Repairing of non-working Energy meter Atorch S1-B/W/T/H
Вставка
- Опубліковано 8 вер 2024
- #ErCanEverything #Repair #EnergyMeter
🔥In this video I will show you, how to repair the Atorch energy meter very easily and quickly
🔊You can find the featured products here👇 (affiliate links)
📌Kaiweets HT118E Multimeter: s.click.aliexp...
📌220V Attorch Energy Meter: s.click.aliexp...
📌Fnirsi 1013D Oscilloscope: s.click.aliexp...
📌Hot air soldering station: s.click.aliexp...
📌GVDA GD300 Soldering iron: s.click.aliexp...
📌Sequre S60 Soldering iron: s.click.aliexp...
Try to break it in half, it looks like an inductance and not a resistance!
You are right, I was wrong there it is 2.2mH inductance🤦
This is not a resistor. It was inductor.
Elinize sağlık
Teşekkür ederim Dostum🙂🤝
Ce n'est pas une résistance.,mais une inductance
Yes, you are right, I was wrong there.
It was a 2.2mH inductor🤦
Great tutorial ❤
I'm glad you liked it my Friend🙏🙂🤝🍀
Great video, thanks
Great repair Brother 👍
Thank you Brother,🙂🤝🍀🍀🍀
Bom dia parabens muito bom
Good afternoon, thank you my Friend🙂🤝🍀
lovley share
Very good video! Don't you think that you have put a very small resistance? The resistor that you have removed seems to be 1W, while the one you have put in seems to be 1/4W. Thanks for sharing.
I'm glad you liked it my Friend🙏🙂🤝🍀
Yes, I put a small resistor because I didn't have 1W, but when I measured the current it was about 5mA and it didn't heat up.
But it is recommended to put 1W.
@@ErCanEverything Its not a resistor, its a coil... look at the symbol on the circuit board, and compare it with the ones for the missing relay elsewhere.... Thats a broken inductor you took out, not a resistor.
Of course, replacing it with a resistor still gets the thing working and in fact you could have replaced the thing with a wire link and it would have still worked. But the reason that old "resistor" is so big is not because it is a 1W resistor... its because its really an inductor!
My mistake is I mistook that 2.2mH inductor with a 2.2K resistor🤦
@@fredbear3915exactly this!
You replaced fusible resistance with normal resistance. 😂
The burnt resistor was more powerful. The new one can overheat and also fail.
Nice! :)
I think you just replaced the current shunt with something that is not a current shunt….
After some research I found out that it's a 2.2 mH inductor and not a resistor.🤦🙂
👀👀👀👀👀👍👍👍👍👍👍👍👍
😉👋👋
be careful on handling that lcd display, don't be to careless on fliping them, its waffers like wire can be easily torned😰
I don't know how many times I bent it while shooting and think it wouldn't work, but I was lucky able to mount it without damage.🙏🙂
Your body not mine, but please disconnect power board from wall if you're going to put (BOTH!) your bare hands next to those exposed active & neutral like that.. one wrong move and your heart's in the way..
And this is how the Chinese will not sell another meter.
This unit burned out at unstable voltage because I had connected a powerful inductive load
2:13 и 6:28 не самая хорошая идея... и ещё вы резистор слабой мощности впаяли