ajhenny5400 I appreciate that bro 🤝🏾. Okay I see you with the low life 🫡. Goodluck on your build bro
I have my 2015 Tahoe on 26x14 with 35x13.50 on a 3” level, I drive it daily and it’s been from Seattle to San Diego twice and Houston twice. You will be fine driving daily with that setup.
Nice! I appreciate you sharing your experience, bro! You definitely taking that thing all over 🫡
What products do use to wax and polish your truck? Looks sick
Honestly nothing bro I think the previous owner had some work done to it. Everyone always tells me it’s shiny. I mainly use soap and water and waterless car wash spray
Looks so good!!!! Ive been watching a bunch of your videos and im glad i found your channel. Keep up the great work 🤘🤘🔥🔥🔥🔥🔥
Do you get a lot of rock chips from the 12 wides
Umm not really but anytime a tire is sitting outside the wheel. Well there’s that chance.
What did you do with the old set up?
I’m keeping them for a back up set for the time being
Looks amazing bro….what go pro are you using Q? Video quality is on point 👌🏼
Hero 11 black! Thanks bro!
Thank you 🙏🏽
Where your head lights from? Also it looks so clean
They are Morimoto headlights
I love the wider stands. Amazing how going with a wider setup can change the look of the truck. How is the road noise? You boy was using some street stuff with the starter fluid to mount the tires.
The Nitto Ridgegrapplers are louder then the recons so with that alone I can tell you it’s louder now far as road noise. lol the old tried and true way
Where did you get the rims at ? I’m trying to get the same ones
Custom offsets
It was cool to see how the balance process works..never knew thats what they did to balance tires
I know right I was happy he allowed me to film and share that
@@KickinItWithQ Yes and ironically I just bought new tires Saturday lol
What is the backspacing on the 12 wides
I’m not sure to be honest
What was better, Recon or Ridge Graps?
Tough choice. Both shine in different areas. The recon is perfect for a street day today driving. They’re very quiet and smooth but they aren’t the best in wet weather.
The ridge grappler is great in wet weather, but they are a little louder and not as smooth as the recons.
What you doing with the old ones? Are you going to sell them?
Keeping for a spare set for the moment
Personally i like the 12 wides way better, but they both look good bro
i feel you, everyone has their preference, you know no right or wrong. I have to say I like the 14s better. However, I think if I had 22s I think the 12 wise would be 👌🏾👌🏾
The bigger the better 👍
What is your offset on the 24x14’s?
-76
I’m about to put the vertex clovers on my truck. I have the 7 inch lift Ready lift. The coil over say up to a 6.5 lift. Did you have to put a 1/2 space to get to the 7”.
I see that you went back to the 24x12 -76? With a 13.5 tire?
Mr. Q.
What'd you do to your rear end?
*once you go 37s. Its a must to regear. Just curious what rear end you have and how you went about upgrading. Thanks
Stock3.55 gears. Haven’t regeared yet
Brother! That thing gotta be sluggish!?!?!?
I know you gotta feel a difference? It aint rocket science.
Remember theres an expensive ass part under your ass!!! Lol
Yo! My Best Friends A Master Mechanic. He just rebuilt the motor on his Denali. He otta get loke 700hp now. We gotta piut miles on it before we dyno. No matter what. Anything ever happens to my shit. Im buying a trans from his buddy in Atlanta.
The dude started Redline transmissions...I think. That business got acquired. Now the dude just builds dope shit for gearheads.
I'll let you know soon.
Brother! If you dont regear. For like 1600. You'll be buying a trans. Cause I damn well know you out there shining and dogging the hell outta that b****.
And whats up with that AnyLift plug? Yous supposed to make that happen Jack! -its prolly a chassis issue.
My punkass aint ever buying no 250. I saw a Sexy ass dually the other day at the gas station. I was like...that shit fresh. Stock. I said ...it gotta be a 450...amd when I pulled off...IT DAMN SURE WAS. I could tell by the appearance package. It was a nice ass truck. I KNEW IT WAS A 450. LOL✌🏾❤
do you rub with 24/12 at all? i’ve been looking to run KG1s but i don’t know what tires to run
A little bit, but not really they have to do a lot of trimming and cutting
I wonder how can I get a similar negative offset without deleting my air suspension on my 2016 Ram Rebel
Why did you switch back to the Recons?
These are the ridge grapplers but I’m just gonna rotate and swap between tires honestly use them both
@@KickinItWithQ Sounds like something I would do. I’m looking at the Recons. Like the look and dislike road noise. Thanks for the reply.
Heck ya that looks awesome! Would love to have a set up like that! Nice video!
Thanks bro! I’m definitely gonna do another video about. How is it with 14 wise verse 12
Man am in The Bahamas and watching your videos are inspiring me so much. Am doing my truck for Christmas coming
I appreciate you watch in front of Bahamas man! Good luck on your build come Christmas time
@@KickinItWithQ seriously am a Bahamian, you have a small group following you and your truck upgrades in The Bahamas
@joelseymour463 tell everyone thanks for that support 🙏🏽🙏🏽
How much for the old rims and tires bro?
Keep as a backup set right now
Man freaking sick! I have a black f150 coyote on a 6” rough country only running 33 12.50 r 20. Lol got me wanting 24x14s on 37s now haha. Very nice man. Garland tx! Nice I’m from canton man! Lol.
It’s going to look dope bro just be ready to deal with rubbing and a rougher ride
@@KickinItWithQ yea for sure man lol!
does your 3.5 run warm? I've tried everything and my coolant temps are consistently between 208-225
Mines run about 205 ish too
What are your thoughts on traction bars? I have been thinking about getting BDS traction bars.
They are beneficial helps keeps rear and planted abs axle wrap. I personally just like clean under carriage look on half tons.
Did your mpg drop more with the 14 wides on?
Yep lost about .5-1mpg
The new wheels are looking super clean bro really makes the truck pop, I just got me a set of 24x14s on 33 13.50 over the weekend and I love them,I rub a bit too on the back side but nothing crazy, congrats again on the 14 wides I know you had been talking about getting set for red for a hot minute too I’m super excited for you
Thanks bro I appreciate the support and for watching the video. Congrats on your set up as well man. Like you said 14s definitely change the stance and look of the truck.
Q,your truck don't have a tailgate step & handle?
Nope she a 2015…old school
Mine is a 2014f150 3.5 limited supercrew & I've got it
@edwinguinyard219 hmm maybe it’s the trim level. I have xlt
Oh, by the way, getting ready to put 325-55-22 pirelli on stock wheels too this week
@edwinguinyard219 nice 👌🏾
What size and brand lift u have?????
6in rough country lift. Added the vertex Coilovers I’m at about 6.5 to 7 inches of lift.
Looks so good. I'm currently on 22x12 and been wanting to to up the size but also don't feel like trimming anything since I'm not rubbing at the moment lol
Yea going up you definitely will have to trim
Boys out here setting thangs on fire 🔥 😮😮😮
Aye man trying to be like you when I grow up
@@KickinItWithQ I’m tryna get like you… my truck regular
@heydario say less. Let’s get you right. Just gotta drive slow homie
Your truck is raw man congrats🔥
I have a 2019 King Ranch F-150 leveled on 34” Ridge Grapplers with the stock KR 20’s. I been watching your vids all morning plotting my next move. My biggest hangup right now is deciding whether I wanna wait until I need new tires to go for the whole 6” lift/wheels/tires or just do it. Idk if anyone will buy the KR wheels and the tires only have about 10k miles on them 🤔
Thanks bro I appreciate that! You can definitely wait and while you’re waiting just get everything in order
Yessssssiirrrskiii!! Red looking good on them 14 wides !
Trying to catch up with y’all! I appreciate you bro! 💯🤝🏾
what did you do to the 6 inch lift to run 37"s
A lot of trimming and cutting and got coilovers and raised them up
That shot of backing out was sick!!!!😎💪🙏🇺🇸
Thanks bro I appreciate that! Thanks for watching
That deeper dish do be setting it off I'm thinking of upgrading my 12.5 to a 13.5 but the 14 you put on do set it off
Thanks bro
Back Back Back Back!!!
Truck looks awesome!!!
I appreciate you bro. Thanks for supporting.
Say Q you got her looking good. Man i can not wait to start fixing up my ride
I appreciate that bro! Do you thing bro 💪🏾💪🏾
@@KickinItWithQ appreciate you for motivating me im trying to be like you when i grow up. Does red ride different since you put bigger tire's on her?
@mikeanderson9613 oh yeah, a lot different. I’m going to do a video on it.
I had a 2017 with 6in lift, started with 20x10 on 35's, then 22x12, again 35 but 13.5" wide.. I wouldn't want 24's by any means what so ever.. I miss the ride the 20's gave.. And when this set of tires is gone, I'm gonna sell the whole set and buy a set of 17's and get me a real comfortable ride with some nice fat sidewalls of rubber.. Kinda over the big wheel look and wanting to go back old school or pre runner style..
Those ridge grapplers are a great choice of inbetween. They look great and ride awesome. Had a set
Agreed bro! The recons are quieter however
Hell yea my boy finally got his 24x14 install ❤❤❤❤
Yes sirrr! 💪🏾💪🏾
One of the sharpest trucks on the 'net! Love those new shoes!
I appreciate the words man 🙏🏽
Red looking good!!!! 👊🏿🙌🏿
Appreciate it bro
Love the headlights. 😎
Thanks 🤝🏾
I like 10 or 12 wide not a fan of 14 it really not good on front in parts and always rub
You absolutely right! It’s totally for looks lol
Maaaaan, you got me lookin' at my 22 x 12s like....I on wont chu no mo! 🤣
😂🤣 that’s how I was every time o saw someone on 24x14 when I had my 12
The wheels look amazing!
Thanks bro! I appreciate you watching
Yo man I went with 14 wides and regretted it for a year and a half but that was with a jeep, to look that good comes with a bit of a price
Exactly! Beauty is pain lol
@@KickinItWithQ looks 🔥🔥
@magicmarlln thanks 🙏🏽
Needa get our trucks linked up for a vid👀
The truck looks sick bro👍🏾👍🏾
Thanks bro I appreciate that
Bro thats sick! Good job mayne..
Thanks boss 💪🏾
She got a bbl!!! Looks so good Q👏👏👏👏
Haha 😂 thanks bro!
Are u saleing the rims.
Keeping as a backup set for time being
Bro, that looks sick! It really changes the stance. Looking sharp.
Same bro at first I didn’t see a difference but then later on, I could tell it looks much better
@@KickinItWithQ Very aggressive. But it looks nice!
@cowboy-wr5jt 🤝🏾💯
Ur truck is so clean bro! How big of a lift you have? I wanna go bigger setup on my lifted 24 ram 1500. I have a 6 inch. Still debating on whether I should go 24 by 12’s or 24 by 14’s and whether I need to go 35’s or 37’s. I’m on 20x12’s and 35’s right now but I know I can go bigger
It’s a 6 inch lift, bro. I didn’t get the Coilovers and raise them up a little bit. Yes I do still rub I get about a turn 1/2 before I rub.
@@KickinItWithQok so u didn’t get the coil overs? I appreciate the info and how did u like the recon grapplers if u don’t mind me asking
@@nicolesalinas382 I did get coilovers
@@KickinItWithQ oh ok so u think I can run that setup without the coil overs?
@@KickinItWithQjust curious bc it’s a big purchase.
I prefer the 14 wides look but for my Leveled 19, Im gonna run 12 wides. Great job Q that setup is dope man! Side note, are you going to match the Front grille Ford emblem with the red/black emblem on the Tail gate?
Thanks bro! Nah I’m going to leave it all black
Ayyyeeeee!!!!! Cause for celebration 🎉
Yes sirrr i appreciate you bro!
Was going to say bro that loading process is going to be a work out LOL
Man big time lol! About to get some ramps!
They look awesome! How much for the old ones? Lol
For the moment, I’m going to hold onto them for a back up set
dope man! Congrats
I appreciate that bro!
Yo Q, I learned my turn radius by changing my dash setting to off-road mode
When does that come in handy?
Big Red sittin rite! 🔥
I appreciate that bro. Thanks for watching and supporting.
We need some reels 🤙🏽
I know! I working on that. Waiting on another guy to finish his truck
Do you think 24x12 would be better??
I just came from 24x12s and as a daily yes the 12 wides are better for daily driving
@@KickinItWithQ awesome.. Love your videos. They have been making me fall in love with my truck again. Upgrading my lift with the RC lift and Vert shocks. I have 22x12 now on Ridge Graps but looking at 24x12. Also may do a Diablo tune
Nice! Good luck with the view bro. Glad you enjoyed the channel.
Looks good!
Preciate it bro!
Well atleast you can go to lifted trucks and have them trim some of the plastic off so it doesn’t rub
Yep that’s the plan
Bro you sweatin bullets lmao😂
Man whadddd hot af out here 😂
It looks really nice man but ngl I prefer the Bubba style on my truck.
Thanks man! And to each it’s own. #respect
Bro you going to give yourself CTE with your intro lol love the content
Haha not CTE 😂. Glad you enjoy the content bro
old set for sale? 👀
Going to hold onto them for a Mac upset for right now
Looks 🔥🔥 bro!! ✋🏾⭐️
I appreciate you bro. Thanks for supporting.
Looking good 💯
Thanks bro
If you ain’t scrubbin you ain’t thuggin!
Haha that’s how the saying goes
I really would like to run 24x12’s on 37 13.50 Nitto’s if I can.
That’s the perfect day driver set up in my opinion
@@KickinItWithQyeah I agree. U think I can run that setup without the coil overs like u have? The 24x12’s on 37’s
@nicolesalinas382 nooo it’ll definitely rub bad unless you go a taller lift kit
@@KickinItWithQ yeah ur right. Did u like the Nitto recon grappler tires?
@nicolesalinas382 I do super quiet and comfortable. My only complaint about them are they aren’t the best in wet weather. Especially light rain, they get a little slick. Here’s a comparison video ua-cam.com/video/zfotoZy_pKw/v-deo.htmlsi=FXvFZWEnUiKauMM9
Looks good... like the wider lip
Same bro! Thanks for watching!
Let’s Go!!! 🔥🔥🔥🔥
Aye i appreciate the support bro 🤝🏾
@@KickinItWithQ np! Mf look good!
@@BigHeadPatReviews 🤝🏾
Looks excellent 👌
Preciate that bro!
Maybe 22x14 would make it a little better? But those wheels are 🔥🔥🔥🔥
Thanks bro! 22s def would give a Beefer look
looks good brother !!!!!
Thanks bro I appreciate it 🤝🏾💯. Thanks for watching and supporting.
I prefer the 12 wide look , but that’s me
And that’s cool bro everyone has a preference you know I don’t think there’s a wrong or right way to do it
Truck looks good! But like you said it’s not that big of a difference.
Oh, I spoke too soon. Lol. Now having them on there for a bit is a noticeable difference.
@@KickinItWithQthrow some spacers on!
@drerocs 😂 I prefer to be able to turn instead lol
Looking good homie! Great choice of tires ... love my Ridge Grapplers ...
A couple things though, the way he seated the tires using the liquid pop is not good for your tires, that "will" damage the seal
I worked for Big 0 Tires for 5 years, we don't seat tires like that, keep an eye on them!
Anything over 4oz of weight on tires this size requires the tire to be spun 180° on the wheel, that will lower the amount of weights needed to properly balance the wheels
Check all 4 wheels, make sure that the ones with the least amount of weight are in the front ...
Other than that homie the truck looks B@D@$$!
Thanks bro! He did make sure one with least amount where up front. I appreciate the info man!
@@KickinItWithQ nice! ... that way you have less chances of any vibrations
and just so you know. i see you have no chrome at all. if you want to you can take your center caps off and the chrome logo on them unscrews from the back side. you can paint match them red to your truck. so the TIS logo would be red and not chrome. or you could do black
Yeah bro, I think rid of black would be to move. I might have to look into someone to do that for me. I appreciate the idea.
man u should get raptor n that's it.
They are dope looking!
I hate how good Q's truck looks shit make me so jealous 😭
You go get there bro
@@KickinItWithQ i got a 2016 f150 lariat on a 3.5sst lift on 17 raptor gen 2 wheels on 35x12.50s... i like this look but yours is killer bro!
@@KickinItWithQ actually Raptor Gen 3 OEM 17” wheels not the bead locks.
@hudsonburton7941 Nice Build and thanks bro
Thosec24 x14,looks nice
Definitely change the look of the truck
Lookin good man.
Thanks my guy! hope all is well!
Looking Good My Brother
Thanks bro 💯
@@KickinItWithQ I’ve Built a Few of my F150 But You Went Next level with your wheels
@@KickinItWithQ do you have a social media page where I can send you a few pictures of my vehicles
@miguelalind3768 🤝🏾
Prepare for the rock chips in the door 😭 no body warned me 😂
😂😂 thanks for heads up!
Nice!!!!!
Thanks bro!
BiG Red Lookim Good!
Preciate that man!
Nice bro.
I appreciate it bro! Thank you for watching bro
That bih hard
Thanks bro! Now seeing them on, it’s a huge difference. Trucks look a lot better
@@KickinItWithQ watching the build from the beginning to now, those 14 wides set it off. I’m motivated. I’m go to 14s now
@paidhowboutu1 man the truck got looks before but now…I get looks EVERYWHERE I go. But it rubs like a mf. Especially in parking lots
@@KickinItWithQ that thang is straight pressure. That rub could be annoying. People be turning around like “what the hell” but on my truck it’s worth the looks. I’m only on 12 wides. I gotta send you a pic of my build.
@@paidhowboutu1 yea I’m definitely backing up like 2-3x to make a turn 😂. My IG says as my UA-cam
Looking sweet
I appreciate that my guy!