Two Routers With The Same SSID's? (WIFI Network ID's) When You Can & When It's Not A Great Idea.
Вставка
- Опубліковано 28 вер 2024
- #NSaleOnUA-cam
In this video I explain when you can use the same SSID's in a WIFI environment and when it's really not a good idea.
(paid links)Here is the Networking Gear I use:
TP-Link N750 Wireless Wi-Fi Dual Band Router (TL-WDR4300) At Amazon: amzn.to/2Vrcxyx Or Ebay: goo.gl/8vm9U9
TP-Link AC900 WiFi Router At Amzon: amzn.to/2pm0Ie3 Ebay: goo.gl/f65q15
TP-Link WR940N Router (Upgraded) At Amazon: amzn.to/2NodxPu Ebay: goo.gl/DJEqCT
TP-Link N300 Router (TL-WR841N) At Amazon: amzn.to/2gdL8h8 At Ebay: goo.gl/wTW2tg
TP-LINK TL-WR841ND Wireless N300 Home Router Detachable Antennas: amzn.to/1GUSvRS Or Here At Ebay: goo.gl/FwoCRW
Cable Matters 160021 5-Feet Cat6 Snagless Ethernet Patch Cable, Pack of 5 (Black/ Blue/ White/ Red/ Green) At Amazon: amzn.to/2gdUg5k At Ebay: goo.gl/XAGhmJ
Various Storage Devices:
Seagate Portable 1TB External Hard Drive At Amazon: amzn.to/2SzXCQw Or Ebay: goo.gl/JeqiF4
Seagate Portable 2TB External Hard Drive At Amazon: amzn.to/2Asn3fT Or Ebay: goo.gl/FQ9QX1
SanDisk Cruzer 16GB USB Flash Drive At Amazon: amzn.to/2Vp4qm8 Or Ebay: goo.gl/AH9dAe
Sandisk Cruzer 32GB USB Flash Drive At Amazon: amzn.to/2CKIwCd Or Ebay: goo.gl/1hxZnX
Sandisk Cruzer 64GB USB Flash Drive At Amazon: amzn.to/2RsaSJD Or Ebay: goo.gl/m9T8mv
Sandisk Glide 128GB USB Flash Drive At Amazon: amzn.to/2s67V3d Or Ebay: goo.gl/wAatgZ
Sandisk Ultra Fit 256GB USB Flash Drive At Amazon: amzn.to/2s5x3Hn Or Ebay: goo.gl/fqUNpM
Toshiba Canvio 1.0 TB USB 3.0 Portable Hard Drive At Amazon amzn.to/2SEh0fd Or Ebay: goo.gl/vUzGcT
STANLEY 94-248 65 Piece Homeowner's DIY Tool Kit At Amazon: amzn.to/2SR7ZzS Or eBay: goo.gl/FYvMuy
Amazon Prime Membership Sign Up: goo.gl/ewmAV
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Facing Cam: amzn.to/2P9bazV Or eBay: goo.gl/7WkzYb
Overhead Cam: amzn.to/2E4kiF8 Or eBay: goo.gl/kqeoVv
Handheld cam: amzn.to/2Qmh2e5 Or eBay: goo.gl/KAiZyX
Video Software: amzn.to/2SjNKdf Or eBay: goo.gl/CdWBwG
Desktop Capture: amzn.to/2SgVaxQ Or eBay: goo.gl/LYNC3f
Mic: amzn.to/2KFj43r Or eBay: goo.gl/yC8uMC
Mic Wind Filter: amzn.to/2ScZdes Or eBay: goo.gl/HruSsJ
Lens: amzn.to/2Sj4S2G Or eBay goo.gl/C1z9vE
Lens Filter: amzn.to/2P2zN1n Or eBay: goo.gl/U3psNL
Wind filter for handheld cam: amzn.to/2P7TYuA Or eBay: goo.gl/wwRtEk
Selfiestick dslr: amzn.to/2TUR4gn Or eBay: goo.gl/Rtzrrd
Tool box: amzn.to/2E3r8dQ Or eBay: goo.gl/houqn4
Laptop stand: amzn.to/2E24dzH Or eBay: goo.gl/ZfXhT3
Studio mic: amzn.to/2Q2FO3w Or eBay: goo.gl/bHnT8Z
Tripod Neewer Professional 61 inches: amzn.to/2VnotkL Or eBay: goo.gl/GfNGGT
Neewer Lightweight Portable 66"/168cm Carbon Fiber Camera Tripod Monopod At Amazon: amzn.to/1rsQN5l Or eBay: goo.gl/AxonTQ
Tripod Neewer Alluminum Alloy 62": amzn.to/2LIbEwW Or eBay: goo.gl/ao5nss
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
02/07/19
Two Routers With The Same SSID's? (WIFI Network ID's) When You Can & When It's Not A Great Idea.
![[UA] Eternal Fire проти NAVI | EPL Season 20 Malta](http://i.ytimg.com/vi/chvlsDygrZM/mqdefault.jpg)
Please make a video of how to get our laptops/phones to always use the strongest signal from our 2 or 3 routers!
Here I was thinking perhaps in the second scenario, having 2 different SSID's, the gadet (phone,tablet) would be able to differentiate and choose the stronger signal router. Even so, although not ideal, its not too much trouble to reconnect manually to the stronger zone when you have different SSID's in place.
In regards to both scenarios, I think its best having different SSID's for each router in most cases as in general its uncommon to have an absolute dead zone in between 2 or 3 routers and in scenario 1 (the white area) unless your house is unusally long.
Great video Richard, as always.
Yes the overlap is the usual situation which is why I don't usually recommend using the same SSID by default. I made this video to elaborate on why I default to the "it's not a good idea" answer every time I am asked but also to show where it will work well (and why) and were it will work (badly) and why. I am considering a WIFI optimization video in the future as well. The variables are crazy so I have to consider a WIFI optimization video for a single router environments and another video for multiple router environments. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
if you use same SSID for 2 router simply check your device signal to find out whether you near or far from both router.. if the signal become weak simply turn off the wifi and turn it on again and BOOMM..!!! it will connect to a strongest router signal.
Great explanation of the way WiFi coverage works when using various routers. Thanks.
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Great video. IMO, the best way to get wifi throughout your house (on every floor, in every corner) is with moca enabled devices. If one doesnt know what moca is, please google it. It uses your existing coax already wired in your house. Yes this wont help someone if no coax in the house, but most homes already have it. The reliability is rock solid, speeds are super fast, and dead spots are a thing of the past, as well as those extenders that just don't work. Yes you need to buy moca enabled equipment as well to make it happen, but hands down its the best in my opinion.
I will look into this technology. Thank you for watching, commenting and the valuable feedback and support. I appreciate it greatly. All the best.👍😀
Just perfect!! The first to explain it all.. Valueable information!! Thanks a lot!
I do agree with your explanation and your advice to have different SSID for each router but for the sake of argument, it is not that critical for many who do not even bother too much to know what router they are connnected to so long as they are CONNECTED and it does not affect them of what they are doing unless they are downloading/uploading large file or playing high performance online game and they can notice the drop in the speed. This is the fact. In short, it is transparent to them if they can get what they want without noticing much of a hassle.
I have in fact tried both and it works fine for me even with large overlapped of the two routers with the SAME SSID especially for handphone/cellphone where it will always looking for a stronger signal of the available Connectable SSIDs that it can be accessed (with the right password).
Having said this, I do agree with you that it is advisable to have different SSID for each router for the reasons that you have mentioned.
Thank you for watching, commenting, the valuable feedback and the kind words. I appreciate it greatly. I am happy to know I could help. All the best.👍😀
Hi Richard, excellent video. Explained in a very simple manner for easy understanding.
In my home, my main router supplied by the service provider is a regular router. This router has been hardwire connected to 4 other routers ( repeaters) which are of the MESH type. I have right now a common SSID for all the routers. I have the following two problems:
A) Signal break and reconnection when I move from one Router zone to the next.
B) I cannot configure my Wifi Printer as it indicates multiple number of connection available with the same SSID. This is not supported by the printer.
I presume issue B) will be resolved if I have separate SSIDs for all 5 Wifi units (1 regular and 4 Mesh type). Please confirm.
As regards issue A, will I be able to avoid the signal breaks if I replace my carrier normal Wifi with a Mesh type Wifi. Please advice.
Many thanks in advance.
Mesh routers are supposed to handle this stuff for you automatically. Which type of mesh routers are you using? Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
Thank you so much for this explanation .. so i guess, that seamless wifi connection on the 9 floors company i work for , is basically ... you grab a point, and stick to it until it loses the connection... then instantly grab connection to the next one ... so there will ALLWAYS be that one small gap ? ..... im having issues in my 2 story house ... gunna give this a shot ..! thanx!
Richard, signal strength and therefore quality and speed of connection is not just related to distance, obstacles etc. it is also influenced by interference from other transmitting devices - I think the range of an AP will decrease with a second AP nearby - despite the fact they are likely to use different channels.
WIFI and radio signals are very malleable. They are subject to constant change especially at the end of the range. They are likely to use different channels, I agree but there is nothing inside most routers to stop them from using the same channel. BTW most people don't know this but there is such a thing as too much signal strength too. I am contemplating doing a WIFI optimization video in the future. Weaving the variables involved and the technical details that are important into a video will be a challenge to say the least. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Your videos always pop up when i want to learn something new about my router,
Liked and subbed
I was wondering, Whats the difference between having two routers ( or 1 router with extender ) both with same ssid And a mesh network ?
Are they both the same concept, or is there a benefit to having a mesh network like being able to connect to the strongest signal ?
Don't know if technology has changed since you made this video. My android phone seems to automatically shift wifi routers on same ssid when one gets weaker than other in the overlap zone edge when I turn on the select best network available option in the Wifi settings
Richard great video very helpful. Subscribed!
Awesome video really helpful. But I'm wanting to build a home application with 5 routers, but each routet is limited to 10 maximum available connections and after a 10th user connects, the client devices begin connecting to the other routers next in line. So I don't necessarily need automatic switching, just want to know if this Is possible to have the client devices connect and choose the router with lowest number of connections, within one given SSID.
I'm not sure why you're limited to 10 connections per router unless you're DHCP only is assigning 50 IP addresses. It can dole 250+ IP addresses. As far as SSID's and connection priority that is managed by the actual WIFI card in your computer and generally it connects to the first device that responds and that is not necessarily the same device every time, or the closest or the least busy unfortunately. That is the nature of legacy WIFI. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
I have my dsl modem router going to my room on 1 side and I have a range extender on the other side. But I don't know if i have the same ssid because the ip address is still the same but now i can access the extenders ip settings anywhere around my house.
Not sure what the point is of this. Same SSID or not the outcome is the same, weak signal at some point while you could have better. Thats why better practice is to have the same SSID with the same settings and lower the power output to decrease overlap.
Thank you for watching, commenting, the valuable feedback. I appreciate it greatly. All the best.👍😀
I was trying to do ip : mac binding in a similar 2 router setup. (different ssids)
Is it possible?
I can bind in the router.
But access point assigns a different ip.
Thanks that was helpful. My son was asking why I had 2 routers with different names and passwords. I’m not a tech person but I’m working from home now and my laptop was lagging a lot, I bought a deco tp link and set it up as best as I could. With different name and password. One question when you say the devices will connect to the closest router, is that an automatic connection? Or u still have to choose the most closest and plug in the password?
Thanks!
They will connect to the first router that responds, that is not necessarily the closest or the fastest router but with a mesh system like the Deco it should all be automatic without issue. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
Thoroughly excellent piece of work, sir. Information I can use. Now using different sides. One small point ..... am guessing where there is no deadzone occurring between same-name skids, then reducing 100% transmission power at setup could create one. Awkward though.
Sides.... ssids ...... but you knew that
...also skids, FFS.
Dead zones are great to have as it make transitioning between the two zones automatic, so if you can do it I would recommend you do. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
I HAVE 3 ROUTERS and one extender with SAME SSID and my devices always connect to the one wiht strongest signal if the siganl gets weaker when I move away it take 5 secs to connect to the other ruter that is closer so idk what you are blubering about
Hi Richard! I am Brazilian! I am using a Huawei Ax3 Pro as the main router and a TP-LINK Archer C6 in access point mode connected to the AX3 via a network cable. I only enable the 5ghz network on the two routers, and they have different channels, AX3 (147) and C6 (48), they are all at 40mhz and I don't notice interference. They have the same SSID and password. Lately my TP link makes wifi disappear and come back. Could you help me understand what's going on? Does the problem happen because the brands are different?
I would check for a firmware update on the C6. If it's available update the firmware and that will probably make it more stable. If there is no update do a factory reset and configure the router again. It sometimes makes a difference. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
So is the whole premise of WDS basically flawed then? As I understand WDS, it requires all the APs to share the same SSID and channel. I have 4 wireless routers in a WDS configuration and it doesn't work well. My APs support both 2.4GHz and 5GHz operation, there is no way to set up wired backhaul for the 3 remote APs and my clients are too old to support fast roaming. Is there any way to configure my network for seamless handover between APs e.g. when making video calls and moving around the house? I can replace my routers/APs or buy more of them but I can't replace the clients. Seems to me that Apple, as usual, with WDS over-promised and under-delivered
You can mickey mouse a solution but it will not be seamless as the old WIFI standards were not meant for roaming from one AP to another. There are now many "mesh" network solutions available to solve these problems for you and they are fairly inexpensive. Here's an example @ Amazon amzn.to/3sm2Rq2 (Affiliate Link). No this is a high end solution. I am sure your legacy devices do not require WIFI 6 so a lower tech mesh network like the Google Mesh @ Amazon amzn.to/3rs43ce (Affiliate Link) $69.00 so you have many options here but for $69 reliable solution, I would say a cheap mesh is your best option. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
What do you do if you to routers because of bad WiFi coverage. But you also need them to have the same ssid. So you don’t need to switch your connection manually to stream to chrome cast?
Thanks
You're welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
If I change the ssid as suggested, can I still keep the password the same?
I have 1 router as extender in my room and one repeater in the kitchen
In my room is the same address as the modem but in the kitchen it change the address
Do u have to sign in all your devices phone any wireless cams etc into the 2nd modem with the now diff name (u advised against same ssid) , even though password same , ive tried this and i get the impression you do , can u tell or clear that situation up please !! i didnt want to have to put all passwords into the 2nd modem just wanted it to carry on signal through into another area
If I'm on a video call from my tablet as I cross from sparky to sparky3 will my call drop? If so, how do you set up a network to seamlessly roam between access points?
I can't really say if it will or not. Some video software can take it some can't and some tablets switch very quickly as well. Give it a shot and see what happens. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
Hi sir, let me ask regarding the 2 router if should be same ssid #? Bcos few days ago i set one router extra to next room but if i going to 2nd room the connection weak, same in the 1st room? Should be same ssid # both router to get a strong connection sir?
I don't recommend using the same SSID on both routers and what is happening in your case seems to further my suggestion to just use two different SSID's. Thank you so much for watching, commenting and the very kind and words. I appreciate it greatly. All the best.👍😀
@@richardlloydusa thank you so much sir
You're most welcome. Thanks again! 👍😀
Subscribes done..
Thank you so much for subscribing to my channel. All the best.👍😀
would u answer a question i have for you good sir?
Good video but a bit long..
Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Thank you for the information sir. So basically we need "deadzone" to connect to the other router. When both router meet in the same area, my device will still connect to the first router that i connect.
This is my testing:
1. I connect to my router1. Then i move closer to router2, but in the same time i still get the signal of router1. I try to turn off then turn my wifi on again. And boom, i still connect to router1, even my router2 signal is stronger.
Its effect also with the other simulation. I connect to router2>move to near router1>turn off then on my wifi>i still connect to router 2.
Thats the poin of deadzone. And thank you again for the explanation sir!
Then, two different SSID, always is better.
Thats really great explanation. Thank you so much!
I have somehow created a second wifi signal like this by screwing around with my wifi network and I've had crap signal every since and I have no idea how to get it back to normal because I don't have access to the router the daycare attached to my place has it I made the signal somehow on my laptop don't even know how I did it either I'm soooooo lost and confused I just want to play warzone again I lag all over the place it's unplayable now
Contact IT support for the daycare and they should wan't to fix it once you tell them it's not working correctly(cross your fingers). Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
Hey, thanks for the very detailed video! I should mention, if you want the perfect scenario, you should have a little bit of overlap. For example, probably no more than 10-15 percent. That way, when you walk, and your device loses signal, it will automatically connect to the stronger ones. However, this may not work depending on your application. Of course, you could always power down one or some of the access points to diminish some of that crossover, but then you lose coverage other places.
Richard, do you have any videos showing how to use/connect a second router as a wifi range extender? While doing so is the second router physically connected to the first vis ethernet or wireless connected to the first router?
You can do it either way, physically connected or through WIFI though I always would recommend the hardwired solution as it is superior. My videos that show how to connect two routers either way (Cable or WIFI) essentially turn the joining routers into access points. Here are all those videos: goo.gl/VvKk5a Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Video is informational but at the end it is useless because it didn't solve the common problem of watching video of common ssid.
Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
Wish i wouldve seen this 1yr ago. I have the same setup as the last, 2 dif ssids. I had too much overlap. In the small apt. The better router picked up more devices but, its farther and lead to drops.
There are many considerations and variables with WIFI. I may do a follow up video on channel optimization as well as there seems to be much confusion on that important aspect of the WIFI spectrum. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
@@richardlloydusa yes please do that other video on channel optimization. I use the Wifi Analyzer app/program to see channel strength
17-mins-talk can compress to 1 min. Please concentrate to the main points.
Richard - love your videos. Have you done any videos that describe and provide info about home/office mesh networks? Also, are there any downsides of connecting two or more routers, I.e., is throughput impacted when multiple routers are being used?
I have not made a mesh network video as I do not currently own a mesh network. I may invest in that for a future video. If the WIFI is configured correctly there should be minimal impact when two or more routers are connected using a hard wire LAN connection. Understand that currently hardwired connections will faster and more reliable than WIFI. WIFI connected routers require the WIFI to be configured in an optimal way to avoid channel interference and give optimal service. I may do a video on this in the future. Mesh solutions like Google WIFI are now a viable solution for those who just want a plug and play solution here at Amazon: amzn.to/2I2hefD Or eBay: goo.gl/aGaoFH I have not tested one as of yet but it is another piece of the puzzle that I may invest in and shoot a video about. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Is it possible to have 2 wifi extenders in one house? We have one in the dining room, the router in a bedroom. We stream off Roku in the other bedroom and constantly lose signal or buffers. Was thinking I could put a wifi extender in our bedroom, would this work?
Yes you can have two WIFI extenders in the same location. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
hello richard i had an old modem and made it work as an access poiint but idk if i should really change the channel of the access point ( old router ) should i make it different than the main routers channel ? thanks :)
No offense man but you made this way more confusing than it had to be for these newbies
The response to this video has been largely positive. I actually made the video to answer a question I get about this all the time. Saves me time to point them to the video. Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
Richard I finally found a thorough channel. Thank you. Subscribed.
There couldn't be explanation any simpler than this. Thanks, Richard!
You're most welcome. I do my best to keep it simple but it doesn't hurt that you're smart too! Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
What's described is basically what everyone would expect and could extrapolate themselves.
What would be more interesting would be if it explained fast roaming and mesh WiFi.
i get other issues with ip when on same ssd. phone says cannot get ip
Thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Good explanation
Smart WiFi Selector app by Alexander Tartar will switch between APs with same SSID. It compares the signal strength of the various APs with same SSID but different BSSID and does a switch off/on toggle cycle of the WiFi. Wi-Fi Switcher by www.f1widget.com also seems to do this on Android Pie. 2nd app is free, 1st has trial period. All the other switchers don't seem to work with Pie.
Hi I have a question.
I have 1 tplink re350 range extender set up as an access point from my isp's fiber modem via straight connection. The access point is on the 3rd floor the main one is on the 2nd. Everytime I go up on the 3rd floor after my 2nd drops. It always says no internet connection or limited connectivity regardless of device type then connects after a few minutes. They have different SSID'S can you help me with this I'm anxious to know how to solve this.
Reason for getting an access point is that my 3rd floor is a deadzone.
Liked and subscribed
On my flat I have Router and an extender with the same SSID. but in the app I can see which devices are connected to... so I can distribute perfectly Alexa's TVs... and so..
A followup on my last comment. When the 3 routers are connected it is with CAT5 cables this would give each router full speed via the CAT5 back to the switch... is the correct?
Great video. thanks. So do you recommend we turn on "Connect Automatically" button in our laptops to get the optimal scenario as you showed? I have 2 routers each with 2 connections (one for 2.4 GHz and one for 5 GHz connection). so in my scenario I have these 4 possible connection points (Note these are fictitious names):
ROUTER24 = Office Router on 2.4 GHz Signal
ROUTER5 = Office Router on 5 GHz Signal
AP24 - Living Room Access Point on 2.4 GHz signal
AP5 - Living Room Access Point on 5.0 GHz signal
this way I can choose from any of the 4. usually 2.4 is fine for general internet needs and 5.0 is best for music and movie streaming and FAST up/download needs. If yo have them set to auto connect, will they? My house isnt that big (1400 sq ft) but wanted to have better wifi coverage in my kitchen as before I added the A/P the kitchen always had the worst signal as its the furthest point away from my office where I had the onlu rputer at the time. Now I have 2 points so it should be better.
I have same setup with Fios router and Fios extender. The extender clones 2.4 and 5G SSID automatically from router which is fine because I use different broadcast channels for all SSID to reduce interference so no need to have 4 SSID I only have 2.
ROUTER24 = Living Room Router and Bedroom Extender
ROUTER5G = Living Room Router and Bedroom Extender
But the Orbi mesh router uses SON which I hate for two reasons. One because I always use 5G band and don't want to connect to 2.4 band unless someone has older 802.11b,g, or first draft of n device. Two because most times broadcast will be the same across all devices with SON. Having 4 SSID is better than SON IMO but there is a way to split the SSID on an Orbi. With changing broadcast channels on routers overlapping is not a problem unless both routers are way too close to one another.
use one as DHCP and rest as repeater/ap. this video is using old tech. i have lots of locations where coverage literary overlap with 50%+ signals. all new mobiles and tablets smart switch in network loop. they connect to 80% network from 50%. they don't need to disconnect/reconnect like video say in overlap part.
Thank you.
Can one connect a Hauwei B315 router to a Mikrotik router. The Mikrotik router is used for the internet. I want to use the Hauwei B315 as a WiFi extender. Thank you.
Just this morning I set up a Wi-Fi extender on the top floor of my house to provide coverage into my back garden. This uses a Powerline adapter to provide backhaul to the router on the ground floor. It seems to work well except for exactly the problems you describe. They both have the same SSID so I don't know which one I'm connected to. So I could be down the garden still connected to the weaker signal from the router, when ideally I should be connected to the new Wi-Fi extender. A quick Google search turned up your very informative video and so I am now changing the SSID of the repeater so I know exactly what's going on! I've subscribed to your channel so I can learn some more. Thanks! 😀
Suppose I'm just a little bit too slow I'm trying to understand but with the two different ssids wouldn't I have to manually log on to Sparky three if I crossed into that zone and vice versa everything else that I've been looking at about hooking up two routers since I have to log on this has confused me perhaps you can help explain that
There's two ways it can happen. If you don't have over lapping WIFI zones, when you step out of one zone and into the other WIFI zone, your WIFI device will disconnect from the previous zone and connect to the next available zone that's available (If you have connected to it before regardless of it's SSID name) This is the best situation but rarely ever happens. There's always some over lap if not a great amount of overlap. WIFI devices are not really programmed to roam. They're programmed to hold on to a connection as long as possible and only disconnect if they can no longer communicate reliably.
The assumption being there is only one reliable connection available. So when you're in a WIFI zone with overlap from the last zone your WIFI client connected to, it wants to stay connected to the original WIFI connection regardless of what the available options are locally.
So if you name the SSID for both zones the same you NEVER know which one the WIFI client will connect to and is connected to unless you look at the connection and see that the signal is really weak and then you have to manually switch it anyway.
So by using different SSID's on your routers like, back porch, garage or upstairs for instance, you always know which one it's connected and you can easily chose the connection you want if it does not connect to it automatically. Here's another bonus about different SSID's you don't have to give the YouTubing, Streaming, High bandwidth hogs in your house (don't know who these people would be 😁️? ) access to WIFI zones you don't want them using simply by not giving them the WIFI password to those routers! Another bonus is that they will wonder beyond the range of the available WIFI Zone. LOL Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
My son has two sons, could he have 3 routers each son would have a router, their name. Can it be set up so it would only connect to their on router Dad could connect to all three routers. The routers would be close to the computer, they have no CAT5 cables run through the walls. Thank you very good stuff.
Hi Richard, can you please think about posting a video on how to set up VPN designated router plugged into ISP modem/router, yet providing VPN service with Internet access? I think this topic might be of great interest to many of us, and especially that we all rely on the internet with many transactions and streaming.
Your explanation of how two routers work together is excellent. You have great ability to distill complex issues into easily understandable concepts. Thanks for helping me maximize my home network.
Hi Richard, your video always very helpful. Is it possible conneting 2 routers over Wi-Fi?, Without using ethernet cable
You are most welcome. Yes it is possible. I have videos showing how to do that here: goo.gl/ZmntvD Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
As a noob at wifi and home networking i found the video a good explanation. But, now it confused me on what im trying to achieve. Tri-level house wanting wifi in basement etc. I can connect to my Nighthawk in most areas, but signal gets weak. I want to walk to any point of the home with full signal strength without having to "Switch" from one "Sparky" to another. Yes i understood the part about overlapping and being able to see which router im on, but therein lies the problem...i dont care, lol..i simply want full signal anywhere in my house, without having to look, think or anything...i want it to be totally auto...I was told access points would achieve this but according to this video, it will not. ?
I suggest investing in a mesh network system like this at Amazon(paid): amzn.to/3SjL9z9 This will solve all the issues you are concerned about automatically.
Thank you so much for commenting, watching and the very kind words. I appreciate it greatly. All the best.👍😀
how do I make my devices all connect to the same NAS server if all the devices are connected to different SSIDs?
I have two story house and main router is connected on Top floor and AP(secondary, DHCP disabled) router is connected to the ground floor.
(1) When I keep two different SSID with overlap coverage--- let say I started facetime call at top floor and started walking towards ground floor,phone beeping me "reconnecting massages" when signal are getting weaker, and reconnect when little more optimum level reaches for secondary router .
(2) When I keep SSIDs same for both routers my transition always went smoother without loosing call for a seconds.......So unlike author of this video who likes two different SSID , I like same name for both SSIDs.
Even in my office with more than 100 employees , they use same SSIDs for all routers (more than 10) so once you get connected you stay connected throught the office time, all your Iphone X do is smooth transition to stronger signals without letting you know .
Little more jelly on your penute butter sandwich: Now smart routers are coming with Merge SSIDs options. So as author said router just lets you in as client , it does not care about the signal strentgh but now onwards your router compare signal strentgh and switched you from 2.4 ghz to 5 ghz automatically if you have option enable. Now over here contradictory situation is waht I used for my router. Instead merges SSIDs , I connected my work laptop to 5 GHz band and other devices on 2.4 ghz so my wok laptops gets more bandwidths, as work is worship.
Every office I have worked in had a mesh solution using the same SSID so I would believe your office would be the same. WIFI at home is evolving and mesh technology is migrating there too. But the majority of legacy and older EIFI routers do not have that technology. I may do an update video in the future to supplement this one with the changing technology landscape Thank for the PB sandwich. All the best.
great explaination, but what if the person is not tech-savvy and he doesn't know the different between 2 router & 2 different SSID? he just use the weak connection until it disconnect and connect to the better wifi connection? but between that time it just lost some productivity time due to it. Do you have any solution for that? thank you.
You're most welcome. The solution is a mesh network here's a link to one highly rated system on Amazon(paid): amzn.to/3OjaeYH or this one on Amazon(paid): amzn.to/3OxBfrR
Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
(Affiliate links. Helps me on UA-cam and does not cost you any extra if you use them)
Thanks for visual explanation on this Topic...
However how does it matter if I have 2 different SSID on both example? as far as concern all my wireless clients has those SSID and Password saved. The movement going from dead zone to another router in the first example still handshake to another SSID (which makes more comfortable to know that my client has now connected another router) ans same for the 2nd example where I can manually choose either of better signal SSID/router. Hope it make sense
You're most welcome. If it works for you that's great! Go with it. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Great video, thank you very much!
I got one question: can I connect two Wi-Fi Range Extenders (TL-WA855RE) to my Router with different SSID's? Thank you
Thank you, great video! But I have one question if you don’t mind. I live in a 3 story home that has pre wired Ethernet outlets on each level and my ISP router is on the ground level with a second router(nighthawk ac1900) that I have on the second floor and set as an AP. The AP router is direct connected to the Ethernet port and then I have my tv, gaming console etc. all hardwired to the AP router. My ISP router and AP currently do not have matching SSID. I’m only two days in but currently we connect to the AP and we have a strong Wi-Fi signal on every level of the house. I was going to change the SSID’s to match but after watching your video it seems like I may be better off leaving them with different names? Also should I have my second router set as an AP? would a bridge or having it run as it’s own network be better? I’m not very good at this so I apologize if I butchered the terminology.
I usually go with, "If it's not broken don't fix it." You can experiment if you wish. I leave the routers on their default settings but again you can experiment to see which settings give you a better result. Different equipment and environments affect performance in weird ways. Thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀
Is it possible to have 2 wifi extenders in one house? We have one in the dining room, the router in a bedroom. We stream off Roku in the other bedroom and constantly lose signal or buffers. Was thinking I could put a wifi extender in our bedroom, would this work?
Yes you can have two WIFI extenders in the same location. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Alexa won't work. I think you'll need a mesh network for that
I watched your video about eight times before I got it right and I truly thank you for your video. In your video you taped over the Internet Port "in" on the secondary Router. I have found that instead of taping over the port I plugged a "Crossover Adaptor" and have had no problems with using it.
You're most welcome. I'm glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
what's the solution then to avoid the conflict but i don't want to see two networks on my device
If you want to use the same SSID on all the routers then the best solution is to have them far enough apart so that there is a dead zone between the routers so that your device will disconnect from the original router and connect to the nearest router automatically when you change locations. Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
What about if I have two routers that are the same model provided by the same internet company. The only difference is the passwords. Both will work singularly without any configuration just as long as I'm using the correct password for each router. Does that simplify things if I want to use one to extend the WIFI signal strength?
If it works for you then go for it. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Great video. Explains a lot in simple English. Excellent 👍🏼
I have a summerhouse/man cave at the bottom of my garden. The main router WiFi doesn’t reach down there so I have run a long Ethernet cable from the main router to the Sky Q Minibox in the SH. I now have Sky TV inside and internet access. I also have Sonos speakers that sometimes I like to link with the speakers in the house so am i right in saying that 2 routers with the SAME SSID is the way to go? Phones and tablets will stay connected when walking from the house to the SH and with all the speakers on the same SSID I can control them all from my phone/tablet. I’m thinking that if the SH speakers were connected to one SSID and the house speakers are connected to a different SSID I can’t control them all from one device at the same time. Your thoughts please?
Steve
In this case the same SSID will not probably not be an issue as the two networks are so far separated. Try it and see if it works for you, you never know the two devices may be able to communicate with each other. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
thank you, sir! 😊
You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
Thank you very much, it is very well planned and documented video. I have received all the answers that I was looking for. I have watched bunch of other videos showing all the shortcuts but doesn’t mention the distinction of two different ssid’s and the purpose. Especially, don’t even mention about clients do not switch over to highest signal strength. Thank you again, subscribed. All the best from İzmir, Turkey.
Great video. But you could actually see which router you are connected to. Just look at the signal strength
I am the sys admin so I would rather use different names. My 2 have different capabilities too.
Configurations will vary with situations and environments. This is general guide. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
All my wifi go completely down if two ap's are too close.
I have a Question if you help me i have 2.4 Ghz router home WiFi network we are all guys all have smart phone bi one have laptop and computer we connect 11 phones at a time i want to connect more 3/7 phone at this my wifi can possible all can use net at same time i mean 17 smart phone can use internet at a time on one router
Sure that is possible but if they are using a lot of data (bandwidth) it will probably be slow for all of them but it will let all 17 smartphones to connect. Try it and see what happens. You never know they may be fine with it. But seeing as you have 17 people using it. I suggest buying a faster router and increasing the Internet speed on your service to make it a better experience and ask them to pay you $5 month for the upgrade. That's $85 a month if they all pay and you should have a lot less bandwidth issues. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
Great video, very well explained! Thanks for putting this up!
You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
So really we won’t see seamless transition to the strongest signal until the Wi-Fi rules in the clients change. Thanks, this saved me from wasting any more time wondering if the different ssid on my access points were preventing a smoother handoff!
Correct. Mesh systems "claim" to have fixed this problem but I hear complaints about them too. You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
oke , but why should you want to know to what sparky you are connected? i mean , is it worth the drops ? With 2 ssid , you can just walk from 2nd floor to bottom floor, while having a whatsapp call, without any interrupt
Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
Great vid...I'm struggling with repeaters across the house usinvvghe same ssid....
don't use repeaters..they cut your bandwidth.. use wired range extenders instead (you can use your old routers instead)
I don't entirely agree.
With older devices this might be the case, but from personal experience and reading up on some standards; latest firmware for phones (particularly Android) there are features that can be enabled/disabled to allow your devicr scan for the best network to connect to (weather same SSID or not - it distinguishes the networks on BSSID/MAC address).
If your phone doe not have such a feature (outdated firmware) there are apps that can be used to allow the wifi to switch over to the best networl, such as wifi switcher
weather?
Great explanation. After watching video, it is obvious there is no reason to have the SSIDs the same.
With the newer mesh routers, using the same SSID is preferred.
Correct. Mesh routers work in tandem with each other and hand off the client to the next router efficiently but regular routers can not do that. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀
Richard, thank you for your vids. They have helped me get pretty far. Maybe you can help with the last of my dilemma?
My goals:
1. wifi coverage throughout larger home/multiple floors.
2. Connecting wifi smart items to a single network. Google home, Google mini, 8 switches, 3 chromecasts, doorbell camera, three cell phones with wifi calling and google home app. etc.
3. Setting wifi printer with fixed ip address 192.168.1.52 outside DHCP range in order to reduce loss of connectivity between resets etc. Also reserved this ip address specifically for the printer.
4. Reserve within the DHCP range ip addresses for each cell phone in order to reduce loss of phone connection over wifi.
With your help, I have already:
On router (main router with cable modem attached) reduced DHCP range allowing space for non-dhcp ip addresses. Range 192.168.1.3-49
Main router ip 192.168.1.1
wifi network ssid "jimbob", channel set to 1
On 2nd router, set to Access Point (AP)
Turned off DHCP
Set ip to 192.168.1.2
wifi network ssid "jimbob", channel set to 6
The first thing I notice is that my phone when connected to the main router connects with the desired reserved ip address 192.168.1.13, but if the phone connects to the AP, the ip on the phone changes to 192.168.10.103.
Is there some setting I can change to force the phone's ip address to the reserved ip, even if the phone connects to the AP?
Where does the AP come up with the 192.168.10.103? since DHCP is off in the AP?
Bottom line is that I would like to connect all my home's smart items, including the controlling app device (phone) to a single network (as this is the only way to reliably control them). Some of the devices are outside the range of any one router/AP.
You are most welcome. I have seen this issue before. I am guessing you have what I call a "rouge DHCP server" running in your network. Are you connecting to WIFI using your SSID and password on that phone? If so then there is another DHCP server running in your network and it is assigning the wrong IP to your phone.I had this happen when I plugged a VOIP phone box into my network and it had a DHCP server running in it. You can troubleshoot this quickly by shutting down one device at a time in your network and reconnecting with your phone every time you do so. When you shut down the device that is the "rouge DHCP server" your phone will no longer get that IP address and it probably won't connect either. I hope this helps. Tell me what you find when you do this please. I may make a video on this problem as it is a real pain and for most people a very hard problem to sort out. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀
You hit it exactly right! I found my VOIP adapter was where the long cat5 cable was plugged into heading to the AP. Removed the cable from the adapter and plugged directly into my main router. Vwala the ip addresses fall into formation when connected to both the main router and the AP. Thanks for your help, I was pulling out what little hair I have left.
"The rouge DHCP server" strikes again. This is one of those problems I solved on the phone when I was a network "specialist" for an IT support company. Glad my experience helped you sort it out. Thank you for watching, commenting and the valuable feedback. I appreciate it greatly. All the best. 👍😀
on the second router (AP) is the Hard connection in the WAN port or one of the LAN ports?
2 SSID with same name 1 SSID on 1 router and 1 repeater/extender (roaming)
Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀
Hi Richard. Thanks for the video. This is exactly what I was looking for. Is there any way to connect based on the strength? Like in Hotels or multi floor offices?
It's possible, but that requires a mesh network to have it switch automatically. The WIFI standard does not have the ability to determine and switch to the strongest signal. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀
802.11r helps with wireless network confusion.
Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀
What would you recommend if I want to handle a google voice WiFi call between two routers or access points without the call dropping during the handoff? For example I have a router in my office and a router in my garage and I'll be on a call in the office and I need to go out to my garage. The call quality always degrades and then drops before connecting to the garage WiFi.
You may need a mesh network solution to handle this situation. Even if you used the same SSID and password and overlapped the zones. There would still have to be a drop of one router to the next router. Google has a reliable mesh solution but do your research and see what you come up with. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀
@@richardlloydusa I was also considering the Ubiquiti access points. I've been hearing a lot of good things about them and it'll also be a good learning experience to set one up as I always have customers asking about good WiFi setups in their office.
Hi Mr. Richard
Your explanation was amazing I really like it and I like all your vids on this channel god bless you keep it up.
Basil from Palestine ✌
Great basic video ! Poor man’s mesh :)
Keep in mind this only applies consumer grade systems with no WiFi controller.
Commercial systems with multiple AP’s and an actual WiFi controller will watch the client signal strength and actually move the client over to the next AP automatically.
Hi Rich and thanks for the video,.. its exactly what I needed. In my case,... I have two TiVo units. Each is connected to a different router. If each router has a different SSID, the TiVo's cant seem to connect to share files. in my case, it would seem I need to have the same SSID on both routers to make the TiVo's believe they are on the same network to share files. Does this make sense, and would you agree with my assessment?
Keep it up big guy!
Hey Richard!! That was a lovely and very informative video!! Wish I had found your channel earlier!! I have a question tho. I have a router at my home and a wifi extender of tp link Tl-WA850RE and it has an ACCESS POINT operation mode in it. Now i was using it in its default mode i.e RANGE EXTENDER operation mode wirelessly and it was working fine. But it slowly kept getting worse and now gives slow speed. So I wanted to change it to AP operation mode. Now I took an 30 meter ethernet cable and plugged one end in the lan port of my router and plugged another end into the wifi extender and turned the extender's operation mode to ACCESS POINT mode. My question is WILL IT NOW WORK AS A WIFI EXTENDER OR AS A WIFI REPEATER? WILL THE BANDWIDTH BE AFFECTED IF I CONNECT TO THAT AP? WILL I GET SLOW INTERNET IF CONNECTED TO THAT AP?
I prefer having same SSID in signal overlap case, so that whenever I found my device is getting weak signal, I will just switch off and on the WIFI and it will choose the closest access point. In case of different SSID, I need to choose the specific SSID which need more steps then just switching off and on the WIFI.
Thank you for this! If you have two places further apart - like a house and then a cabin in two different towns - can I assume it is fine to use same SSID and password on routers very far apart? I assume so because you'd obviously have a big "zone of no connection"....
Great explanation, thanks..
Great video!
Demonstrated really well and easy to understand thanks Richard
You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. I made this video to help people just like you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀
This was really helpful, thank you. This is exactly the challenge I am facing! One question though - can you link two identical WAPs to create a mesh with the same SSID?
Hi. Thank you Richard. Your videos helped me a lot. Specially the one where you explained how to connect 3 routers. I have a question though. I've 500 meters area to cover in 1 direction. I connected 5 routers in daisy chain. I want to use same SSID. Workers will connect to any of router but if they go out of range they automatically connect to my other router without entering password. Is it possible?
I love your videos, they’re great. I have heard that clients are not selecting network using same methods. Eg iPhone also prioritize on preferred network or often used - is that correct?
Looking forward to you review mesh network !!
Thank you very much from Venezuela Richard!
You are welcome! A big Howd'y from Texas. Glad you enjoyed it. Thank you so much again for commenting, watching and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀