One of the best hands on demos of the Stomplab 1G. I have a new Valeton GP200-LT but there's something about those old analog dials and buttons that call me back to my early days playing guitar. Gonna get one before they disappear
Thank you. Mostly the secret to a decent acoustic sound is cutting the mids and highs to where it sounds natural. You can reduce all the eq and just start by raising the bass and treble but not the mids. Get a good tone and then increase the mids a little bit to get a little bit more body in the tone
Thanks for the video. That helped a lot. I was using the unit only to record into my DAW then add effect later. But now I'd like to go beyond the presets and make my own.
Hello, I would really appreciate it if you could help with my question. I want to use this as a pedal in the effects loop of a tube amp. Can cab/amplifier simulation/modeling be turned off? And use it only as a single effects pedal? for using any one of the reverb, delay, phaser etc. And no amp selected. Or it is necessary to select at least one amp type?
I wish I could give a concrete answer to your question Pankaj. I normally get the pedals to demo and then return them. So I don't have one to check it. In the amp simulation option if there is an OFF option then I guess you can use it in the fx loop, if not then it won't be good.
I do believe you pick/tweak the sound you want (active) and click metronome to bipass for direct clean signal. Then turn it on as needed by clicking both bottoms again. That why I bought this pedal-as a single stomp. Tip: save a few user sounds in a row-commit to memory and you’ll have a selection of favourite pedals by clicking up and down. Hope this helped
Hey bro..your videos are a great help...i am struggling to get tone similar to that of avenged sevenfold, can u plz help with it as I've heard it's one of the harder tones in modern metal..
Guitar with humbucker. Heavy amp type with enough gain that it sounds heavy but not so much as gain that it has too much noise/fret noise/feedback. Use generous reverb and slight delay to round off the tone. That'll give you something to work with. Keep the mids low
@@SurjoBhattacharjee it does make sound only when I plug adapter but works fine with the battery but I went to store and it worked fine there even with the adapter plugged in...the interference is pretty annoying
I made 4 patches but when i switch over patches, the level and gain of patch changes. For ex if i switch from U2 to U3, gain of U3 changes den again i need to adjust gain of U3.
Buddy I don't think it'll help talking to me. I just did the demo when I did it. I don't own the pedal and I don't have the pedal since I did this demo.
Jab main adapter use karu tabhi vi kya battery ka jarurat hay.. Or kya battery hamesha rakh sakta hu uskay bad adapter use karsakta hu... Kona bolia please...... Thank you🖤keep rocking
Hi Surjo, Just one question. For exampe in edit mode i choose a Cali 2 amp, or any other amp, now i want to put a blue drive on it. Is this possible or not ? Thanks for your answer.
@@SurjoBhattacharjee Thank you sir, just what i was thinking , I think go put a blues drive pedal in front of the stomplab and i'll get what i want. I bought this stomplab for my son, but next month i go buy the Fender super champ x2 head for me. Thanks a lot for your fast response .
Surjo, i just tried my Joyo American pedal in front of the stomplab 1g. Man, this is amazing. I got the most beautiful tweed tones i ever heard from my amp. Now i can in edit mode choose any amp i want and get with this combination the bluesiest tones i like. Perhaps you can make a video of this, because it is indeed an issue on the stomplab to put a drive on a chosen amp. Just wanted let you know.
Ami new stomplab 2g niyechi Kintu patch gulo moner mato korte parchi na R volume pedal kichu kichu patch e kaj korche na... Tomar contact number ta jodi hoi khub vlo hoi... Ami kharagpur theke bolchi
Thanks! I was ready to start singing Earth Angel when you put on that reverb & started singing - excellent!
Thanks, this pedal has so much potential, just starting to find out all the things it can do
👍🏾👍🏾
One of the best hands on demos of the Stomplab 1G. I have a new Valeton GP200-LT but there's something about those old analog dials and buttons that call me back to my early days playing guitar. Gonna get one before they disappear
Thank you
Great video! Thank you. Good, helpful information.
Very helpful thank you very much🤘🤘
Very good tutorial Surjo, great job for making and sharing - thanks - best I've come across.... just got the iig... now sorted, many thanks.....
My pleasure Chris
Well done my friend! Loves it! And loves your passion and joy from and for the guitar tones! Cheers mate! 🇨🇦👍🏻
Cheers mate.
Thanks for the lesson. Can you please confirm on how to setup semi acoustic guitar so that both lead and chords sound neat and clean.
Thank you. Mostly the secret to a decent acoustic sound is cutting the mids and highs to where it sounds natural. You can reduce all the eq and just start by raising the bass and treble but not the mids. Get a good tone and then increase the mids a little bit to get a little bit more body in the tone
I just bought the 11G today. Thanks for making your video useful and fun!
You're welcome. Have fun
Thank you so much for this clip. I have been playing with presets only for 1 year. Now I can do more with the my effect.
Thank you
Thanks for the video. That helped a lot. I was using the unit only to record into my DAW then add effect later. But now I'd like to go beyond the presets and make my own.
You're welcome
Привет!Активный дибокс ставил в цепи при подключении в звуковую карту?
Great work mate thanks for sharing your knowledge
Thank Surjo. I realy appreciate it.
Great sounding pedal - good explanation thanks
Excellent, son! Nice playing AND singing, as well. Thanks!
Thank you Sir
Hello, I would really appreciate it if you could help with my question. I want to use this as a pedal in the effects loop of a tube amp. Can cab/amplifier simulation/modeling be turned off? And use it only as a single effects pedal? for using any one of the reverb, delay, phaser etc. And no amp selected.
Or it is necessary to select at least one amp type?
I wish I could give a concrete answer to your question Pankaj. I normally get the pedals to demo and then return them. So I don't have one to check it. In the amp simulation option if there is an OFF option then I guess you can use it in the fx loop, if not then it won't be good.
I do believe you pick/tweak the sound you want (active) and click metronome to bipass for direct clean signal. Then turn it on as needed by clicking both bottoms again. That why I bought this pedal-as a single stomp. Tip: save a few user sounds in a row-commit to memory and you’ll have a selection of favourite pedals by clicking up and down. Hope this helped
Can you please put d video, How to add & control various commands by pedal in 11G VOX Stampad.
Thank you for sharing it's very helpful
Awesome video! Does this pedal allow to overwrite the factory presets? User presets are few!
I don't think you can overwrite the presets.
How many custom spaces are there?
Probably the best the demo of the pedal
Thank you
Hey bro..your videos are a great help...i am struggling to get tone similar to that of avenged sevenfold, can u plz help with it as I've heard it's one of the harder tones in modern metal..
Guitar with humbucker. Heavy amp type with enough gain that it sounds heavy but not so much as gain that it has too much noise/fret noise/feedback.
Use generous reverb and slight delay to round off the tone. That'll give you something to work with. Keep the mids low
Hello can u help me getting infinite sustain on this processor plz
Bhai Surjo . 2G oper ekta demo dile valo hoi. Actually is it good for stage programme because it may carry easily . I have a wish to purchase . Thanks
How many effects to be chained together?
Great video! Thank you!!!
Great tone man, and the stomplab sounds good to.
Thank you
This video was so helpful thank you and one question; my stomplab makes lot of noise, how do I fix it?
Thank you. Does it make noise only on certain patches or all the time?
@@SurjoBhattacharjee it does make sound only when I plug adapter but works fine with the battery but I went to store and it worked fine there even with the adapter plugged in...the interference is pretty annoying
@@manishpudasaini7006 Probably you dont have "ground" in your electric instalation.
Thank you
I made 4 patches but when i switch over patches, the level and gain of patch changes. For ex if i switch from U2 to U3, gain of U3 changes den again i need to adjust gain of U3.
Are you writing the patches after editing them? That's the only reason I can think of right now.
@@SurjoBhattacharjee Can i call you ?
Please i need your help. Can we talk?
Buddy I don't think it'll help talking to me. I just did the demo when I did it. I don't own the pedal and I don't have the pedal since I did this demo.
Will it give a good output in live shows and orchestra?? Please reply!!
Yes it will.
I've used it in live shows. It's pretty good.
Jab main adapter use karu tabhi vi kya battery ka jarurat hay.. Or kya battery hamesha rakh sakta hu uskay bad adapter use karsakta hu... Kona bolia please...... Thank you🖤keep rocking
Adapter use kar rahe hai to battery ki zaroorat nahi. Battery humesha rakhna acha idea nahi hai. Adapter hai to wahi use kijiye.
@@SurjoBhattacharjee Facebook main message kiya.. Check karkay bolia please 🙏
What chords are those?
Thanks bro, learnt heaps from your video👍👍👌👌
You're welcome bro
Awesome video! Rly appreciate. Thank u 😊😊
You're welcome
Hi Surjo, Just one question. For exampe in edit mode i choose a Cali 2 amp, or any other amp, now i want to put a blue drive on it. Is this possible or not ? Thanks for your answer.
I think that might be an issue since the amp/dr are in the same edit button.
@@SurjoBhattacharjee Thank you sir, just what i was thinking , I think go put a blues drive pedal in front of the stomplab and i'll get what i want. I bought this stomplab for my son, but next month i go buy the Fender super champ x2 head for me. Thanks a lot for your fast response .
Surjo, i just tried my Joyo American pedal in front of the stomplab 1g. Man, this is amazing. I got the most beautiful tweed tones i ever heard from my amp. Now i can in edit mode choose any amp i want and get with this combination the bluesiest tones i like. Perhaps you can make a video of this, because it is indeed an issue on the stomplab to put a drive on a chosen amp. Just wanted let you know.
Hello Surjo,
Can we change scale in this processor
I don't think so
what about direct sound to mixer?
if the sound is still good?
It's still good. Use an aux cable
@@SurjoBhattacharjee terima kasih abangku
Dada chorus effect er ekta video upload kro
Videos e dekho ekta Boss Chorus er demo aache
Is that a lipstick pickup on the neck?
Only a bridge pickup on this version of the melody maker
it's very useful. Thank you :)
You're welcome
You're a legend!!
Thank you.
He has the voice of an angel! Well done sir! 🙏
Thanks a lot ❤️
Most welcome
Cool
Thank you so much!! It helped me!😭😭
Thank you
Bro yr distortion sound kaise banega bta do please
Which gittar ur playing..??
Gibson Melody Maker
Thanks
Sir please show me how to delete the user patch
You don't delete, you just save over it.
Ok thank you
Hi surjo da tomar sathe contact korte chai...
Bolo
Ami new stomplab 2g niyechi
Kintu patch gulo moner mato korte parchi na
R volume pedal kichu kichu patch e kaj korche na...
Tomar contact number ta jodi hoi khub vlo hoi...
Ami kharagpur theke bolchi
This prosser ,huse noze,,very bad prosser,,,,