The instructions are very clear thank you. It would be great if you could elaborate and teach on each step of how things work the way they do in order to understand how networks work and how mikrotik has model it. Many thanks for this video either way
Hey Man Thanks A mill I went through like 5 tutorials and they didnt even work. this one you gave worked and little more steps but its understandable! Thanks
I just set-up a guest wifi using this very good instructional video. This comment is both to thank you and as an offering to the Algorithm Gods! Thank you for this tutorial, kind sir!
Thank You very much brother. It was very helpfull. I don't like video tutorials in general but Your's are awesome. Straitght to the point and really on the spot. It doesn't waste my time with some blahblah blah possible scenario stuff which makes those video tutrials a pain in the first place. Way to go bro!
my DHCP server in on a another router (RB3011) and my guest wiwi is on AP only (wAP ac). I can'r use from 2:48 (adress list), because all adresses are managed by RB3011. Can you tell us how can we do guess wifi when AP and router are separate please? :)
@@pulseathens how did you solve it ? i have pppoe client on out interface, so my nat masquarade rule is configured for pppoe-out1 interface, no bridge. Bridge is not important here i think.
Hi thanks for the video and wonderful work u r doing to educate I'm little confused what if I have mikrotik routerboaed rb3011 and it is attached with a switch with 10 access points now my guests will get WiFi signals from that access points I mean not only guests I need this for all persons conect to my network will get access of wifi but in limited resources and speed
hi there. I work for a company where a client is looking to setup a guest network on their MikroTik. However, we have a setup where the Mikrotik is setup as an Access Point, where an antenna operates as the primary DHCP host. Can this Guest Network setup be setup without the need of a local DHCP, and to operate with the Antenna operating with DHCP?
Great video. Thanks. What if i have for example 5 switches after router and every switch have different VLAN. And i want to connect some access point to one switch? Or, what if i want to connect two wifi access point on the same switch? Two guest wifi on the same VLAN?
hello amigo new for 2 weeks. i have a hex750br3 and does not include wifi. can you make a video how to make this work on hex? i guess is no diff but without the built in wifi. let me know if you can. thank you amigo. I updated the packages with hotspot and usernam thinking i can use it with radius. help will be greatly appreciated.
Another great video. But why do you create a bridge with only one port? Can't everything be done on the virtual wireless interface? Keep the good work.
@@time.7106 If i can make on background scan is because the single radio work on different frequencies in the same time. I belive if Mikrotik wan is posible.
I am trying to find a tutorial (Step by step) on creating an access point without DHCP server so I can add the new Mikrotik to my current router that already is handling the DHCP server, plus have an extra wifi interface for guests that can only access the internet and not the local lan. I have visitors that need wifi access but don't want to give my password for the wifi lan that I use in my home. Could this be added as a new tutorial in one of your next videos? Greatly appreciate it.
Hi and thanks for your videos: They're very interesting. I followed exactly all your steps (checked more than ones) and at the end I get to connect to the guest wifi, get the address via DHCP, but then there is no internet connection. What can I check? I've set my Mikrotik router as WISP AP and from the main wifi it's working fine and connecting to internet. Thanks
Yes. That is because there's no route. For internet acces you need add a route (nat) from de guest bridge to the internet, is the same process like the normal wifi.
You must add rule. Go "Ip" then "Firewall" then "Filter Rules" tab. Then "+" add rule. Chain forward, Src addres "your guest ip with sub" in this case "10.10.10.0/24", Dst. addres "your local ip with subnet" in this case "192.168.88.0/24" then go to tab Action and select "Drop" click "ok"
The instructions are very clear thank you. It would be great if you could elaborate and teach on each step of how things work the way they do in order to understand how networks work and how mikrotik has model it. Many thanks for this video either way
Hey Man Thanks A mill I went through like 5 tutorials and they didnt even work. this one you gave worked and little more steps but its understandable! Thanks
I just set-up a guest wifi using this very good instructional video. This comment is both to thank you and as an offering to the Algorithm Gods!
Thank you for this tutorial, kind sir!
Thank You very much brother. It was very helpfull. I don't like video tutorials in general but Your's are awesome. Straitght to the point and really on the spot. It doesn't waste my time with some blahblah blah possible scenario stuff which makes those video tutrials a pain in the first place. Way to go bro!
Thank you!
I did exactly as you did on the video but the guests can access devices connect to my private network..
What did I do wrong?
Other than this setup You have to set firewall rule to block traffic among guest and private network. Strangely, this tutorial does not cover that.
What's up? Thanks for your help!!! Worked like way i'd wanted.
my DHCP server in on a another router (RB3011) and my guest wiwi is on AP only (wAP ac). I can'r use from 2:48 (adress list), because all adresses are managed by RB3011. Can you tell us how can we do guess wifi when AP and router are separate please? :)
great tutorial very simple yet informative
Glad it was helpful!
Very useful, but internet doesnt work on the guest wifi network, how do you give internet access to guest wifi users?
Did you find the solution? I'm trying some firewall rules, but still not working!
You have to make the masquarade for guest wifi addresses. He forgot to mention that!
@@itdjordje How can it be done?
Thanks
@@itdjordje And YESS i found the solution .in NAT rule of guests change the ougoing interface to the bridge that the internet works for local users
@@pulseathens how did you solve it ? i have pppoe client on out interface, so my nat masquarade rule is configured for pppoe-out1 interface, no bridge. Bridge is not important here i think.
Will be great to show how to set speed limitation for guest network
Update: I found video on yuor channel about speed limitation. Thanks!
Hi thanks for the video and wonderful work u r doing to educate I'm little confused what if I have mikrotik routerboaed rb3011 and it is attached with a switch with 10 access points now my guests will get WiFi signals from that access points I mean not only guests I need this for all persons conect to my network will get access of wifi but in limited resources and speed
Great tutorial, worked perfect. Thanks
Your channel is very good and much educational, congratulations for the collaboration, I'm from Brazil. 😁
You are welcome
Thank you very much my friend! Great tutorial.
hi there.
I work for a company where a client is looking to setup a guest network on their MikroTik. However, we have a setup where the Mikrotik is setup as an Access Point, where an antenna operates as the primary DHCP host.
Can this Guest Network setup be setup without the need of a local DHCP, and to operate with the Antenna operating with DHCP?
This is excellent. I have a guest wifi set up and working but I don't have internet access using the guest wifi. Do you have any thoughts on that?
I see that you liked my comment but didn't answer my question. Is there a way to fix my problem that you can think of?
Great video. Thanks. What if i have for example 5 switches after router and every switch have different VLAN. And i want to connect some access point to one switch? Or, what if i want to connect two wifi access point on the same switch? Two guest wifi on the same VLAN?
It can be done.
how do i set the master interface to wlan 1??
hello amigo new for 2 weeks. i have a hex750br3 and does not include wifi. can you make a video how to make this work on hex? i guess is no diff but without the built in wifi. let me know if you can. thank you amigo. I updated the packages with hotspot and usernam thinking i can use it with radius. help will be greatly appreciated.
Why did you use VLAN in Tutorial 39?
The rest are the same so why did you repeat the same tutorial without a VLAN?
What is the use of a VLAN?
Another great video. But why do you create a bridge with only one port? Can't everything be done on the virtual wireless interface? Keep the good work.
It is an easier way to add more interfaces as per need.
Thanks for this tutorial, I managed to create veverything, nut O have to internet on the newely created ap.
Great video! Thank you
I did everything step by step but it didn't work for my hAP lite
Great. Nice. Haw i can make the guest on another frecuencie ???
Use a different physical WLAN. If you only have 1 radio you can't.
@@time.7106 If i can make on background scan is because the single radio work on different frequencies in the same time. I belive if Mikrotik wan is posible.
I am trying to find a tutorial (Step by step) on creating an access point without DHCP server so I can add the new Mikrotik to my current router that already is handling the DHCP server, plus have an extra wifi interface for guests that can only access the internet and not the local lan. I have visitors that need wifi access but don't want to give my password for the wifi lan that I use in my home. Could this be added as a new tutorial in one of your next videos? Greatly appreciate it.
Noted
Yardman?.... Bigup.....glad de Kno sa Yu a du yu ting
How to create hotspot wifi without the password and username and direction to the website?
Great tutorial !
Hey sir how can put bandwidth on guest wifi?
Will be doing a video on that soon.
Not working because guest can connect to the guest interface but have no internet
Thanks, that made it easy!
You are welcome
Hi and thanks for your videos:
They're very interesting.
I followed exactly all your steps (checked more than ones) and at the end I get to connect to the guest wifi, get the address via DHCP, but then there is no internet connection.
What can I check?
I've set my Mikrotik router as WISP AP and from the main wifi it's working fine and connecting to internet.
Thanks
Yes. That is because there's no route. For internet acces you need add a route (nat) from de guest bridge to the internet, is the same process like the normal wifi.
No internet access for Guest Wifi!
This is Strange
@@TKSJa Try this ua-cam.com/video/p6Y9-FLqvYc/v-deo.html
@@TKSJa i found the solution .in NAT rule of guests change the ougoing interface to the bridge that the internet works for local users
How to prevent the guest from accessing your local LAN ?
You must add rule. Go "Ip" then "Firewall" then "Filter Rules" tab. Then "+" add rule. Chain forward, Src addres "your guest ip with sub" in this case "10.10.10.0/24", Dst. addres "your local ip with subnet" in this case "192.168.88.0/24" then go to tab Action and select "Drop" click "ok"
You must creste a firewall rule for that
Good do a video soon
Internet does not work on guest wifi
Did you find the solution? I'm trying some firewall rules, but still not working!
internet dose work on my guest wifi network .....why ? how can i solve it ?
Ensure that you are able to browse before adding the guest wifi
myne also not working
Why use a bridge?
Easier
great instructions but i wouldn't say simple. So many settings....just to enable a guest wifi
Danke!
Thanks
You are welcome.
Pradeep bhai mikrotik me log mera wifi hack krte hai to kuch hindi me muje btaye ip kese add krte hai
thanks