How is the cartridge port, for cleaning? I bought a mast flip 2 and there were pits that went into the stroke slide and gear wheel, which were covered with grease. Meaning it's a trap for germs and blood. They never show the inside of the ports on pictures or videos.
I've been using for about a year now and I love it. Wrapping it is a pain in the ass and I just gave up on the pre cut bags and went back to plastic wrapping.
I am using it now for over a week, the machine is great wrapping is a problem and from one of my battery the + button came out of the housing. I put i gently back but sometimes with adjusting the voltage it goes automatically to max Voltage. So be carefull with the battery buttons.
Speaking of Dragonhawk tattoo machines: Would you rather recommend the mast fold pro or the new mast fold 2 pro? Considering the price/performance ratio, how suitable is it for fineline, lettering tattoos and line work in general. I would also be interested to know how comfortable the machines are to hold, as the new mast fold 2 pro is slightly heavier and longer. I know that the mast fold 2 pro machine has a longer battery life, but can it keep up with all the other features of the mast fold pro? I am not a professional tattoo artist and only tattoo occasionally and have made it my hobby. However, I still want to be able to do a good job with my machine.
The Batman line though haha 😂 😂 heap of people rating this machine pretty solid, might take the plunge and get just get one of these instead of an $1800 machine 🤔 🇦🇺
@@mullet-man6956 hey mate, yeah I got it and still use it every day. I haven’t used any “higher end” machines so can’t compare, but i have had zero issues with mine, I’ve had it push 18rs without issue and only gone to 23mag so far without issue, I’m sure it’d push more too. Batteries last 4-5hrs’ish I think, I haven’t really taken much notice with that tbh.. with the two batteries I just swap out when one gets low etc makes it a breeze. I’m no pro but it works really well for me 👌🏼
Greetings chris I've watched your review i've also seen a number of other people reviewing this machine. I finally purchased one last week. I've been tattooing for about 13 years. All coil machines. I've used this machine for about 25 hours And it is a fantastic machine. I am extremely happy with it. And for the price you cannot go wrong even picked up 2 extra batteries. Awesome. Thank you for your honest review.
I would say it gives a better one, from E.Z P3 Pro with the same stromke adjust and with a Colour Amoled Display and you see the Herz and Volts and has Bluetooth.the Acku has 1600 mAmp !the direct drive Motor is a Swissmade one with enough Power!All for 350 Euro
How for you like it compared to the ep7 that’s a machine I’ve been looking at I currently been using the mast archers 3.5 and 4.2 I’ve just ordered the fold so I haven’t gotten a chance to use it but how do you like that one as well?
can you quickly tell me what strokes you use? and for what field? except shading at 2.7 and bold lines at 4.2, but what else? question is, do you really need all the strokes?
That’s one thing about the racer. It’s much lighter but the battery is a lot smaller. Maybe they could make a smaller pack for this one. How much does it weigh on the rca?
Heeey Chtis, because of your video I bought this machine. Having this machine for a week now my expensive brand machines are on Holliday. The only con for me is wrapping it properly, but After 10 times I have it tackled. The weight is helping with the balans. A brushed motor is less expensive that a coreless, and the coreless have lot of advantages ober a brushed motor. But indeed brushless would have been better. Great video again and thanks for helping me buy this monster machine 🤙🏻💪🏻🙏🏻😎
Hey Chris I have this machine and recently it got so much louder so I have been searching for information on how to realign the cam and do you know if the motor is supposed to be flush inside the housing. I accidentally unscrewed the locking screw and the motor slid out . Fml , anyway if you know anything at all about setting this machine up from the asssmebly and alignment of motor and cam, that would be god sent right now !
Hi bro. This is out of context. I want to buy a machine at dragonhawk official site and use your code. I am from UAE and I dont know how is the process for delivering the items. Because in there site. There is no options for customer to add the phone number and share location. Like, how they will deliver it if they have no info about the details of the customers, specially mobile number or shared location.
@@chachenaki_kichenancha you can damage the skin with any machine, soft or hard hitting.. with any machine you adjust accordingly, but the machine is absolutely fine
Hi Chris, im just wondering if you carried on using the fold pro and if you still like it, i currently use the bishop wand packer but fancied trying an adjustable stroke machine, im just wondering if you still rate it?? Cheers in advance.
Hello Chris, can you please tell me if the fold is compatible with Kwadron cartridges. Thanks a lot for your reviews and all your work. You are a great artist
Doesn’t that only have 5 stroke lengths? This has 7 which makes it the more versatile imo in comparison to that particular machine. Just remember this is a Dragonhawk review not a Axis review so I’m only taking this machine into account when I do them 😬
@@musoehcr so far no complaints to be honest. Usually manage a full day sitting on a fully charged battery (depending on the type of work) Does lose its punch when the battery's getting low, but I think that happens with most wireless machines. Line work, spot on. Colour packing spot on. Its a good all rounder. Bare in mind I'm only a year back into tattooing after a good 5 year break. I'm new to rotary.
@@ChrisRavage dont get me wrong..ofcourse why not 😅..but i was just surprised,that you of all people,seems to be in aw of the stroke system..while there are loads of better machines have that already.. And for that price i would go for Stigma with the 8Watt dubble bearing motor
@@roytumbelaka essentially it’s a review and although my thoughts are 100% true and honest it is still a review and a selling point of this particular machine. I have to do the review with just this machine in mind, nothing else and with it been a feature on this particular machine, I’m going to get excited about like it’s the only machine that does it..I hope that make sense.
I got this one. This one really good machine. All around machine and nice but i think not strong enough if you used thick needle. Best machine i ever used and most affordable 🔥
Nope, but even if it was, I have more integrity than that, to myself, subscribers and people who watch this to do a fake or bias review for money 😬😉. It’s just a genuine review
Looks like a great bit of kit forom the review.. my only concern with these machines are the longevity of tge motors.. ie burning out etc.. But bar that the functionslity is fantastic.. goes to show how simple this stroke adaption technology could and should be for the high remanufacturers.. if these Mast guys can include it and charge this price. I'm guessing it's one a those things they could do.. but then we'd all come to expect it... meaning they could no longer sell us multiple machines.. there's a word beginning with C that ends with an abbreviation of the word NUTS.. that springs to mind🙄😂
Put at 1.25 playback speed thank me later
I didn’t even hesitate lol thank u
Why does it seem like normal speed lol
I'm more of a 1.5 man myself 😂
1.75
Thank you
Time feature use can be very useful to fine-tune the estimate of price / time spent tattooing, to me is not really a con. Great review btw.
How is the cartridge port, for cleaning? I bought a mast flip 2 and there were pits that went into the stroke slide and gear wheel, which were covered with grease. Meaning it's a trap for germs and blood. They never show the inside of the ports on pictures or videos.
Buy 2 for that price get 2 batteries and a standby machine ❤
The BATMAN line sold me, thank you! Great review
I've been using for about a year now and I love it. Wrapping it is a pain in the ass and I just gave up on the pre cut bags and went back to plastic wrapping.
What stroke do you use for lining?
@@AndrueSOCALfor lining usually the 4.0 stroke is good
@@RenanzinhoSopadeAbobora thank you
I am using it now for over a week, the machine is great wrapping is a problem and from one of my battery the + button came out of the housing. I put i gently back but sometimes with adjusting the voltage it goes automatically to max Voltage. So be carefull with the battery buttons.
What stroke do you use for lining?
Speaking of Dragonhawk tattoo machines: Would you rather recommend the mast fold pro or the new mast fold 2 pro? Considering the price/performance ratio, how suitable is it for fineline, lettering tattoos and line work in general. I would also be interested to know how comfortable the machines are to hold, as the new mast fold 2 pro is slightly heavier and longer.
I know that the mast fold 2 pro machine has a longer battery life, but can it keep up with all the other features of the mast fold pro? I am not a professional tattoo artist and only tattoo occasionally and have made it my hobby. However, I still want to be able to do a good job with my machine.
The Batman line though haha 😂 😂 heap of people rating this machine pretty solid, might take the plunge and get just get one of these instead of an $1800 machine 🤔 🇦🇺
What’s ur opinion on it? (If you bought it)
@@mullet-man6956 hey mate, yeah I got it and still use it every day. I haven’t used any “higher end” machines so can’t compare, but i have had zero issues with mine, I’ve had it push 18rs without issue and only gone to 23mag so far without issue, I’m sure it’d push more too. Batteries last 4-5hrs’ish I think, I haven’t really taken much notice with that tbh.. with the two batteries I just swap out when one gets low etc makes it a breeze. I’m no pro but it works really well for me 👌🏼
Greetings chris I've watched your review i've also seen a number of other people reviewing this machine. I finally purchased one last week. I've been tattooing for about 13 years. All coil machines. I've used this machine for about 25 hours And it is a fantastic machine. I am extremely happy with it. And for the price you cannot go wrong even picked up 2 extra batteries. Awesome. Thank you for your honest review.
I would say it gives a better one, from E.Z P3 Pro with the same stromke adjust and with a Colour Amoled Display and you see the Herz and Volts and has Bluetooth.the Acku has 1600 mAmp !the direct drive Motor is a Swissmade one with enough Power!All for 350 Euro
I've watched plenty of videos on the fold pro. After this one I'm convinced it's my next machine.
Think you might have sold me. Currently rocking the ep 7 by ava. Thanks for the review 🙌👊
How for you like it compared to the ep7 that’s a machine I’ve been looking at I currently been using the mast archers 3.5 and 4.2 I’ve just ordered the fold so I haven’t gotten a chance to use it but how do you like that one as well?
You should review the Ava Ep10! It has 20 strokes from 2.5 to 4.5 and everywhere in between only cost about $400 I think
Nah it’s pretty bad. It’s starting to do funky stuff
I don’t know EVA EP10 and fold pro which one better
@@tranthihoaithuong7934 Ava EP 10 is better in my opinion
3:25 bro you make a line invisible? 😮 what t hll ??? What happend?????
Do someone know which one is better between this dragonhawk and the acus m1 plus ?
can you quickly tell me what strokes you use? and for what field? except shading at 2.7 and bold lines at 4.2, but what else? question is, do you really need all the strokes?
A real artist needs only one stroke 🫡
@@Misteralb326 sure I mostly use the same stroke too, but if you are very careful you can make use of the strokes right?
If the this machine had a brushless motor it would have been a banger for me to be honest
Its too thick and bulky for a pen machine. Needs a gorilla grip for weight distribution for balance.
I’ve got this and it’s awesome, got to get a spare battery however
I love mine it’s the shit
That’s one thing about the racer. It’s much lighter but the battery is a lot smaller. Maybe they could make a smaller pack for this one. How much does it weigh on the rca?
Myself personally, I can't complain about the weight compared to coil machines. I actually prefer the heavier machines.
i had mine 2 batteries.. yes this machine is awesome👏
Lol i have it at 1.5 or maby 2 hajaja in this situaciones
Just ordered mine!! It's getting here on Saturday! Hope to one day be an awesome artist/ content creator like you bro 🦾😎
What stroke do you use for lining?
Can you take it apart to clean the push bar? That would be the ultimate selling point for me
The fold pro is the exact same machine as the peak solice pro but the fold pro has better batteries
Gettin this next week
Heeey Chtis, because of your video I bought this machine. Having this machine for a week now my expensive brand machines are on Holliday. The only con for me is wrapping it properly, but After 10 times I have it tackled. The weight is helping with the balans. A brushed motor is less expensive that a coreless, and the coreless have lot of advantages ober a brushed motor. But indeed brushless would have been better. Great video again and thanks for helping me buy this monster machine 🤙🏻💪🏻🙏🏻😎
Hey Chris I have this machine and recently it got so much louder so I have been searching for information on how to realign the cam and do you know if the motor is supposed to be flush inside the housing. I accidentally unscrewed the locking screw and the motor slid out . Fml , anyway if you know anything at all about setting this machine up from the asssmebly and alignment of motor and cam, that would be god sent right now !
Спасибо за обзор мужик, Успехов
Hi bro. This is out of context. I want to buy a machine at dragonhawk official site and use your code. I am from UAE and I dont know how is the process for delivering the items. Because in there site. There is no options for customer to add the phone number and share location. Like, how they will deliver it if they have no info about the details of the customers, specially mobile number or shared location.
Hey man, if you checkout using Paypal, your address is used through your PayPal details.
I am waiting on the fold pro 3 😎
I watched you review Fold pro while I was using Fold 2.😂😂
Damn it Chris...stop making me buy new machines!!! Awesome video brother. Are the magnetic batteries going to be available for backups?
Haha my bad Corey. Yes I believe they all ready are ☺️.
Do you find the motor to be too strong ?
To damage the skin too fast ?
No not at all 😬
@@ChrisRavage glad to hear ,I ordered one today. I saw a review from a German tattoo artist, and he was complaining that the motor is too strong.
@@chachenaki_kichenancha you can damage the skin with any machine, soft or hard hitting.. with any machine you adjust accordingly, but the machine is absolutely fine
Saw that too, but the german guy is an idiot. U can damage the skin with every Maschine.
thank you so much for the review,i bought this machine now in my hand.
Can you do a wos e60 tattoo machine review
Question 🙋 did you charged the battery before use it for certain time or you just used it as it came?
Used from box, then fully charged and used again till zero charge 😬
Just bought it
Dark knight or fold pro please?
Hi Chris, im just wondering if you carried on using the fold pro and if you still like it, i currently use the bishop wand packer but fancied trying an adjustable stroke machine, im just wondering if you still rate it??
Cheers in advance.
Yes bud, I still use it and still rate it.
@@ChrisRavage thanks for the swift reply 👊
Hello Chris, can you please tell me if the fold is compatible with Kwadron cartridges. Thanks a lot for your reviews and all your work. You are a great artist
Kwadrons fit absolutely fine in mine 😬
Thanks I appreciate. long life to you!
I have heard people are having problems with the buttons breaking?Are they durable?
I can’t say I’ve had that problem personally from both of mine.
I did however have that on the Racer
Thanks.
Why wouldve it made better if it had a brushless motor?
More reliable, overall performance
Do you know how it compare to the emalla grand and peak solice pro? I’m stuck between these 3 machines and don’t know which one to purchase
I can’t say on the Solice Pro but between the Grand and Fold, my vote is fold, it wins on price and it’s a lighter machine
@@ChrisRavage thanks so much for the quick reply, I appreciate it!
Should also take in consideration the life of the machines not just the price thought. Quality before quantity
The one true versatile machine or do you mean for budget machines? What about the Axis Valhalla? I think it's a very versatile machine.
Doesn’t that only have 5 stroke lengths? This has 7 which makes it the more versatile imo in comparison to that particular machine. Just remember this is a Dragonhawk review not a Axis review so I’m only taking this machine into account when I do them 😬
Still use is as ur main machine???
I still use this machine yes along with others
Just recieved my "year of the dragon" edition foldpro, excited to use it! Especially after seeing all the review
Got to use it today. Its a beauty 💜
Got my Year of the dragon yesterday. I agree pure beauty 😍
How’s it been holding up?
@@musoehcr so far no complaints to be honest. Usually manage a full day sitting on a fully charged battery (depending on the type of work)
Does lose its punch when the battery's getting low, but I think that happens with most wireless machines. Line work, spot on. Colour packing spot on. Its a good all rounder.
Bare in mind I'm only a year back into tattooing after a good 5 year break. I'm new to rotary.
disposable grips that fit?
As far as I’m aware Dragonhawk have disposable grips for coreless machines and this is coreless
Whats about mast archer ?
Which one is beter ?
@@haidartattoo4643 review next week
I dont get why you are surprised about that sort of stroke length change??
I mean…Axys Valhalla,Stigma Spears has done it years ago…
Why?
Why not? 😬
@@ChrisRavage dont get me wrong..ofcourse why not 😅..but i was just surprised,that you of all people,seems to be in aw of the stroke system..while there are loads of better machines have that already..
And for that price i would go for Stigma with the 8Watt dubble bearing motor
@@roytumbelaka essentially it’s a review and although my thoughts are 100% true and honest it is still a review and a selling point of this particular machine. I have to do the review with just this machine in mind, nothing else and with it been a feature on this particular machine, I’m going to get excited about like it’s the only machine that does it..I hope that make sense.
I got this one. This one really good machine. All around machine and nice but i think not strong enough if you used thick needle. Best machine i ever used and most affordable 🔥
I’ve used it up to a 14 with no problems..this machine will push 18 no problem with the right voltage and hand speed 😬
I’m looking for a good/decent machine just to start out and practice with , would you recommend this?
@@ChrisRavage other people say that the wheel is falling off
@@roberfred760wdym the wheel?
Paid advert?
Nope, but even if it was, I have more integrity than that, to myself, subscribers and people who watch this to do a fake or bias review for money 😬😉. It’s just a genuine review
Is it a direct drive?
No!! It's flywheel. All stroke adjustable is flywheel
@@nuttsrisukplung1318isso é bom ou não? Estou esperando a minha chegar, me dê boas notícias kkkkkk
Chris you are the man for the reviews, also rocking those glasses brother
Looks like a great bit of kit forom the review.. my only concern with these machines are the longevity of tge motors.. ie burning out etc..
But bar that the functionslity is fantastic.. goes to show how simple this stroke adaption technology could and should be for the high remanufacturers.. if these Mast guys can include it and charge this price.
I'm guessing it's one a those things they could do.. but then we'd all come to expect it... meaning they could no longer sell us multiple machines.. there's a word beginning with C that ends with an abbreviation of the word NUTS.. that springs to mind🙄😂
😂😂😂
Would you choose this over mast archer???
Can you shade with it at lower volts
Why have other reviews said it lacks power compared to brushed ? idk what that means.
Brushed motors are just more reliable. But this machine does not lack power, unless you are wanting something that hits like a truck