Would have liked more details on the following: No explanation or close-up detail on how to measure and cut panels to allow for seals. It appeared that when you cut the miter on the seals you measured back some distance from the actual corner. How did you determine location of angle cut on seals so miters meet on all 4 corners? What type of seal glue and how heavy or light to apply it? I already knew how to change a saw blade, didn't need that. Basically, slow down to normal speed and add some detail on the measurement aspects. Thanks.
@@mikeydesilva8197 IM A TRAILER MECHANIC AND HAVE REPLACED LOTS OF DOORS, THE ONLY DIFFERENCE IS..... I DONT USE A CRANE, DONT USE A FORKLIFT AND DONT USE ANYBODY TO HELP ME I LIFT AND INSTALL THE DOORS ALL BY MYSELF ,BELIEVE IT OR NOT!!!!
thanks for a great video. my ice cream truck has a roll up door and i’m looking to do a conversion. i was wondering what the locking mechanism/latches is a called with those two bars. also was wondering if you knew where i could find such parts along with the hinges.
Door cams locking hardware ,I will build cams according to hight of door frame . We stock hinges and other parts. Goggle Heavy or truck and trailer parts for your location.
I just installed my door I ripped off. Let me tell you them things are heavy. I did it with my wife’s help. Btw what is the grey gasket called? Mines ripped off
YOUR WRONG, IT DOESNT WORK THAT WAY, IF YOU DO THAT HOLES WONT ALIGN WITH HOLES ON THE HINGE,SND TO MAKE IT ALIGNT IT WOULD BE A HASSLE, AND IF THEY DO ALIGN CHANCES ARE YOUR NEW DOOR WILL BE SAGGING OFF THE DOOR FRAME DO TO WEAR ON THE HINGES!!!
I appreciate you making this video. i needed to learn how to install the trailer door. thanks.
Thank you for such a detailed and great video!
You are so welcome!
Would have liked more details on the following: No explanation or close-up detail on how to measure and cut panels to allow for seals. It appeared that when you cut the miter on the seals you measured back some distance from the actual corner. How did you determine location of angle cut on seals so miters meet on all 4 corners? What type of seal glue and how heavy or light to apply it? I already knew how to change a saw blade, didn't need that. Basically, slow down to normal speed and add some detail on the measurement aspects. Thanks.
Can you convert a roll up door trailer to a barn door trailer? If so what would be a ball park figure for that?
Yes indeed the door look fantastic! I wish we had a overhead crane, unfortunately we used a forklift..😬
We use to get a couple of guys pick them up, place them in the frame and go from there .
We still use 2 guys. What's the best way with a forklift?
@@mikeydesilva8197 IM A TRAILER MECHANIC AND HAVE REPLACED LOTS OF DOORS, THE ONLY DIFFERENCE IS..... I DONT USE A CRANE, DONT USE A FORKLIFT AND DONT USE ANYBODY TO HELP ME I LIFT AND INSTALL THE DOORS ALL BY MYSELF ,BELIEVE IT OR NOT!!!!
Seen some do that.
thanks for a great video. my ice cream truck has a roll up door and i’m looking to do a conversion. i was wondering what the locking mechanism/latches is a called with those two bars. also was wondering if you knew where i could find such parts along with the hinges.
Door cams locking hardware ,I will build cams according to hight of door frame . We stock hinges and other parts. Goggle Heavy or truck and trailer parts for your location.
Hola una pregunta q tipo de pegamento usaste para las juntas?
I've got a 99' Wabash I gotta make doors for soon. I was wondering what were your measurements to cut the door
I will make a video how I measure doors for frames as there all different.
ua-cam.com/video/7HdFB_1lpiA/v-deo.html check this out
hello good video.
a question what kind of adhesive are you using to stick the gray plate in the corner
Vinyl adhesive by 3M
What’s the gray thing around the door called? And where can I get it in the U.S.?
I just installed my door I ripped off. Let me tell you them things are heavy. I did it with my wife’s help. Btw what is the grey gasket called? Mines ripped off
You can for me know where you buy seal cover around for this door?
Where are located?
How much time you usually take for a pair of composite doors?
8 hours
What did you use as far as main door material? I'm attempting to fab rear barn doors on boxvan Thanks
3/4 inch plywood door panel alum skin both sides
hellow what adeshive you used for the corner tap
contact cement
How much do you guys charge for a job like that?
Is that wood u use or what kind Material u use to make the doors
We buy door blancks cut to size.
@@mikeydesilva8197 thks
I found using the old door as a template was easier
Hello
What is the height of the door ?
Can't remember , can say most barn doors very in height. I will use the old door measurements to build the replacements.
Thank you , whats your location?
Ontario Canada
Where could you buy new latches?
We call them door cams ,there made for the door frame.
Where are you guys located
How many hours to build 1 door?
2 doors in a work day depending hardware ,3 1/2 to 5 hours
That’s sad bison have terminals all over Canada with repair shops and they gotta outsource a dry van door replacement 😂😂😂😂
They don't know how .
How long did it take you to RR?
8 hours
Did many 👍
How many pounds does it weigh.?
Guess 100 + pounds maybe better.
there's an easier way to do this use the old door as a template for all the holes
True and sometimes there's no door or doors to template .
YOUR WRONG, IT DOESNT WORK THAT WAY, IF YOU DO THAT HOLES WONT ALIGN WITH HOLES ON THE HINGE,SND TO MAKE IT ALIGNT IT WOULD BE A HASSLE,
AND IF THEY DO ALIGN CHANCES ARE YOUR NEW DOOR WILL BE SAGGING OFF THE DOOR FRAME DO TO WEAR ON THE HINGES!!!