I usually watch the ads before your videos, but this one was going to be 5 minutes long and it started with a guy with onions wrapped on his feet. Nice video!
I usually do. I have waited quite a while before. I once watch a 5 or 6 minute long Purple mattress commercial. However, I draw the line at a guy having onions wrapped on his feet.
I found out yesterday that you can smooth 3d prints using an evaporated solvent. The one I saw used acetone on abs, and the print came out with all of the layers smoothed over. If you want to try it out look for "Acetone Vapor Bath". As long as the print is abs, it should work. As for other plastics, you'd have to use their solvents.
I have 3 nerf stereotype ideas! the shotgunner: The guy who only uses shotguns the Star Wars fan: The guy who always brings a Star Wars blaster to his nerf wars The flanker/sneaker: The guy who somehow gets behind the enemy team
I actually planned on getting a camo edition Apollo and the 3d printed kit for it but recently got a Helios and I actually much prefer keeping my left hand on the bolt grip and aiming the blaster that way. That being said, I don't focus on rate of fire when using springers and only really use them as a secondary when I don't need a flywheel primary to spew foam fast.
i got this blaster yesterday.. it works well , fast and accurate ..but i bit disapponted about the quality of the bolt.. not so solid,smooth and tough as i hope that was nerf rival line..blasters
Pretty late reply but here you go: www.amazon.com/WORKER-F10555-No-196-Phantom-XVIII-700/dp/B07SC6DSX4/ref=mp_s_a_1_2?keywords=Helios+mod&qid=1575703800&sr=8-2
maybe with a little bit sanding and smoothing you could at least reduce that atrocious noise, or use a megaphone and just make the entire enemy team deaf xD
I've noticed that scraping sound on quite a few 3D printed sliding components. Is there any way to minimise that noise? Like with lubrication or sanding?
not true, it works fine. Its just under a slightly heavier load, and may catch because of the aforementioned print rubbing. Sand the parts where it rubs down and itll be much smoother, and therefore more likely to work for the auto return
why don't you sand the 3d printed parts that scrape each other so it's quieter, I've never tried it but theoretically it should work. Or just put some lube on the priming grip.
Hey Frank, what about the auto bolt return on the stock helios. How does that affect the pump action. Wouldn't the internal spring shoot the priming grip forward once it got to the back???
If you had it, I would've used a Retouch3D variable heat knife to smooth out the areas that cause that terrible friction noise of the 3D printed parts.
The sound of that blaster priming is making my love birds noisy! No joke. It sounds almost exactly like a love bird call.
Fellow lovebird owner reporting in and I completely agree!
What type of love birds you got? Mine dont make that noise but then again mine can talk :p
This is my opinion it sounds like death
@@coolbee548 .tnyby
yep
“squeak squeak”
Did you mean:
_squeak squeak_
*squeak squeak*
-squeak squeak-
Pump action sound effect of mod Helios
Not as bad as the kit from the eBay Apollo
REEEEEEEEEEEEE
*even higher squeak*
Dogs come running 😁
If the original blaster is not good enough,
put a pump or a flywheel on it.
imagine a flywheel pump with that noise? automatic SQUEAK
Pump action springer with an afterburner
You just described the Hypnos and Hera
Just get a Hera for a flywheel
Gotta say I like this kind of coop video. No memery, just a straight and concise presentation on a neat product. Cheers, Frank.
Mephiston you no like de memery? 😱
You'll have to lube up the pump action area, Franklin.
Dude, lubing 3D printed plastic won't do much. The best way to stop that sound is to just sand down the plastic to make it smooth
R/woosh
Giggity
@@icy3-1 You have committed crime against Skyrim and her people, what say you in your defence?
Hahah lubing the pumping area XD
I usually watch the ads before your videos, but this one was going to be 5 minutes long and it started with a guy with onions wrapped on his feet. Nice video!
homelee665 wait...
I usually do. I have waited quite a while before. I once watch a 5 or 6 minute long Purple mattress commercial. However, I draw the line at a guy having onions wrapped on his feet.
homelee665 suuuuuuuckss
Burger King foot lettuce
i love that ad
I found out yesterday that you can smooth 3d prints using an evaporated solvent. The one I saw used acetone on abs, and the print came out with all of the layers smoothed over. If you want to try it out look for "Acetone Vapor Bath". As long as the print is abs, it should work. As for other plastics, you'd have to use their solvents.
They should include earmuffs.
3d printed earmuffs, of course
To keep that deafening sound from happening try sanding the 3D printed parts
I have 3 nerf stereotype ideas!
the shotgunner:
The guy who only uses shotguns
the Star Wars fan:
The guy who always brings a Star Wars blaster to his nerf wars
The flanker/sneaker:
The guy who somehow gets behind the enemy team
If the helios has a return spring for the bolt does that mean the pump grip can return by itself
vanoss fan 121 yeah, it can. Another youtuber showed that it can be
Yup
Yeah the return spring is strong enough to return the pump though you can get a stronger retention spring if you so desire
GAMING BLAZE, ive got a pump action kit for my Helios, and the return spring works fine
Nobody:
The Helios: WIP WIPE
YEEEEEEEES NEW VIDEO!!!!
I actually planned on getting a camo edition Apollo and the 3d printed kit for it but recently got a Helios and I actually much prefer keeping my left hand on the bolt grip and aiming the blaster that way. That being said, I don't focus on rate of fire when using springers and only really use them as a secondary when I don't need a flywheel primary to spew foam fast.
On these pumpactionkits, have you ever tried lubing and/or polishing the rails to make the action smoother?
Thank you Coop This is the most satisfying video I have seen from your channel.
That cost 3x as much as the gun!
79.99 on sale for me. Im aussie so i dont know if thats aussie dollarydoos but thats still expensive
I tapped on the video as soon as it popped up and still got third view that is a good viewer base coop should be proud of that
The music in this is really calm and soothing, until the gun starts pumping
Firing range lyrics: “Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak Squeak “
Holy crap that sound is so spine chill inducing
Maybe one day, Nerf will actually make a 'perfect' gun that has no issues.
the first song you have there in the background.... whats the name of it? 0:20 or something.. just zap in and tell me pls :D
I Love mods like this where you don’t have to take the blaster apart to install it
It sounds smooth and satisfying.
That noise is so good like I love 3D printed parts. Idk why I like the noise so much
This or the Hades? Hades would be equivalent to having 5 mags ready to go on this but without the reloading.
probably this cause its compact and it has external mags
That's a nice/clean looking kit!! Impressive! :-)
That looks so easy and yet so functional good job
Awesome! Was looking forward to this overview since your last unboxing =)
I love that nice calming music
sanding down a little bit will help to make the noise less loud
i got this blaster yesterday.. it works well , fast and accurate ..but i bit disapponted about the quality of the bolt.. not so solid,smooth and tough as i hope that was nerf rival line..blasters
It sounds like you're punching a clown in the nose every time you rack it. I love it ALL but the sound, not like I need to say it too tho. HAHAH!!!
I was going to buy the pump action kit and it says that it cant find the page
Pretty late reply but here you go: www.amazon.com/WORKER-F10555-No-196-Phantom-XVIII-700/dp/B07SC6DSX4/ref=mp_s_a_1_2?keywords=Helios+mod&qid=1575703800&sr=8-2
All of a sudden I like the Helios
Great looking and functioning kit. Who Disney love that print on sweet print noise lol. Great vid as usual. TkEZ»UK
Fun Fact: Helios and Apollo both were the God of the sun in the Greek mythology
The fact that most of these comments are 4 years old shows what kind of fans coop is dealing with.
that kit looks nice man
Some guys with this kit recommended that you gotta minidrill the barrel into the shell. That said, I need this kit!
You can super glue some fabric/texstile to the grip to disable the sound. Good video!
I love your nerf videos man 😜😋🤪
*WEEP WEEP*
Oh god make it stop.
You could pour a lil bit of oil there and it should be much smoother and quiet
Hey coop you can just put paking tape or scotch take on the priming parts to stop noise
That tacti-cool wheezing noise tho
What a pleasent sound that makes
I really like how you don't have to do anything to the blaster itself... unless those screws by the barrel drill into the blaster any. Do they?
maybe with a little bit sanding and smoothing you could at least reduce that atrocious noise, or use a megaphone and just make the entire enemy team deaf xD
If you sanded and greased the 3D printed plastic you can make it slightly quieter.
I don't think the noise is a problem you can just sand the 3D printing to decrease the sound
AWSOME DUDE NICE MOD
Has anyone else noticed coop is increasing upload rate
Really good vid!
But I’m not really digging the music playing when your putting together the mod (just a preference tho)
I like it
sounds like when you are doing a sim or xbox avatar lol
Love your videos coop😁
almost one million subs
Keep up the good work
#roadto1million
I've noticed that scraping sound on quite a few 3D printed sliding components. Is there any way to minimise that noise? Like with lubrication or sanding?
little late here but some high build primer from a automotive store followed by a light sanding makes a world or difference
The blaster looks nice even just with the barrel piece
Love the videos keep up the good work!
That sound, but btw Nice worker pump kit.
the pump noise sounds like a squirrel dying
Coop772 just use some silicone oil on the priming action and it’s perfect!!!
I would like an Apollo for cosplay though, as you take the mag out, put a fresh one in, and prime the blaster once, like a Famas or an Uzi.
ah... the original apollo pump kit sound returns, WITH A VENGEANCE!!!!
It sounds like a dead parrot but good vid coop
When I was watching this my dog hid in the corner because of the noise....
It would be great if you could do an upgrades video on the helios, like you did with the Kronos. This was helpful thanks!
I love the sound it makes
Awesome vid bro
Coop you should do another range time with Franklin
EVERY SINGLE TIME!!!! *squeak squeak*
It's funny cause I ordered the apollo pump kit one day before I watched this video lol
Early for the tacti-cool kit
Why does the link send you to a link on amazon about dogs? The link doesn’t work
Same for me
same where do i go
Joey Rudolph I found one on the worker website
@@apbraloga yea i got one on eBay along with the red helios its self, expensive but i hope it's worth it
Joey Rudolph I never buy on eBay you always overpay for nerf products
So the return spring doesn't work anymore?
No
not true, it works fine. Its just under a slightly heavier load, and may catch because of the aforementioned print rubbing. Sand the parts where it rubs down and itll be much smoother, and therefore more likely to work for the auto return
That noise sounds like my mom when me and my dad come from mc Donald’s
I swear that looks exactly like the Kel Tec KSG
Coop i have been waiting for an overview of those worker sniper kits or full blaster review for a while
nice video as always bro
why don't you sand the 3d printed parts that scrape each other so it's quieter, I've never tried it but theoretically it should work. Or just put some lube on the priming grip.
it looks so much better
Awesome video!
Even though it has pump action does that still mean it still has a spring return
Would is be possible to sand the sliding parts to reduce the 3d printed sliding sound?
4:41, best modder face
man coop is nice
Can you lubricate the area the pump handle is rubbing against the barrel extension? Maybe it’ll reduce the noise.
do you have to pay extra for the version that comes with the '90s hiphop sound effects with each pump?
would a hot acetone vape bath fix that noise? thanx for showing off the kit, want it.
Erm coop that sound was the last sound I heard when I went to sleep
Oh and a n strike overview would be awesome bro!!
Have you considered sandpapering the slider parts to fix the sound?
Hey coop make a blowgun combos video that would be funny!!!
How many hours does it take you to clean up the HIRs and elite darts after your done shooting for the day?
Hey Frank, what about the auto bolt return on the stock helios. How does that affect the pump action. Wouldn't the internal spring shoot the priming grip forward once it got to the back???
you can put a 12 ball magazine or a 18 ball magazine
into that gun for more ammo
I would be happy with the barrel adapter alone
when are you going to make a review on the prophecy sniper kits?
If you had it, I would've used a Retouch3D variable heat knife to smooth out the areas that cause that terrible friction noise of the 3D printed parts.