Pilot Rc slick 74” radio installation.
Вставка
- Опубліковано 26 лют 2021
- Hi guy’s.
Starting from the back Single elevator servo Savox SV-1270TG with 1.5” arm 35kg.
Rudder savox Sv-1270TG 4” arm
Left and right Ailerons 1.5” arms.
Receiver spectrum AR8020T.
Bavarian Demon cortex.
Spectrum 120Amp HV ESC with fan.
Xpwr 35cc with Blazing star stand-offs.
Running 21x10 falcon prop.
Thanks for watching!
I like it , love the colour , looks great mate , bet you can't wait to fly it ........................
Yeah looks like 22/6 before it takes the air got 3 for Maiden can’t wait 😊
Excellent
Thank you for watching my videos and subscribing to my channel.
She's a beauty 👍
Hi there. Yes she is a stunner and can’t wait to test flight her once the lockdown is over. And thanks for watching!
So the pull-pull, is it supposed to be a cross or a parallel cable?
Hi James the pull pull System it’s supposed to be a cross don’t do it parallel because it will rub onto the airframe at the side of the exit..do it across and you’ll be fine with it!!
Hope that helped and thanks for watching the video!
Hello Danny, my engine is 190kv in a 78" pilot. Which battery do you recommend?
Hi alberto. First I need to know what make of motor is it? Second I need to know what Prop you are mounting with the motor?
@@dannyporter888silverfox8 Hello Danny, the engine is sunnysky 40cc and ESC hobbywing 130A
Hi aberto what size prop are you using?
@@dannyporter888silverfox8 Was I thinking 21x10?
Hi aberto.. if you are running 12s with it then go with ether 60c 4000mah or 60c 4500mah because weight to power ratio that’s good on 3D flying if you run 5000mah then it will start to feel on Heavy side. I have the same set up but using castle creation ESC ON a Duelsky GA4000 on a pilot Rc Extra 330. Hope that helps aberto and fly safe 👍
How much is the total weight ready to fly?
Total weight of the airframe is 4.9kg (10.9 lb) with batteries 12s 4000mah 60c total weight is 6kg (13.5 lb) thanks for taking an interest in the video and thank you for watching! Hope that helped.
@@dannyporter888silverfox8 doesn't pilot-rc say its 5200g flight ready?
Hi Julian. Think on the website it may say that but that all depends on what lipos and running gear you have in ie motors servos and the amount of glue you put in.. no two air frames weigh the same.. fly safe Julian
mate that plane needs a powerbox thats why you cart set the elevator up properlty
Hello Michael. Thank you for your advice. I can set the elevator up ok with the transmitter I have because all the settings are done in my transmitter and is set up ok. Fly safe Michael. 👍
I just don't understand why do you need gyro...???
I use a gyro on windy day if I don’t want to fly 3-D all the time.sometimes I just fly on a study day which most days are very windy in uk and if I let someone else fly my plane is easier for them with the gyro in on a windy day it takes the bumps out of the airframe for a none 3D flier..I know a gyro doesn’t take affect when you fly 3-D but I don’t fly 3-D all the time. Sometimes I go flying on a study fun day in UK mainly is very windy and it just takes the bum out of the airframe if I let someone else is to have a go with it!
@@dannyporter888silverfox8 Im nothing judging you by the use of the gyro. I just don't think is something to use on a sport flier or 3D airplane. Since most of the days are windy there, I kind of understand. But hey, if you are having fun, thats what matter. Cheers
Thank you for your understanding my club fellas like to have fun with my planes too and thank you for your interest in my video Channel.