So glad to find these. I had visited Jerry in his studio in Prescott back in the early 1990s, and purchased a lot of his tools. I had a problem getting a shot out of the shot plate, and it's been stuck for over 10 years. Thank you so much for posting these!
That was such a good video and I'm sure Jerry appreciates you so much. I'm still building my studio up and appreciate all you artists who are willing to share so much. Thank you. I haven't looked up Jerry's website yet but I just took a peek at other people's posts and they mentioned Prescott. Omgosh I just moved to Prescott, AZ a year ago and have had a hard time with the move. I decided once the family was situated I needed something for myself and I was ready to move from beading to metalwork of which I have wanted to do forever. This is so cool.
Do you anneal in between some of these blows? Also how do you straighten the metal around the pattern? Beautiful, thanks for doing this demo I had been curious how these tools work!
Jerry - I just received your teardrop m/f stamp set and have used your 2 piece stamps before. I am using 24g. silver and the edge of the teardrop keeps breaking through on the side. Do I need to use a heavier gauge silver? Love your tools!!!
I'm still getting the balls stuck in the smaller deeper flowers in the plates. I actually got the very exact same tiny one totally stuck. It seems like the silver balls are either to hard or my nail sets aren't sharp enough to grab them to pull out. Any ideas?
About three weeks ago I bought a Tucker Tools shot plate from Monsterslayer. No instructions came with it and now I have a piece of sterling STUCK and it absolutely will not come out. A few people online told me I was suppose to oil the plate before using it. If only I had known that in the first place. My advice to you - when you do buy a shot plate - is to oil it immediately with 3-In-One Oil or coconut oil. (At least that's what I've been advised.) I hope one day I will get this piece of sterling out! I've tried using an awl, nail set, screw driver, freezing, and on and on.
These links don't work. But that's OK, I finally found your video that shows how to put oil on the shot plat and use a nail set. The problem is, I used the shot plate without oil (I didn't know that was a bad thing to do.) and now the silver is stuck and will not come out no matter what I do. Oh well, I just won't have that one die to use. Hopefully the others will work like they should once I put some 3-In1 Oil on them. Thanks.
This is so awesome!!! I LOVE the Indian jewelry making book and this video is like reading it in real life!
how lucky to have him in your studio. this is awesome.
So glad to find these. I had visited Jerry in his studio in Prescott back in the early 1990s, and purchased a lot of his tools. I had a problem getting a shot out of the shot plate, and it's been stuck for over 10 years. Thank you so much for posting these!
I can't wait to own all of Jerry's great tools! One piece at a time! Love them! Thanks Leslie for another great video!
That man can work a hammer!
Thank you for sharing all your awesome stamps with me 🥰 and yes I’d Neal or niel or Nile before bamming 💥
That was such a good video and I'm sure Jerry appreciates you so much. I'm still building my studio up and appreciate all you artists who are willing to share so much. Thank you. I haven't looked up Jerry's website yet but I just took a peek at other people's posts and they mentioned Prescott. Omgosh I just moved to Prescott, AZ a year ago and have had a hard time with the move. I decided once the family was situated I needed something for myself and I was ready to move from beading to metalwork of which I have wanted to do forever. This is so cool.
Gorgeous ! Another unforgettable tutorial...
Amazing
THANK YOU for making this video.
Beautiful Bracelet ❤️
I love the co1 male and female ❤️🤟🏻🥰
I’ll know I’ve arrived when I buy your tools ...
The Riddler approves of this video.
thank you..very helpful
Tucker tools are now available at Thunderbird supply company www.thunderbirdsupply.com/tucker-tools
Very nice
very kind compliment, thank you!
Hi, can't you use the hydrolic press? Thinking you could not so sure though.
Sure you can I have a free you tube vide on that
Just discovered these. Are yall making more?
Look for Hector Ortega on Facebook tell him I sent you he makes these days also
Hello from Finland. Where can i buy these stamps? Web address don't work
Did you try monsterslayer.com? If they dont have them I really do not know.
How are the stamps made? Are they poured or cut?
Do you anneal in between some of these blows? Also how do you straighten the metal around the pattern?
Beautiful, thanks for doing this demo I had been curious how these tools work!
No Jerry didn't anneal between blows he shows you how to straighten out the metal on the other video called let's make a boho cuff..
Jerry - I just received your teardrop m/f stamp set and have used your 2 piece stamps before. I am using 24g. silver and the edge of the teardrop keeps breaking through on the side. Do I need to use a heavier gauge silver? Love your tools!!!
This isn't Jerrys Channel. What gauge are you using If your metal is tearing its probably too thin or your hitting way to hard, try 20 or 18g
@@LeslieKailVillarreal I switched to 20 gauge and it worked like a dream!
I wonder if you put it in a press? Would that be easier
I think the hammer is super easy but you can use a press I have a video on how to use tucker dies too with a press look though my channel.
Leslie Kail Villarreal thank you this was the first video I saw on jewelry making with metal and now I’m hooked! Thanks
I'm still getting the balls stuck in the smaller deeper flowers in the plates. I actually got the very exact same tiny one totally stuck. It seems like the silver balls are either to hard or my nail sets aren't sharp enough to grab them to pull out. Any ideas?
try grinding down your nail set
Where can I order his tools?
www.thunderbirdsupply.com/tucker-tools
where can I buy some blue fuse .help me out..
etsy
Everything I want to buy on Monsterslayer is out of stock! Any timeframe for restock?
contact Tucker on his website google it
About three weeks ago I bought a Tucker Tools shot plate from Monsterslayer. No instructions came with it and now I have a piece of sterling STUCK and it absolutely will not come out. A few people online told me I was suppose to oil the plate before using it. If only I had known that in the first place. My advice to you - when you do buy a shot plate - is to oil it immediately with 3-In-One Oil or coconut oil. (At least that's what I've been advised.) I hope one day I will get this piece of sterling out! I've tried using an awl, nail set, screw driver, freezing, and on and on.
I HAE A VIDEO ON HOW TO TAKE THEM OUT IF THEY GET STUCK using a nail set!
Could you provide the link to the video? I tried finding it and cannot. I even subscribed to your UA-cam channel and visited your website. Thanks.
These links don't work. But that's OK, I finally found your video that shows how to put oil on the shot plat and use a nail set. The problem is, I used the shot plate without oil (I didn't know that was a bad thing to do.) and now the silver is stuck and will not come out no matter what I do. Oh well, I just won't have that one die to use. Hopefully the others will work like they should once I put some 3-In1 Oil on them. Thanks.
where do I get the silver balls?
Melt a pice if fine silver wire on a charcoal block
Hello, I couldn't open your site monsterslayer.com, is there any problems? I want to purchse some tucker tools, thx.
that link works fine what's the problem? search for stamps and dies once you get in.