How to solder feeder wires to track. Part4
Вставка
- Опубліковано 7 вер 2024
- Welcome, to this quick video, in which I'll show you one of the most effective ways to solder feeder wires onto your model railroad tracks.
Watch all videos in playlists: • model railroad tutoria...
Buy me a Coffee: www.buymeacoff...
Join my Discord server: / discord
Affiliate links:
Rail Joiners: amzn.to/2R9Yj49
Peco HO Code 83 Flex Tracks: amzn.to/3m3qW11
Gorilla Wood Glue: amzn.to/33cSSqC
Flush Cutter: amzn.to/35iyFT1
Soldering Iron: amzn.to/35huB5x
The music I use, perfect for small UA-camrs. www.epidemicso...
Disclaimer: Some of these links are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
First time I ever saw using clay to hold the wire in place. Great idea.
Great video. Nice and easy to follow.
That's great to hear! Thanks! 😃
After stripping the wire, twist the strands together before soldering. Also use a needle nose plier to bend the wire to fit close to the rail before soldering.
Yes, this isn't a video I'm proud... I'm probably gonna remake it soon, because it doesn't show good techniques.
Very nicely explained. If you could explain the intervals of wiring for a bigger project
Thanks, That video is coming soon!
Already did this on my n gauge layout.
Part0 (Introduction): ua-cam.com/video/QGUUvS_xoAQ/v-deo.html
Part1 (benchwork construction) ua-cam.com/video/8rN1G8WOxZE/v-deo.html
Part2 (installing track-bed) ua-cam.com/video/vXOdekHitu0/v-deo.html
Part3 (How to lay flex track) ua-cam.com/video/FoWxeKb_mlg/v-deo.html
Part4 (solder feeder wires to track) ua-cam.com/video/6OBjrTJ7s4M/v-deo.html
part5 (making your own rock molds) ua-cam.com/video/pggqzIaKVdQ/v-deo.html
I like to solder the wires to the bottom of the rail so they are invisible.
What did you think of the music?
I liked it a lot!
I am very new to this hobby I was wondering how I attach track mine do not snap together
Not sure I understand....you're using flex or snap?
Its ok but the soldering job couldve been better. First, flux the rail, then tin the feeder and form a J hook on the wire to be soldered. Attach the feeder to the rail and solder away.
or try wire glue,there is no chance of melting anything
You are supposed to tin the track first.
Yes I know. When I made that video I was not very good, the video is a bit misleading... I'm thinking of remaking the video, do you think I should??
@@TheCreativeModellerHO
If you could remake it that wound be very helpful.
Maybe add in twisting the wire before tinning the wire
Tin the rail
How to get a good joint. The one in this video looks a bit sus.
Cheers
they never stick, ever