How to setup active crossover in 3-way mono and stereo mode for PA
Вставка
- Опубліковано 7 жов 2024
- This Video explains how to use a active crossover to route the Higher , Mid and lower frequencies to tweeter , woofer and 2 subs. It also explains how to configure the crossover in 3-way stereo mode for live sound reinforcement in house of worships or any other Live Events applications.
Links to the books I highly recommend you guys to read :
1: Yamaha Sound reinforcement Engineering .Link to Amazon : goo.gl/0rPD8q
2: Live Sound Reinforcement - Hunter-Sark Link on Amazon : goo.gl/Oahx7o
3: The Mixing Engineer's Handbook: Fourth Edition
by Bobby Owsinski Link on amazon : goo.gl/aNraBI
4:The Recording Engineer's Handbook 4th Edition by Bobby Owsinski Link on Amazon : goo.gl/v9bsUi
5: The Mastering Engineer's Handbook 4thEdition by Bobby Owsinski Link on Amazon :goo.gl/1jIytx
6: Music Theory for Computer Musicians
by Michael Hewitt : Link to Amazon : goo.gl/pk3WhN
Like and share my videos and subscribe to my channel. Thanks for watching.
I just want to THANK YOU🙏for your well explained video! 👏😊 Thank you so much for taking the time to do such an in-depth demonstration along with your explanation. Many of the things I've been trying to learn prior to this video in the field of audio have become so clear now, especially when you began to turn up and down the audio levels. I look forward to seeing more of your videos! 😊
Sure , glad to hear it helped and you liked it , l’ll certainly make more videos .
i like to watch this demo again and again and again. . . very useful for me as a sounds system user. . .
Thanks and blessings for this video you help me from afar when I couldn't get help close Bristol uk
Glad to hear it helped you , thanks for watching
Thanks for this video. I have an exam on this shortly and I’m pretty sure this was not covered.
Thank you sir, that helps a lot then me Trying to figure it all out
Glad to help
Great video. Love those EV's they are like a hifi speaker....
wondering were my Bheringer Compressor and my Behringer virtualizer would fit in here.
Looking forward on your video on ringer for microphone setup.Very clearly understood and Helpful video . Thanks
+Lilibeth Mowatt Thanks for watching
Good jobs my friend very good explanations like no others thanks a lot.
thanks for the tutorial
friend from the Philippines
Thanks you ur video, I have learn some technic...
Gratitude you have saved me some money for that connection
Good man great video all the best from London
cheers !
Your videos are awesome!
Thanks!!
very good video
Sir, you are the best teacher. Very clear and simple explanation. ❤I am learning a lot from you.
Can you kindly enlighten us, for a Active Crossover system, for example, if the Power amplifier for the woofer is 100 watts RMS, then how many RMS watts of power amps are appropriate for mid-range and tweeter? Thanking you in advance.
watch my other videos with this kit i have explained that .
Thanks for the enlightenment!
Thanks for watching and nice comment .
Excellent Sir
It realy helps, thanks for the video...
good tutorial sir thanks for sharing your knowladge....
Thank you very much. You did it in details.
Thank you for the information!!!
Thanks for watching.
This is the best tutorial!
I'm looking to build a new sound rack system for my DJ set. Could please provide guidance on the proper setup arrangement and recommendations. Thank you for your time and consideration.
482i Sonic Maximizer
Behringer CX3400 stereo 2-way/3-way/mono 4-way crossover
Behringer PRO-XL MDX2600 - compressor/limiter
Behringer FBQ1502 - Equalizer
Behringer iNUKE6000 DSP - Power Amp
Behringer EP2500 - Power Amp
Speakers
(2) EV ZLX-15P
(2) Cerwin Vega CVA-118 - subwoofers
(2) EON 515XT
+Benny B , EV ZLX -15p is the best choice you would ever make . For subs i would recommend the EV ELX118p . This pair of speakers and subs would sound amazing & will easily accommodate a small audience of up to 250 people. . As the technology as evolved over the years , you don't need rest of the gear as the DSP , AMP and active crossover are built into these speakers and subs ( with limited functionality at great price ). IF you are a new DJ , instead of investing in a dedicated DJ desk i would say opt out for something like allen and heath qu-32 or behringer X-32 audio desks . This way you will have a studio and live desk all under one hood. The behringer X-32 is amazing because it has MIDAS mic pre-amps built in. Stay away from other behringer equipment unless you are on budget .
SO the summary is all you need is the following for what your requirement is and to be future proof.
1: EV ZLX-15p > two speakers.
2: EV ELX118p > two bass bins.
3: Allen and heath QU-32 or Behringer X-32 desks( both are designed for studio and live environments so your are covered.)
4: Once a master in your profession invest in a DJ desk either by Pioneer or DENON.
hope this helps in your purchasing and decision making , if any further question then please feel free to ask.
Thank you for advise. I will definitely take action on your recommendations. Again. Thank you.
+Benny B , No problem at all . good luck with your setup :)
wow this was right on time good job.
Cheers , Thanks.
This is really good Sir ,highly informative .Thanks
Cheers , thanks.
Thanks! Thanks Thanks! Congladuation
Fantastic video.
Thanks for watching
excellent demo.very easy to learn thanks for sharing bro.
Cheers!
Great video, straight forward, and simple to follow! If i may question one thing... shouldn't your three amps be stacked according to use.. High freq. on top, mid freq. in middle, and low freq. at the bottom? Or is yours just racked this way due to the depth of the high freq. amplifier. I guess if it was racked at top, you would have problems getting to the terminals on the other two..
HI , thanks for watching the video , amps can be stacked in any order as long they are routed correctly to the destined speakers for required frequencies . I just stacked them this way for demonstration knowledge purpose .
thanks. good knowledge. loud and clear
Thanks brother i got more knowledge from yours VEDIO. Thanks again thanks.
Kapila Ranjith uh
Kapila Ranjith please can any one let me know that what is the purpose of cross over please bcz am new to this subject
Please do more
Thank you, it was good, do more video for beginners.
Good video Bru!!!
Hey, thank you so much
thanks for watching.
i enjoy ur lecture
Hi, Your video teaches me alot , learnt few things but still unable to use my dbx 234xs crossover properly , I need quick help from you , please reply me asap , here is my question
I have dbx 234 xs crossover , sound craft 16 channel mixer, and 4 subwoofers , 4 mid speakers, 2 high speaker(hf's) and the amps to drive them.
I cant produce best quality output with by using my active crossover, the crossover has 2 freq knobs one for low freq and other for mid freq, I can not make use to produce best output with that . Can you please make a video to demonistrate this or else any diagrams ?
Please tell me how to connect 3 way stereo mode using dbx 234xs crossover for my setup.
Right now I am using the following way without crossover
1. Mixer L output to Mid speaker amp ch1 and then ch1 output to input of my second amp ch1 which is using for another mid speaker
2. Mixer R output to Mid speaker amp ch2 and then ch2 output to input of my second amp ch2 which is using for another mid speaker
From groups section of the mixer
3. Mixer group1 to sub woofer amp ch1 and then ch1 output to input of my second amp ch1 which is using for another sub woofer
4. Mixer group2 to sub woofer amp ch2 and then ch2 output to input of my second amp ch2 which is using for another sub woofer
5. Mixer group3 to hf amp ch1
6. Mixer group4 to hf amp ch2
Please correct me If I am doing wrong.. also I hope you will explain how to connect stereo mode with dbx crossover and its front panel functionality.
Thanks,
You liely did it nicely and loudly ?? And I wanted to ask how to set up ULTRARINK PRO 8 CHANEL'S TO 3 AMPLIFIER
you still wanna know or you figured it out ?
Thank you for responding. My question to your response is: are you saying I should use either the compressor or the Equilizer but not both?
dwight horam Your choice Sir :)
It's Good ... I Like This
Wow..very helpful.. Thanks
Good job .
Great video
Thanks!
Thank you
Thanks master
Great vid, curious as I have one of these crossovers. what would you use the 4-way mono mode for? I mean which application would that set up suite.
Give thanks great and straight forward vid.
4 Way Mono is used for application : Low , Low/Mid , High/Mid and High frequencies respectively utilizing both channels on the crossover . Hope this helps.
@@AVMEVideos yes it does thank you
nice
great video..thanks...
vencent silla , Thanks for watching
Can you please use same setup and explain crossover functionality a little bit more for 3 way stereo, 4 way ? I mean how to set crossover freequency , low, mid, high freequencies ? Please use the same crossover on your demo(I have dbx 234xs but I am unable to use it properly as I had lack of knowledge on it, so thats why I request you use the same crossover on your demo)
.... hope you reply me soon
This is great. Thank you for showing. DO you have a demo for YAMAHA MG116CX, BEHRINGER, FBQ 6200 Equalizer, ALESIS 3630 Compressor and BEHRINGER CX2310 Crossover. I am using 2 BEHRINGER EP2500 amplifiers. My 2 subs BEHRINGER 18 inch passive ........... Thank you so much.
thank you so much brother
Please do how to design Auditorium PA system by using Speakers,Amp and mixer
Tech-Hub TV , Live events are not happening now a days due to Covid , the fundamentals for connections are the same . In Auditorium routing is required for different tasks for distribution of audio signals. Will make a relevant video in few months time keep an eye on the channel.
thanks learned much
Thanks for watching
Thanks ....bro....it would be very much helpful ...still it should be slightly comprehensive...any ways worth watching this video. waiting for more videos......thanks again.. keep it up...***
Sure thanks bro for watching , i make videos on demand, so if anything you would like to know technically then ask for it here on the channel & if resources and equipment becomes available then i'll make the video.
Hello... please let me know, how to set up crossover in mono,and stereo
mode for my system..... I am having following equipments ...all Behringer
make 1) Xenyx 1202 FX Mixer. 2) CX 2310 Crossover. 3)power Amp. P 7000
II .4) pr. Amp. Europower EP 4000 5) Four speakers Eurolive VP 1800S/1600
w 6) Two tower speakers VP2520/2000W ....So please guide me as
to....with all above items, how can i deliver a best mono and stereo
sound with my existing system, also advise me in case anything additional
needs to be added. You can email me diagram of connection. awaiting your
quick response...regards.. Thanks.
Good explination
Hi, I have just found your videos and I like many of them. I have a question about how to ringing out your speaker with EQ. I don't find many in UA-cam related to this. If you could help me with that could be a big help in my church, thank you.
Peradin Sinaga Thanks for liking the videos. Its called ringing out the microphones with GEQ ( graphics EQ) during sound check by eliminating the frequencies causing the feedback, It is really necessary practice during multiple microphones setup in a live event because during the Event you don't want any feedback etc. Now a days almost all digital desk comes with built in GEQ but if you are using analogue desk then you have to use external GEQ . I will make a video and upload it soon .
educating Video
Good man
Good job sir.
Cheers !
very good
Thanks for watching .
good job
Thanks.
great video!!!!! how would add a pair of monitors. Thank you!!!
Drink every time he says "uh". But thank you for the video very helpful. A lot of us say uh when recording lol
Thanks for watching
🥴
usefull video
Sorry to bother with this question, do you have a video of how did you connected your poweramps, crossovers, graphic equilizers. Like what wire goes to where and all that.
Yes , browse through my earlier videos and you will find one.
MY OCD is killing me... PLEASE put a screw on that rack damn it !!.
please demo for 2 way setup at behringer crossover cx3400
sir can you make a 2 way stereo set up,what is your low cut off in stereo 2 way?
low cut off is a term used to cut off low frequencies ( usually 20Hz to 120Hz) in an audio signal chain usually referred to as HPF ( high pass filter ) not be confused LPF which is for cutting high frequencies ( usually 10kHz to 20kHz ) .
@@AVMEVideos example sir in a crossover freq,how about in a 2 way set up?is that 140hz or 240hz?
I specifically made that video 9 years ago , here is the link : ua-cam.com/video/35ShkaBQQAI/v-deo.htmlsi=mUGySB6VdMWp4xw6
Will you have a video to just connect amplifiers to speakers and mixer?
Raul Alvarado Hi Raul , its already on my channel , here is the link to the video ua-cam.com/video/PEXRIowpz8A/v-deo.html . The signal flow for your setup is
LEFT XLR output from your mixer goes to channel 1 XLR input on your amplifier.
RIGHT XLR output from your mixer goes to channel 2 XLR input on your amplifier.
Channel 1 speakon output from your amp goes to speakon input on your LEFT speaker.
Channel 2 speakon output from your amp goes to speakon input on your RIGHT speaker.
Thank u so much!
Hi. Brother. Can you do some video. How to connect drive rack PA2 to crossover?
With one amp driving the subs/lows....Can i split the mid & high frequencies between another two amps to a set of speakers, when the speakers have built in tweeters and two separate speaker connectors at the back?
He is a dummy!
hi thanks for the video i have 2000w xti crown amp i just want to use one 400w bin and one 300w top with eq and xover would the amp be to powerful thanks.
Hi Avme i waiting 4 ur reply
thankyou
Philip Mendonca , I have already answered your question about making connections between your mixer and 4 powered speakers in detail . The answer is on the video comments on which you asked the question. Thanks.
hopefully, you have everything in mono at the mixer stage otherwise you are just losing mid and high frequncies of the Right channel doing it this way. Two subs to one mid and high seems excessive, but if thats what you need to do keep all program material in mono.
Please I need to know more
good one.
thank you so much for this video. it tells us a lot. i have behringer B 215 XL speakers which are 2 way speakers and Seismic Audio subwoofers which are low frequencies. can you please give an idea how to hook them up and how to set the crossover cx 3400. the 2 way speakers B 215 XL are they low and mid or high and low frquencies? thank you
Frequency response of B215XL is 55Hz to 20Khz so it produces all frequencies in that spectrum range so use it as high/mid speaker and use your subs to produce LF. The setup is really simple , just follow steps in this video ua-cam.com/video/35ShkaBQQAI/v-deo.html.
PLEASE CAN YOU HELP ME HOW TO CONNECT A MINI STEREO AMPLIFIER TO A MULTIMEDIA SPEAKER
Good video, so I assume I can only adjust my subwoofer volume through the amplifier?
No if you have three amps you can adjust volume of subs , mids and highs.
AVME Videos OK I have 2 full range 3way tops in one amp and 2 subs in the 2nd amp. I was hoping to get individual level control of each on the mixer... I guess I'll need to individually control volume only though the amps themselves not the faders on mixer
Basically both , that is called gain structure . You don't want low , mid , high frequencies to be distorted or clipping. For the sake of the explanation let's say you have just one input of music play back output to main L/R bus via one fader. Put the fader to 0dB , Main L/R to 0dB , crossover to 0dB , output on your amps to 0dB. Now start adjusting the input gain of music playback channel till you see 0dB on the input Signal meter. Now you can control the signal going to the L/R bus via channel Fader ( how much you would like to send).
If you have multiple inputs , outputs , crossovers and amps then the same formula applies , the amount of signal you want to output to different Mixes. Best way is to practice this during your setup to achieve the optimum sound. Notching a dB here or there on different devices would get you the desired sound.
Please thanks for you video ,, but i have 2 amp .. 1 for 2 subwoofer .. and 1 for full range Ev 215 ..I have crossover DBX 234XL ..what stero mode should i use and How ... because my fulll range have only 1 input port .. the high and mid i dont know how to set it ...
I just want to asked one question. What if i set 3 power amplifier for reinforcing each frequensi. Which is 1st amplifer for driving high frequensi. 2nd amp for low and 3rd amp for sub. I mean 1 amp is handling L n R out put from crossover. So high out put ( L&R) is go to input of amp 1.
Mid frequensi (L &R) connect ti input of the 2nd amp(L&R).
Then the low/ sub frequensi output from crossover (L&R) connect to input of the 3rd amp (L&R)..thank you
Hi , You have answered your own question correctly :)
sir may I request you to please have also a demo on how to connect or setup the behringer super x pro cx2310. thank you
Dear , How you would like to setup your crossover ? in stereo or 3 way mono mode , I don't have x pro cx2310 to hand for practical demonstration but if you tell me about all the devices in your setup and what its for then I can write a signal design for you for your setup.
AVME Videos i want to connect my cx2310 xover to stereo. i have 2 active speakers for mid-hi section and crell ca20 for low frequency, 1 unit 231eq and 12ch behringer mixer. i have watched your video but your xover looks a little bit different at back panel. maybe you can give me a diagram on how to connect it and i will try it my self. also please give me the instructions on the gain settings and buttons to turn on at stereo mode...thank you and hope you may help me do the job....God blessed you....
Okay follow the below signal flow.
1: L out of Behringer Mixer to CH1 input on 231 EQ.
2: R out of Behringer Mixer to CH2 input on 231 EQ.
3: CH1 out of 231 EQ to CH1 inout on cx2310.
4: CH2 out of 231 EQ to CH2 input on cx2310.
5: on the back of cx2310 there is a mode button make sure it's pressed and in stereo mode & make sure crossover frequency tab x1 is selected ( not pressed position)
6: cx2310 CH1 high output to L active high-mid speaker.
7: cx2310 CH2 high output to R active high-mid speaker.
8: cx2310 CH1 low output to L CH1 crell ca20 amp to bass bins .
9: cx2310 CH2 low output to R CH2 crell ca20 amp to bass bins .
10: On front of cx2310 select crossover point in range of 70 to 100hz , don't go above it as you would get lyrics from bass bins.
thank you very much brother for the info ...i'll try it .... but i am very sorry for a very long delay on my reply coz i've been from a long vacation....thank you any way...
jay balangue
thanks for this
Hi, im abit new to sound system settups, thanks for this video, ive got the same crossover im trying to connect up 2 passive tops & 2 passive subs, where does the sub connection go from the crossover, and do my speakers just go into my amp thats connected to the crossover, ive just bought this system & for the speakers ive got a few splitter cables or bridged i think you call them:) and with this lot is this 3 way? sorry for my newbie ness:) Paul
Aye thanks for the video, but I just want to ask if I could parallel from speaker to speaker connecting from crossover, is it possible?
Iosia Pati , yes it's possible. just take a output from ch1 on crossover , connect to amp input ch1 , output to 1st speaker then from 1st speaker to 2bd. make sure ur amp supports the dropped impedance and added watts of 2nd speaker per channel. let me know how it goes.
hi, thanks for the video, its quite helpful but can i connect a 3way stereo with only 2 full range speakers and 2 subs only, without setting up the third small speaker. maybe using bi-wiring? please explain
3 way stereo is like tri-amping , you would need a 3rd pair of speakers to be used as tweeters & a amp to drive them. Just stick with 2 way stereo option with your full range speakers and 2 subs and you would get good sound.
Please I have DBX 234XL and I have 2 amp ... 1 for 2 sub woofer .. 1 for 2 full range EV 215 .. How can I connect the high and mid output to amp that operate the full rage ... I am new to this and i do this for my church ..
Mixer L out to CH1 on dbx 234XL. Mixer R out to CH2 on dbx 234xl. On back of dbx 234xl make sure it's on stereo mode and x10 freq switch is off. From dbx High output from CH1 to 1st amp CH1 input then out to L side EV 215. dbx low output from CH1 to 2nd amp CH1 input then out to L side sub.. From dbx High outout from CH2 to 1st amp CH2 input then out to R side EV 215. dbx low output from CH2 to 2nd amp CH2 input then out to R side sub.Then on front of dbx crossover between 70 to 80Hz and adjust the high and low outputs level as required. Let me know how it goes.
Thanks Sir .. I was very sick the past week i was attack by armed robbers and they beat me up .. but glory be to God my vision is okay .. I will set it up and anything i will get back to you .. God richly bless you for your kindness
Good
virtual todavía no hay?
Great Videos!!!
I would like to incorporate video (with TV, Surround output) in my setup and would love it if you could do a video or input on the best way to do so. Based on my research I would need a AV Processor and another Amp.
Current equipment: 1 Behringer EP4000, Behringer FBQ3102, Behringer CX3400 all supporting my Numark NS7III DJ controller.
Sure , watch this video ua-cam.com/video/u43G5JVyGjk/v-deo.html
Great!!
I ran into 1 issue so far. In order to connect the line out from Receiver to the crossover I had to disconnect my DJ Controller from crossover. Is there any option to not have to do that? Do I need a Crossover with dual Inputs?
The crossover should sit before the amps. So line out from av reciever to dj desk then out from dj desk to crossover then crossover out to amps to speakers.
Also where in the chain would the EQ reside?
PEQ has to be right after mic pre amp or line level input of a source , GEQ is used for conditioning the room for eliminating feed backs etc so sits just before the amp as 2nd last device in the signal chain of simple L/R setup..
What was that song you used in testing...... I love that.
+Terry Dee , Forgot bro !
Thanks anyway...... Good Video Tho !
+Terry Dee - Contact by Glenn Morrison
Sir how can I fix mixer with one crossover with two amplifier with one equaliser
Hello AVME! great Video but i need help! i have a Behringer Super x pro CX2310, my rig consists of 2 Mid+High active cabs and 1 passive sub. How do i use this crossover to send mid and high to my tops and sub seperately? i do not have seperate mid and high cabs as they are active PA Heads so i use Mid and High in the same cab! any help would be appreciated, thanks
great video. I just want to ask. if my amps have enough power. can i use 2 amps to split my highs, low mids and lows. by linking my 2 high frequency speakers and using high to channel one of my amp, linking my low mid speakers and using low mid to channel two of my amp, then connecting my low speakers to my second amp to both sides of the crossover as you demonstrated?
Yes you can , Do daisy chain your Highs to Ch1 on amp 1 then daisy chain your Mids to Ch2 on amp 1. Make sure you calculate the total Rms of your highs is less than your amp 1 RMS wattage on Ch1 and respectively for your mids for Ch2. Also by daisy chaining the resistance will be dropped so the total resistance (Ohms) of two speakers divide by 2 should be supported by your amp.
good vedio Thanks
Thanks for watching !
Thanks for your video, We Using EV full range & And EV subwoofer, we're using dbx 234XL Crossover, So we have set it in 2 way stereo mode, Because we have 2 AMP, 1 for full range, 1 for subwoofer, Now we're having the bass coming in to the Full Range, How should we set the dbx 215s Dual Channel 15-Band Equalizer, for the full range and the subwoofer,,, Please Our Crossover Back panel setting is in 2 ways stereo, Using the High out for full range & Low out for subwoofer ... Please we need urgent help holding a crusade on 29th March to 31 march this month 2017.
What kind of XLR's are those?
Can i use 2 crossover and amps for multiples subwoofer
Hii brother, brother Yamaha mgp24x to 4 amplifier connection brother with subwoofer amplifier, s
8-way ke liye kon si company ka sound system sahi rahenga
amplifier
mid
base
???
Look for L-ACOUSTICS or d&b audiotechnik products , good luck.
Can you use one cross over for two amplifiers
@@danielodey8813 , Simple answer is yes , depends what you want to achieve .
Hi brother, how can I setup my dbx driverack pa2, crown xls 1502 amp, allen and heath mixer to my marantz SR 6013.
read the manuals and follow my videos it will get you some where , if you need one 2 one live consultation regarding setup then email me,.
atleast I know how to use a crossover